Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Fuera de México:+52 (81) 8335-3774

Strain Amplifier/Signal Conditioners Modules for Strain Gages, Load Cells and Transducers

DMD-465

Strain Amplifier/Signal Conditioners Modules for Strain Gages, Load Cells and Transducers | DMD-465

MXN14,540.00 DMD-465

5 años de garantía
  • Bridge Excitation 4 to 15 Vdc up to 120 mA
  • Works with Bridge Circuits of 120 Ohms or Higher
  • Adjustable Gain and Offset
  • 6-Wire Bridge Connections
  • Voltage and Current Output Versions
  • 115, 230 Vac and dc Powered Models
Accesorios - Ver Productos Relacionados

Descripción

The DMD-460 Series bridge amplifiers are self contained, ac or dc powered signal conditioning modules for strain gages, load cells and bridge-type sensors. The DMD 465 contains a precision differential instrumentation amplifier with voltage output. The DMD 465WB is similar, but has a frequency response to 2 kHz. The DMD 466 is similar to the above units, but with a 4 to 20 mA output instead of a voltage output.

SPECIFICATIONS
Common
Power: Standard 115 Vac or optional 220 Vac ±10% 50/60 Hz or 10 to 36 Vdc 0.7 A @ 10V, 0.17 A @ 36V at maximum excitation load
Operating Temperature: 0 to 70°C (32 to 158°F)
Storage Temperature: -25 to 85°C (-13 to 185°F)
Weight: 510 g (18 oz)
Size: 96 L x 51 W x 73 mm H (3.75 x 2 x 2.87")

Bridge Supply
Excitation Voltage Range: 4 to 15 Vdc
Current Output: 120 mA max
Line and Load Regulation: (0 to 100 mA) 0.05% max
Output Noise: 0.5 mVrms

Voltage Output, DMD-465 and DMD-465WB
Gain Range: 40 to 250 (up to 1000 with external resistor on DMD-465 only)
Dynamic Response:
   DMD-465: DC to -3 dB = 3 Hz
   DMD-465WB: DC to -3 dB = 2 kHz
Max Output (2 kΩ Load): ±10 Vdc
Output Impedance: 0.01 to 1 Ω
Output Offset: -5 to 2V (DMD-465WB only)
Gain Temp Coefficient: 200 ppm/°C
Input Bias Current: 30 nA
Input Impedance: 3000 MΩ
Output Noise (RTO): @ gain = 100
   DMD-465: 120 µVrms
   DMD-465WB: 1 Hz to 2 kHz = 2 mV
Input Noise Line Frequency: 15 µV p-p
Common-Mode Rejection: 90 dB @ gain 40, 100 dB @ gain 250
Common-Mode Input Voltage: ±15V

4 to 20 mA Transmitter DMD-466
Output: 4 to 20 mA, 0 to 20 mA
Input Range for 20 mA Output: 10 mV min, 50 mV max
Zero Adjust: 0 to ±12 mA
Linearity: ±0.05% FS
Temperature Stability: 200 ppm/°C
Input Impedance: 1000 MΩ
Common-Mode Rejection: 90 dB
Common-Mode Input Voltage: ±15V
Compliance Voltage: 10 Vdc
Output Noise: 1 µA rms @ gain 0.2 mA/mV, 1 to 100 Hz
Dynamic Response: DC to -3 dB = 3 Hz
Response Time:
   200 ms: to 99% of final value, typical
   300 ms: to 99.9% of final value, typical
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDMD-465
DMD-465
MXN14,540.00
Disponible en: 4 Semanas
 
Strain gage amplifier with voltage output and 110 Vac power
Quick Ship
  
DMD-465-220V
Consultar Ventas  
Disponible en: 
 
 
Strain gage amplifier with voltage output and 220 Vac power
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDMD-465WB
DMD-465WB
MXN14,540.00
Disponible en: Disponible
 
High frequency strain gage amplifier with voltage output and 110 Vac power
Quick Ship
  
DMD-465WB-220V
Consultar Ventas  
Disponible en: 
 
 
High frequency strain gage amplifier with voltage output and 220 Vac power
Quick Ship
  
DMD-466
MXN14,540.00
Disponible en: Disponible
 
Strain gage amplifier with 4-20 mA output and 110 Vac power
Quick Ship
  
DMD-466-220V
Consultar Ventas  
Disponible en: 
 
 
Strain gage amplifier with 4-20 mA output and 220 Vac power
Quick Ship
  
DMD-466-DC
MXN16,415.00
Disponible en: Disponible
 
Strain gage amplifier with 4-20 mA output and 10-36 Vdc power
Accessories
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDIN400
DIN400
MXN1,095.00
Disponible en: 6 Semanas
 
DIN Rail Mounting Kit
Quick Ship
  
POWER CORD-SE
MXN236.00
Disponible en: Disponible
 
AC Power cord with stripped end termination
Todas las cantidades que se muestran en MXN
Ejemplo de pedido: (1) DMD-465WB is a wide bandwidth amplifier/signal conditioner module, with 115 Vac power., MXN14,540.00

Manuales de Productos:

Descarga DMD-465 - Bridge Sensor AC Powered Signal Conditioner
Descarga DMD-465WB - Bridge Sensor AC Powered Signal Conditioner
Descarga DMD-466 Bridge Sensor - AC Powered Signal Conditioner
We noticed you are from the US. Visit your local site for regional offers and live support.