The AVK Series Feed Through Terminal Blocks offer savings in cost,
space and time. These terminal blocks mount on standard 35 x 15mm and
35 x 7.5 mm DIN rails and are design to meet world wide standards.
The AVK terminal blocks come in all wire ranges and no pre-treatment
of the wire is necessary, even for stranded wire. A full line of
accessories are available including end plates, end brackets,
cross connectors for bridging and marking tags.
The AVK terminal block plastic housing is made from polyamide 6.6 thermoplastic
resin with a UL 94 V2 rating for 105°C. This assures ample dielectric
strength for any industrial application. The screws and clamps are
made of steel with zinc plating, and together they generate a high
locking action and provides an excellent vibration and corrosion
resistant connection.
The AVK series ground terminal blocks meet the strict requirements
for low contact resistance, corrosion-free connection points, secured
screws, green and yellow color coding and clear circuit identification.
Since these terminal blocks are properly insulated, they can be positioned
next to current carrying terminals. The grounding terminal blocks are
structurally designed to mechanically and electrically connect to
mounting rails, when DIN rails are mounted to the metal cabinet or
sub-panels and properly connected to ground, the proper grounding
process is complete.
ELECTRICAL RATINGS
AVK-2.5
AVK-4
AVK-6
AVK-10
AVK-16
AVK-35
AVK-70
Voltage/Current
750V/26 A
750V/34 A
750V/44 A
750V/61 A
750V/82 A
750V/135 A
750V/192 A
VDE (IEC 60947-7-1)
750V/24 A
750V/32 A
630V/41 A
630V/57 A
750V/76 A
750V/125 A
UL/CSA
600V/20 A
600V/30 A
600V/50 A
600V/65 A
600V/85 A
600V/115 A
600V/175 A
ATEX
630V/21 A
400V/28 A
630V/36 A
500V/50 A
630V/66 A
630V/109 A
1000V/167 A
Insulation Strip Length
10 mm
10 mm
12 mm
12 mm
16 mm
18 mm
20 mm
AWG
26-12
26-10
26-8
16-6
12-4
8-1
6-2/0
Installed Dimensions
Width
5 mm
6 mm
8 mm
10 mm
12 mm
16 mm
22 mm
Length
44 mm
44 mm
44 mm
44 mm
50 mm
50 mm
74 mm
Height
44.5 mm
44.5 mm
44.5 mm
44.5 mm
55.5 mm
55.5 mm
67.5 mm
End Plate- Partition
AVK-EP-210
AVK-EP-210
AVK-EP-210
AVK-EP-210
AVK-EP-16
Included
Included
Cross- Connectors/2
OM-474122
OM-474132
OM-474142
OM-474152
OM-474162
OM-474172
–
Cross- Connectors/3
OM-474123
OM-474133
OM-474143
OM-474153
OM-474163
OM-474173
–
Cross- Connectors/4
OM-474124
OM-474134
OM-474144
OM-474154
OM-474164
OM-474174
–
Cross- Connectors/10
OM-474129
OM-474139
OM-474149
OM-474159
OM-474169
OM-474179
–
GROUNDING TERMINAL BLOCKS
AVK-2.5/4T
AVK-6/10T
AVK-16/35T
Insulation Strip Length
10 mm
12 mm
18 mm
AWG
26-10
16-8
40088
Installed Dimensions
Width
6 mm
10 mm
16 mm
Length
42 mm
42 mm
50 mm
Height
44.5 mm
44.5 mm
55.5 mm
End Plate- Partition
Included
Included
Included
…….
Todas las cantidades que se muestran en MXN Nota: Standard color is grey, red and blue are also stocked items. To order colored terminal blocks add suffix “-R” for red, “-B” for blue, “-Y” for yellow, “-G” for green and “-BE” for beige, no additional cost. Ejemplo de pedido: (1) AVK-2.5 Feed through terminal block 600V, 20 A for 26-12 AWG, MXN31.00 plus (1) AVK-6/10T Grounding terminal block for 16-8 AWG, MXN145.00 plus (1) AVK-EP-210 End plate for AVK-2.5 to AVK-10 terminals, MXN31.00 plus (1) MKR-1-50 one card of marking tags numbered 1 to 50, MXN154.00 plus (1) T-BLK-EB End bracket, MXN35.00, MXN31.00 + 145.00 + 31.00 + 154.00 + 35.00 = MXN396.00
Generador de Número de Parte
Construya su Número de Parte Abajo
Opciónes de Descripción:
(1)
Amps and Width seleccionar de: 2.5 para 20 A 5mm wide 4 para 30 A 6mm wide 6 para 50 A 8mm wide 10 para 65 A 10mm wide 16 para 85 A 12mm wide 35 para 115 A 16mm wide 70 para 175 A 22mm wide
(2)
Color seleccionar de: Nada (dejar el campo en blanco) para for std. Gray -R para for Red -B para for Blue -Y para for Yellow -G para for Green -BE para for Biege
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos
