High Temperature Constant Wattage Heating Cable

KE Series

^MXN296.00 KE4-120

HACER PEDIDO

Continuous Exposure Rating up to 500°F
Low Watt Density
Parallel Resistance Heater
Cut-to-Length at the Job Site
Constant Watt Density
All Common Voltages Available
Moisture and Chemical Resistance
Continuous Electrical Ground
Designed for freeze protection and process temperature maintenance.

Sistemas de cables de calefacción eléctricos - Ver Productos Relacionados

Descripción

The KE Cable heating element is tension wrapped and covered with two layers of nonflammable Polyimide Film applied in reverse directions, then heat fused for moisture protection. A stainless steel and tinned copper sheath is then added for additional protection and electrical ground return path. The sheath is enclosed in a minimum 20 mil PFA abrasion and chemical resistant extruded jacket.

KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

Max. Circuit Length**-KE Series

Power	120V	208V	240V	277V	480V
4 Watts/ft	349'	606'	699'	806'	1398'
8 Watts/ft	247'	428'	494'	570'	988'
12 Watts/ft	202'	350'	403'	466'	807'

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

Prices below are per foot

4 WATTS/FT

KE4-120

MXN296.00

Disponible en: 9 Semanas

high temperature, constant wattage cable, 4 W/FT, 120 V

KE4-240

MXN615.00

Disponible en: Disponible

high temperature, constant wattage cable, 4 W/FT, 240 V

8 WATTS/FT

KE8-240

MXN615.00

Disponible en: 9 Semanas

high temperature, constant wattage cable, 8 W/FT, 240 V

12 WATTS/FT

KE12-120

MXN302.00

Disponible en: 10 Semanas

high temperature, constant wattage cable, 12 W/FT, 120 V

KE12-240

MXN615.00

Disponible en: 10 Semanas

high temperature, constant wattage cable, 12 W/FT, 240 V

Accessories

KE-UC-KIT

MXN1,930.00

Disponible en: Disponible

Termination Kit (for KE Series)

KE-KC-KIT

MXN1,930.00

Disponible en: 9 Semanas

Termination Kit (for KE Series)

FE-UC-KIT

MXN1,885.00

Disponible en: 10 Semanas

Termination Kit (for FE Series)

FE-KC-KIT

MXN2,020.00

Disponible en: 10 Semanas

Termination Kit (for FE Series)

SK-KIT

MXN930.00

Disponible en: 9 Semanas

Splice Kit

FE-SK-KIT

MXN1,370.00

Disponible en: 10 Semanas

Splice Kit (for FE Series)

RTV-SS

MXN399.00

Disponible en: 9 Semanas

Silicone Sealant

Ordenar Por Número de Parte

Número de parte

Cant.

Número de parte

Cant.

Todas las cantidades que se muestran en MXN
Nota:
*Price per foot. When ordering specify desired length in feet. 25 foot minimum.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F. To complete your system the following accessories are recommended: (1) Termination kits for KE cable, (2) control options - we offer complete selection of controllers and thermostats.