CN2516 Series
1/16 DIN Temperature/Process Limit Controllers
Ver Todas los Modelos Abajo
-
FM Approved
-
Dual Display
-
Universal Input
-
High/Low Limit
-
Limit Relay Output (Fixed)
-
Additional Modular Outputs (Optional)
-
RS485 (Optional)
-
Remote Reset Digital Input (Optional)
Descripción
This product series is no longer available. For potential replacements please see
CNI_SERIES or
CN400 or
CN4000_SERIES
Please consult an application engineer for a more specific recommendation.
The CN2516 Series is part of
a range of new generation of
limit controllers that incorporate
numerous product specification,
communication, display interface
and software improvements that
surpass competitive limit device
offerings in ease of use and
programming. By adding more
versatile features and user-friendly
functionality like digital inputs, an
easy-to-use HMI, jumperless and
auto-hardware configuration,
24 Vdc transmitter power
supply and MODBUS®
communicationacross the
range, the CN2516 limit
controllertransform the
complicated into the simple
while saving you time (as much
as 50% on product set-up),
reducing inventory stock and
virtually eliminating the likelihood
of operator errors. The CN2516
limit controllers are affordable,
well-featured, easy to use and
adaptable with performance
features that work for you to make
limit control simple. The CN2516
is a fail-safe protection device to
prevent damage toequipment or
products. It will shut down process
when a preset temperature is
reached and cannot be reset by
the operator until the process has
returned to a safe condition.
Specifications Environmental Characteristics
Operating Temp: 0° to 55°C (32° to 131°F)
Storage Temp: -20° to 80°C (-4° to 176°F)
Humidity: 20 to 95% non-condensing RH Electrical
Supply Voltage: 100 to 240 V, 50/60 Hz, optional 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
Power Consumption: 5 W/7.5 VA maximum Inputs
Thermocouples: J, T, K, L, N, B, R, S, C; Pt Rh 20% vs. Pt 40% Rh
RTD: 3-wire, PT100 DC linear (scalable -1999 to +9999)
Volts: 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V
DC Milliamps: 0 to 20 mA or 4 to 20 mA
DC Millivolts: 0 to 50mV, 10 to 50mV Outputs
Output 1: (Limit relay) fixed; outputs
Output 2 and 3: (Alarm relay) are user-selectable and customized based on desired application; choose from the following output types
Maximum # of Outputs: 3 for alarm, 24 Vdc transmitter power supply or retransmit of process value/limit trip setpoint
Limit Relay: SPDT; 240 Vac 5 A resistive; lifetime >100,000 operations at rated voltage/current
Alarm Relay: Optional SPDT; 240 Vac 2 A resistive; lifetime >500,000 operations at rated voltage/current
SSR Drive:
Optional Drive Capability: >10 Vdc nominal into 500 Ω minimum
DC Linear: Optional 0 to 20 mA, 4 to 20 mA into 500 Ω max; 0 to 10V, 1 to 5V, 2 to 10V, 0 to 5V into 500 Ω min; outputs have 2% over/under drive applied; accuracy ±0.25% (mA into 250 Ω load, V into 2k Ω load); degrading linearity to ±0.5% for increasing burden to specified limits
Triac: Optional 0.01 to 1 A AC, 20 to 280 Vrms, 47 to 63 Hz (limit 2)
Transmitter Power Supply: Optional 24 Vdc (limit 1)
Output Functions
Process Alarm: (Reverse or direct) modes (alarm 1 and 2): high/low, band, deviation, logical OR/AND
Retransmit: Process value or limit setpoint
Electrical Performance
Accuracy: ± 0.1% of input range ±1 LSD (thermocouple CJC better than 1°C)
Input Sample Rate: 4 per second, 14-bit resolution
Impedance: >10M Ω for the thermocouple and mV ranges, 47 kΩ for V ranges and 5 Ω for mA ranges
Sensor Break Detection: <2 seconds (except zero based DC ranges), limit output opens, low alarms activate for RTD, mA or V ranges
Communications Interface
User-Selectable: 2-wire, RS485 serial communications option with choice of MODBUS RTU or ASCII protocol; 1200 to 19200 baud
PC Configuration: Offline configuration from serial port to dedicated configuration socket (comms option not required)
Protection IEC IP66 (NEMA 4X) front panel IEC IP20 (behind the panel protection)
Dimensions
Panel Cutout: 45 x 45 mm (1.77 x 1.77")
Height: 48 mm (1.89")
Width: (48 mm (1.89")
Depth: 110 mm (4.33")
Weight: 0.21 kg (0.46 lb)
Mounting: Plug in panel with fixing strap
Manuales de Productos:
Descarga
CN2504-CN2508-CN2516 - Limit Controllers
Descarga
CN2516-CN2508-CN2504 - Temperature Controllers
