Process Controllers

CN8590 Series

Ver Todas los Modelos Abajo

HACER PEDIDO

User-Selectable Universal Inputs: Thermocouple, RTD, Voltage, or Current
Autotune PID, Heat or Cool
Bumpless Auto/Manual Transfer
Configurable Dual Heat or Cool Outputs
Relay, DC Pulse, or Triac Output Options
Programmable Process and Deviation Alarms (Normal and Latching)
Alarm Inhibit Mode
NEMA 4X (IP65) Dust- and Splash-Proof Front Panel
Accuracy: ±0.2% of FS, ±1 Digit

Controladores de temperatura y proceso y dispositivos de conmutación de potencia - Ver Productos Relacionados

Descripción

The CN8590 is a 1/32 DIN microprocessor based controller that provides accurate closed-loop control of temperature and other process variables. With on-demand auto-tuning, and complete On/Off through full PID functionality, the CN8590 accepts inputs from K, J and T type thermocouples, RTD's or linear signals. Standard features include a large easy-to-read LED display, dual outputs, field selectable inputs, process or deviation high/low alarms, and bumpless auto/manual transfer. On/Off output hysteresis is adjustable and the unit may be easily configured in the field to display process value, deviation or output percentage.

SPECIFICATIONS
Performance
Accuracy: ±0.2% of FS, ±1 Digit
Display Resolution Selectable: 0.1, 0.01 for process inputs, 1.0 for thermocouple inputs, 0.1, 1.0 for RTD inputs.
Setpoint Resolution: 1 count/0.1 count
Repeatability: ±1.0 count
Temperature Stability: 5 .V/°C maximum
T/C Cold End Tracking: 0.05°C/°C ambient
Noise Rejection: Common mode >100 dB, Series mode >70 dB
Sampling Frequency: 3.7 Hz (270 ms) Operating Limits
Line Voltage Line Power: 85 to 265 Volts, 50/60 Hz,
Power Consumption: Less than 6 VA (Instrument)

Control Characteristics
Setpoint Limits: User Configurable
Alarms: Adjustable for high low process or deviation
Rate (Derivative): 0 to 2400 sec
Reset (Integral): 0 to 9600 sec
Cycle Time: 0.3 to 120 sec
Proportional Band: 1 to FS
Deadband: 1 to FS
Control Hysteresis: 1 to FS
Autotune: Operator-initiated from front panel
Manual Control: Operator-initiated from front panel

Inputs
Thermocouple: J, K and T, maximum lead resistance 100 ohms
RTD: Platinum 100 ohm at 0 Degrees C, DIN curve 0.00385.
Process Inputs: Linear current and voltage
Engineering Units: -1999 to 9999

Output Options
SPST Relay: 5 Amps @ 120 Vac , 5 Amps @ 240 Vac
dc Pulse: 5 Vdc pulsed
SSR: Solid-State Relay, 120/240 Vac, zero Voltage switched 1 Amp continuous 10 Amp surge @ 25°C.

General
Display: LED 4-Digit, 10 mm
Display Indicators: 7-Segment LED Alphanumeric
Dimensions: 48 mm (1.890") x 23.97 mm , (0.944") x 99.99 mm (3.937")
Panel Cutout: 45 mm (1.772") x 22.19 mm (0.874")
Front Panel Rating: NEMA 4X
Operating Temperature: 0 to 55°C (32 to 131°F)
Humidity Tolerances: 90% R.H. maximum, non-condensing
Weight: 90.7 g (3.2 oz)

Panel Mount Components

Panel Mounting and Controller

Universal Input Types and Ranges

Input	Type	Range	Resolution
TC	J Iron-Constantan	-100 to 760°C -148 to 1400°F	1°C 1°F
	K CHROMEGA™-ALOMEGA™	-140 to 1350°C -220 to 2462°F	1°C 1°F
	T Copper-Constantan	-130 to 400°C -202 to 752°F	1°C 1°F
RTD	RTD 2-wire, 100Ω Pt	-200 to 850°C -328 to 1562°F	1°C 1°F
RTD	RTD 2-wire, 100Ω Pt	-128.8 to 200.0°C -199.0 to 392.0°F	0.1°C 0.1°F
MV	10 to 50 mV 0 to 50 mV	Scalable (-1999 to +9999) Scalable (-1999 to +9999)	Selectable Selectable
*MA	4 to 20 mA 0 to 20 mA	Scalable (-1999 to +9999) Scalable (-1999 to +9999)	Selectable Selectable

* Note for mA Input, connect external 2.5 ohm resistor across signal input terminals.

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

CN8592-R1-DC2

MXN12,235.00

Disponible en: Disponible

1/32 DIN controller with one relay, one dc pulse output and 85 to 265 Vac power

CN8592-R1-T2

MXN12,235.00

Disponible en: Disponible

1/32 DIN controller with one relay, one ac SSR output and 85 to 265 Vac power

CN8592-DC1-T2

MXN12,235.00

Disponible en: 5 Semanas

1/32 DIN controller with one dc pulse, one ac SSR output and 85 to 265 Vac power

CN8592-T1-DC2

MXN12,235.00

Disponible en: 5 Semanas

1/32 DIN controller with ac SSR, one dc pulse output and 85 to 265 Vac power

CN8592-T1-T2

MXN12,235.00

Disponible en: 5 Semanas

1/32 DIN controller with dual ac SSR outputs and 85 to 265 Vac power

CN8592-DC1-DC2-12LV

Consultar Ventas

Disponible en:

1/32 Din controller dual output DC pulse/DC pulse

Todas las cantidades que se muestran en MXN