Lightweight Oil Immersion Heater with Thermostat—1" NPT Steel Fitting

ARTMO Series

Screw Plug Oil Immersion Heater

^MXN15,230.00 ARTMO-500/120V

HACER PEDIDO

Built in Thermostat— Three Temperature Ranges Available
0.25 to 0.50 kW
120 and 240 V, 1 Phase
0.315" Diameter Heavy Duty Steel Sheath
Lower Watt Density for Heating Light Weight Oils
Single Heating Element Design

Calentadores de inmersión - Ver Productos Relacionados

Descripción

Heating low viscosity oil — For better flow, improved characteristics, and maintenance of bulk oil at predetermined temperature levels. Also suitable for hydrocarbon based coolants and heat transfer oils where adequate flow conditions are maintained.

Features rugged construction — Sturdy heating steel screw plugs provide superior rigidity and strength. Heavy duty jumper straps and terminal posts assure permanent tightness of connection’s carrying capacity.

High conductivity elements — Filled with highest purity blends of magnesium oxide refractory (MgO) compacted to a rock hard density to insure maximum thermal conductivity, maximum electrical resistance, and assure long element life.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

General Purpose Enclosure

ARTMO-250/120V

MXN12,680.00

Disponible en: 4 Semanas

Temp.Range (60-187°F), .250 kW, 20 W/in2, 120 V

ARTMO-375/120V

MXN12,680.00

Disponible en: 4 Semanas

Temp.Range (60-187°F), .375 kW, 20 W/in2, 120 V

ARTMO-500/120V

MXN15,230.00

Disponible en: 4 Semanas

Temp.Range (60-187°F), .500 kW, 20 W/in2, 120 V

ARTMO-500/240V

MXN12,870.00

Disponible en: 5 Semanas

Temp.Range (60-187°F), .500 kW, 20 W/in2, 240 V

E2 Moisture Resistant/Explosion Resistant Enclosure

ARTMO-250E2TL/120V

MXN22,285.00

Disponible en: 5 Semanas

Temp.Range (0 to 127°F), .250 kW, 20 W/in2, 120 V

ARTMO-250E2/120V

MXN22,285.00

Disponible en: 4 Semanas

Temp.Range (60-187°F), .250 kW, 20 W/in2, 120 V

ARTMO-375E2TL/120V

MXN23,055.00

Disponible en: 5 Semanas

Temp.Range (0-127°F), .375 kW, 20 W/in2, 120 V

Todas las cantidades que se muestran en MXN
Nota: 1Heaters with General Purpose Enclosures are UL Listed and CSA certified.

2Heaters with Moisture Resistant/Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
Ejemplo de pedido: (1) ARTMO-250E2/120V Temp.Range (60-187°F), .250 kW, 20 W/in2, 120 V, MXN22,285.00

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)	(2)		(3)
ARTMO-			/

Opciónes de Descripción:

(1) Killowatt Rating seleccionar de:
250 para .250 kW
375 para .375 kW
500 para .500 kW

(2) Temperature Range seleccionar de:
Nada (dejar el campo en blanco) para (60-187°F)
TH para (60-240°F)
TL para (0--127°F)

(3) Voltage Rating seleccionar de:
120V para 120 Volts
240V para 240 Volts

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos