Adjustable Depth Armored Thermocouples

ADR and ADF

Armored Thermocouples

^MXN1,810.00 ADR-E-G-1-24-1

HACER PEDIDO

Locking Fitting Freely Adjustable Over Flexible Armor
Spring-Action Catch Holds Probe Firmly in Place
TYPE ADF Fixed Locking Cap Becomes a Permanent Part of Your Installation
TYPE ADR Removable Locking Cap Bayonet Fitting Connects with a Twist

Termopares - Ver Productos Relacionados

Descripción

This unique thermocouple is easy to adjust to ANY immersion depth into thermowells (but NOTE: this probe cannot be immersed in liquids). Adjustable depth eliminates the need to stock a variety of fixed depth immersion probes. The locking cap can be positioned anywhere along the flexible armor and obtains its locking force from a unique spring- action catch. The welded stainless steel tipped probe is held against the bottom of the well by compression of the armor.

Two styles are available. Style ADF has a unique locking fitting that mounts permanently to your equipment. The quick release action of the locking fitting allows fast installation and removal of the probe.

Style ADR has a removable locking fitting and requires a BTA adapter. This style is ideal for installations where the mounting surface is under a layer of insulation, or where the locking cap must be removable.

Detailed Dimensions for ADR, ADF, and Termination Styles

Detailed Dimensions for ADR, ADF, and Termination Styles

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

ADF-T-U-2-48-3

Consultar Ventas

Disponible en:

Removable Locking Cap Probe, Type T, ungrounded junction, A dimension 2", B dimension 48", Female Quick Disconnect Termination

ADR-E-G-1-24-1

MXN1,810.00

Disponible en: 3 Semanas

Removable Locking Cap Probe, Type E, grounded junction, A dimension 1", B dimension 24", Spade Lugs Termination

ADR-K-U-2-48-1

MXN1,865.00

Disponible en: 3 Semanas

Removable Locking Cap Probe, Type K, ungrounded junction, A dimension 2", B dimension 48", Spade Lugs Termination

ADR-J-G-1/2-30-2

Consultar Ventas

Disponible en:

Removable Locking Cap Probe, Type J, grounded junction, A dimension 1/2", B dimension 30", Male Quick Disconnect Termination

Accessories

ADF-LF

MXN585.00

Disponible en: Disponible

Locking Fitting

Ordenar Por Número de Parte

Número de parte

Cant.

Número de parte

Cant.

Todas las cantidades que se muestran en MXN
Nota: Click here for help in selecting the thermocouple junction.

Generador de Número de Parte

Construya su Número de Parte Abajo

(1)		(2)		(3)		(4)		(5)		(6)
	-		-		-		-		-

Opciónes de Descripción:

(1) Style seleccionar de:
ADR para style ADR
ADF para style ADF

(2) Calibration seleccionar de:
J para J type
K para K type
T para T type
E para E type

(3) Junction(see notes section above help selecting the junction) seleccionar de:
G para Grounded
U para Ungrounded

(4) A dimension seleccionar de:
1/2 para 1/2 in.
1 para 1 in.
2 para 2 in.
3 para 3 in.

(5) B dimension seleccionar de:
24 para 24 in.
30 para 30 in.
36 para 36 in.
48 para 48 in.

(6) Termination Styles seleccionar de:
1 para Spade Lugs
2 para Male Quick Disconnect Type OST
3 para Female Quick Disconnect Type OST

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos