En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

 - Discontinued Cement-On Surface Thermocouples

CO4-K Series

Cement-On Surface Thermocouples | CO4-K Series

Cement-On Surface Thermocouples

MXN3,355.00 CO4-K-40

1 año de garantía
  • Ultra-Fast Response Time < 10 milliseconds
  • Made from 0.002" Foil and 0.010" Diameter Thermocouple Wire
  • Very Low Thermal Inertia
  • Ideal for Surface Temperature Measurement
  • Lead Length Options for Style 4: 1 m (40"), 2 m (80"), or 3 m (120") Long. Additional Lengths are Available Upon Request
  • Made From ± 0.05 mm (0.002") Foil
Termopares - Ver Productos Relacionados

Descripción

This product is discontinued.


Omega introduces its cement-on, ultra-fast response thermocouples for fast surface temperature measurement applications, CO4. This Style is made from 0.002" thermocouple alloy foil, a special process where the butt-welded thermocouple junction is 0.002" in thickness. CO4 is flat, extremely low inertia construction and is an ideal means of measuring the temperature of both flat and curved metals, and plastic and ceramic surfaces where the very fast response is desired.

Omega's cement-on CO4 thermocouples are fabricated from ANSI "Special Limits of Error" grade thermocouple materials in "K" calibrations and yield accurate temperature indication when used with standard thermocouple instrumentation. CO4 has the fastest response due to a 32-gauge thermocouple wire.

 
Cement-on “CO4” thermocouples are the easiest to install. The foil sensor is embedded between two paper-thin Kapton high-temperature polymer laminates, which both support and electrically insulate the foil section as well as provide a flat surface for cementing. The polymer/glass laminate, in general, determines the maximum temperature of the construction which is 260°C (500°F) continuous and up to 370°C (698°F) for short duration. The CO4 comes in a 1 m (40"), 2 m (80"), or 3 m (120") PTFE insulated 32-gauge thermocouple wire which is bonded to the foil and strain relieved by the laminate. An application instruction sheet accompanies each package.


 

Model No. Style Thermocouple Type Length
mm (inches)
Maximum Temperature °C* (°F)
Continuous 600 hr. 10 hr.
CO4-K-40

4

K CHR-ALOMEGA 1 m (40") 260°C (500°F) 315 °C(600°F) 370°C (700°F)
CO4-K-80 K CHR-ALOMEGA 2 m (80") 260°C (500°F) 315 °C(600°F) 370°C (700°F)
CO4-K-120 K CHR-ALOMEGA 3 m (120") 260°C (500°F) 315 °C(600°F) 370°C (700°F)

 

 





View the Thermocouple Accuracy and Color Code charts

Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
STYLE 4
CO4-K-40
Consultar Ventas  
Disponible en: 
 
 
 - Discontinued Type K (CHROMEGA™-ALOMEGA™), 40", cement on Thermocouple
CO4-K-80
Consultar Ventas  
Disponible en: 
 
 
Type K (CHROMEGA™-ALOMEGA™), 80" lead, cement on Thermocouple
CO4-K-120
Consultar Ventas  
Disponible en: 
 
 
Type K (CHROMEGA™-ALOMEGA™), 120" lead, cement on Thermocouple
Todas las cantidades que se muestran en MXN
Nota: Response time when "grounded" or "cemented" to surface: Style 4 — < 10 milliseconds,
The response time or "time constant" is the time required to reach 63.2% of an instantaneous temperature change.
Additional length wire can be ordered for Styles 4
The temperature range high limits given are greatly influenced by environmental conditions, installation method, accuracy and lifetime requirements and may vary from the general guidelines listed in the table.
Style 4 cannot be used with CC High-Temperature Cement; CC Cement will break down insulation.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ejemplo de pedido: (1) CO4-K-40 Type K (CHROMEGA™-ALOMEGA™) 1 m (40''), cement-on thermocouple., MXN3,355.00
We noticed you are from the US. Visit your local site for regional offers and live support.