Programmable Step Motor Indexer/Drive

3540i

^MXN18,995.00 3540i

HACER PEDIDO

Provides Up to 3.5 A per Phase and Microstepping to 50,800 Steps per Revolution
Accepts 12 to 42 Vdc Power Supply
Connects by a Simple Cable to Your PC for Programming (Cable Included)
Microsoft Windows™-Based Software for Easy Set up and Programming
8 Inputs, 3 Outputs
Optional Man Machine Interface (MMI) Allows Operator to Enter Distances, Speeds, Loop Counts and More
Compatible With Multi-Axis Controller HUB 444
Optional encoder + RS485 daughterboard
Sample Motion Programs Available by Request

Transmisores y motores - Ver Productos Relacionados

Descripción

The 3540i is a programmable step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt microstepping amplifier. The 3540i includes Applied Motion's easy to use Si Programmer™ Windows software for the rapid development of stand-alone motion control programs. The 3540i can also be commanded in real time from a host PC or PLC, using the Si Command Language™ (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

For multi-axis applications, up to 4 Applied Motion Si™ drives (stepper or Servo) can be networked using a single SiNet™ Hub. The 3540i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays. A daughterboard is available which provides an encoder input as well as an RS485 interface.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

3540i

MXN18,995.00

Disponible en: 4 Semanas

Programmable step motor index drive

Recommended Motors

OMHT17-075

MXN3,245.00

Disponible en: 10 Semanas

NEMA 17, 62.8 oz-in holding torque

OMHT17-275

MXN2,380.00

Disponible en: 4 Semanas

NEMA 17, 62.3 oz-in holding torque

OMHT17-278

MXN2,815.00

Disponible en: 2 Semanas

NEMA 17, 113 oz-in holding torque

OMHT23-393

Consultar Ventas

Disponible en:

NEMA 23, 76.6 oz-in holding torque

OMHT23-593

MXN2,815.00

Disponible en: 4 Semanas

NEMA 23, 79.3 oz-in holding torque

OMHT24-100

MXN3,160.00

Disponible en: 4 Semanas

NEMA 24, 123 oz-in holding torque

OMHT23-397

Consultar Ventas

Disponible en:

NEMA 23, 177 oz-in holding torque

OMHT23-597

MXN3,135.00

Disponible en: 10 Semanas

NEMA 23, 177 oz-in holding torque

OMHT23-400

Consultar Ventas

Disponible en:

NEMA 23, 264 oz-in holding torque

OMHT23-600

MXN4,615.00

Disponible en: 4 Semanas

NEMA 23, 264.8 oz-in holding torque

Double Shaft Motors (required for encoder mounting)

OMHT17-075-D

MXN3,495.00

Disponible en: 16 Semanas

NEMA 17, 62.8 oz-in holding torque, double shaft

OMHT17-275-D

MXN2,610.00

Disponible en: 4 Semanas

NEMA 17, 62.3 oz-in holding torque, double shaft

OMHT23-393-D

Consultar Ventas

Disponible en:

NEMA 23, 76.6 oz-in holding torque, double shaft

OMHT23-593-D

MXN3,040.00

Disponible en: 4 Semanas

NEMA 23, 79.3 oz-in holding torque, double shaft

OMHT24-100-D

MXN3,410.00

Disponible en: 4 Semanas

NEMA 24, 123 oz-in holding torque, double shaft

OMHT23-397-D

Consultar Ventas

Disponible en:

NEMA 23, 177 oz-in holding torque, double shaft

OMHT23-597-D

MXN3,055.00

Disponible en: Disponible

NEMA 23, 177 oz-in holding torque, double shaft

OMHT23-400-D

Consultar Ventas

Disponible en:

NEMA 23, 264 oz-in holding torque, double shaft

OMHT23-600-D

MXN4,825.00

Disponible en: 4 Semanas

NEMA 23, 264.8 oz-in holding torque, double shaft

Accessories

ENC-1000-175

Consultar Ventas

Disponible en:

Accessory daughterboard for Encoder inputs + RS485 comm

ENC-1000i

Consultar Ventas

Disponible en:

Differential encoder for NEMA 11/14/17 motors, 1000-line, with index pulse

ENC-1000i-23

Consultar Ventas

Disponible en:

Differential encoder for NEMA 23/24 motors, 1000-line, with index pulse

ENC-CA-4217-6FT

Consultar Ventas

Disponible en:

Encoder cable, 2 m (6')

ENC-CA-4217-10FT

Consultar Ventas

Disponible en:

Encoder cable, 3 m (10')

ENC-CA-4217-20FT

Consultar Ventas

Disponible en:

Encoder cable, 6 m (20')

MMI-01

Consultar Ventas

Disponible en:

Operator Interface

HUB 444 DIN RAIL

Consultar Ventas

Disponible en:

Multi-axis network hub with DIN rail mounting kit

OM-CONV-USB

MXN670.00

Disponible en: Disponible

USB to RS232 Interface Converter; USB-A to DB9-male

OM-PL-USBS

MXN2,050.00

Disponible en: Disponible

USB to RS232 converter; works with Windows Vista and Windows 7.

OMPS150A24

Consultar Ventas

Disponible en:

Stepper drive power supply, 24 VDC, 6.3A

Power Cord-SE

MXN349.00

Disponible en: 4 Semanas

AC Power cord with stripped end termination

SI-PROG-CBL

MXN865.00

Disponible en: Disponible

Replacement programming cable (comes with drive)

DRIVE-CBL

Consultar Ventas

Disponible en:

Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)

DSUB-9-MF

Consultar Ventas

Disponible en:

DIN rail interface module, 9-pin

DSUB-25-MF

Consultar Ventas

Disponible en:

DIN rail interface module, 25-pin

DSUB-9-MF-CBL

MXN1,330.00

Disponible en: Disponible

DSUB cable, 9-pin, 2 m (6.6'), male/female connectors

DSUB-25-MF-CBL

MXN990.00

Disponible en: 6 Semanas

DSUB cable, 25-pin, 2 m (6.6'), male/female connectors

Todas las cantidades que se muestran en MXN
Nota: Programming cable included. Software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
Ejemplo de pedido: (1) 3540I Programmable step motor indexer/drive, MXN18,995.00 plus (1) OM-CONV-USB USB to RS-232 Interface Converter, MXN670.00 plus (1) OMHT17-075 NEMA 17 stepper motor, 62.8oz-in holding torque, MXN3,245.00 , MXN18,995.00 + 670.00 + 3,245.00 = MXN22,910.00

Manuales de Productos:

Descarga 3540i Series - Programmable Step Motor Driver

Descarga STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives

Productos Relacionados: