In-Line Amplifiers for Pressure Transducers and Load Cells

DMD Series

^MXN9,570.00 DMD-19V

HACER PEDIDO

NEMA-4, NEMA-12 or Lightning Protected Junction Box Enclosures Available
Rugged Design for Industrial Applications
Models with 0-5 Vdc, Triple Range 0-5 Vdc, or 4-20 mA Outputs

Accesorios - Ver Productos Relacionados

Descripción

The DMD Series In-Line Amplifiers convert a mV/V transducer into either a 0-5 Vdc or 4-20 mA output device. They are intended for applications where physical conditions will not allow the amplifier to be integral with the transducer body and must be ordered with a transducer as they are calibrated with that transducer to effect their output over the range of the transducer. The 4-20 mA output amplifiers require a bridge resistance of at least 5000 Ohms.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

DMD-19V

MXN9,570.00

Disponible en: 6 Semanas

In-line amplifier with 0-5 volt output and NEMA-4 enclosure

DMD-17V

MXN9,570.00

Disponible en: 6 Semanas

In-line amplifier with 0-5 volt output and NEMA-12 enclosure

DMD-19V3

Consultar Ventas

Disponible en:

Triple range amplifier with 0-5 volt output and NEMA-4 enclosure

DMD-19I

Consultar Ventas

Disponible en:

In-line amplifier with 4-20 mA output and NEMA-4 enclosure

DMD-17I

MXN9,570.00

Disponible en: 6 Semanas

In-line amplifier with 4-20 mA output and NEMA-12 enclosure

DMD-18I-JB

Consultar Ventas

Disponible en:

Lightning protected junction box with 4-20 mA output and 1/2-14 conduit fittings

Todas las cantidades que se muestran en MXN
Nota: 1) Mating connectors ordered separately, PT06F10-6S, $26.50 ea. 2) Current output models require bridge resistance >5000 Ohms
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ejemplo de pedido: (1) DMD-19V NEMA-4 style 0-5 Vdc output amplifier with Bendix connectors as the input and output, MXN9,570.00 plus (2) PT06F10-6S Mating input and output connectors, MXN1,215.000, MXN9,570.00 + 1,215.00 X 2 = MXN12,000.00