Strain and Process Meter with Large, Selectable Color Display

DP25B-E and DP25B-S

Strain and Process Monitor / Controller / Instumentation

^MXN13,120.00 DP25B-E

HACER PEDIDO

Big Bright LED Display
Scaling in Wide Range of Engineering Units
Built-In Excitation
Analog Output Optional
Dual Relays Optional
Tare Button
Peak Memory

Instrumentación para la medición de presión y tensión - Ver Productos Relacionados

Descripción

The OMEGA DP25B series Digital Panel Meters feature the biggest brightest display of any 1/8 DIN panel meter. The user can select the display color: RED ,AMBER, or GREEN.
PANEL METERS with Relays and Analog Output
The popular DP25B series are accurate, economical, and easy to program. The DP25B series feature a big bright four digit display plus optional dual 5 amp Form C (SPDT) relays and a choice of isolated or non-isolated analog output. The scalable 0-10 Vdc, 0-20mA, or 4-20 mA analog output can be used as a retransmission of the display value or as a proportional control output as required. The microprocessor based DP25B series includes instruments for Thermocouple, Process (DC voltage and current), and Strain Gage.

The DP25B process meter accepts a wide variety of DC voltage and current inputs to cover any typical process application. Standard features include easy front panel scaling to virtually any engineering units, selectable excitation of four voltages to work with most transducers and transmitters, front panel and remote tare function for weighing applications, and a hardware lockout to prevent unauthorized changes in setup. Four full digits and simplified scaling via the front-panel pushbuttons make it easy to set the display to read in any engineering units.

SPECIFICATIONS
Input Ranges: 0-100 mV, ±50 mV, 0-10 V, ±5 V, 0-20 mA, 4-20 mA
Isolation: Dielectric strength to 2500V transient per 3mm spacing based on EN 61010 for 260 Vrms or DC working voltage
NMR: 60 dB
CMR: 120 dB
Input Protection: Voltage Input = 120 Vrms max; Current Input = 100 mA max
Input Impedance: 100 Meg ohms for 100 mV or ±50 mV input range; 1 Meg ohm for 10 V or ±5 V input range; 5 ohms for 20 mA current input range
Display: 4-digit, LED 9-segment, 21 mm (0.83"), (Red, Green, Amber)
Analog-to-digital technique: Dual slope
Internal resolution: 15 bits
Read rate: 3/sec
Polarity: Automatic
Max error process: ±0.03% of reading, ± 1 count
Span tempco: 50 ppm/°C
Step response: 1 sec
Warm-up to rated accuracy: 30 min
Load Regulation: 1.1%
Line Regulation: 0.02% per Vac
Analog output (optional): 0-10 V, 4-20 mA or 0-20 mA; may be assigned to a display range or to setpoint #1, when used as a proportional control output
Operating temperature: 0 to 50°C (32 to 122°F)
Storage temperature: -40 to 85°C (-40 to 184°F)
Relative humidity: 90% at 40°C (104°F) (non-condensing)
Panel cutout: 1/8 DIN, 45 x 92 mm (1.78" x 3.62")
Weight: 575 g (1.27 lb)
AC Power Unit:
Power: 115 Vac or 230 Vac ±10%; 50-60 Hz, 11.0 watts max.
Excitation: 24 V @ 25 mA or 12 V @ 50 mA or 10 V @ 120 mA or 5 V @ 60 mA
DC Power Unit:
Power: 12-32 Vdc; 8.0 watts max.
Excitation: 24 V @ 25 mA or 12 V, 10 V, 5 V @ 35 mA (For Low/Medium Brightness), For High Brightness use external excitation to power sensors

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

DP25B-E

MXN13,120.00

Disponible en: 6 Semanas

Basic Process Meter

DP25B-E-230

MXN13,855.00

Disponible en: Disponible

Process Meter, 230 Vac

DP25B-E-230-A

MXN17,915.00

Disponible en: Disponible

Process Meter, 230 Vac with Analog output

DP25B-E-230-AR

MXN21,740.00

Disponible en: 6 Semanas

Process Meter, 230 Vac with Analog and Relay output

DP25B-E-DC10/32

MXN17,865.00

Disponible en: 2 Semanas

Process Meter / Controller, 10-32 Vdc

DP25B-S

MXN13,120.00

Disponible en: 1 Semana

Basic Strain Meter

DP25B-S-230

MXN13,855.00

Disponible en: 6 Semanas

Strain Meter, 230 Vac

DP25B-S-230-A

MXN16,965.00

Disponible en: 6 Semanas

Strain Meter, 230 Vac with Analog output

DP25B-S-230-AR

MXN21,740.00

Disponible en: 6 Semanas

Strain Meter, 230 Vac with Analog and Relay output

DP25B-S-DC10/32

MXN17,865.00

Disponible en: 6 Semanas

Strain Meter / Controller, 10-32 Vdc

Todas las cantidades que se muestran en MXN
Nota: Power Options are not field installable. All units come complete with a operator’s manual.

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)	(2)	(3)
DP25B-

Opciónes de Descripción:

(1) TYPE seleccionar de:
E para Process voltage and current inputs
S para Strain gage bridge or process inputs

(2) Power Options seleccionar de:
para 115 Vac power leave blank
-230 para 230 Vac power
-DC10/32 para 10 to 32 Vdc power

(3) Output Options seleccionar de:
para no options leave blank
-A para scaleable analog output
-R para dual alarm relays
-AR para analog and relay options
-AI-R para isolated analog outputs and relay options

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos

Manuales de Productos:

Descarga DP25-E and DP25B-E - 1/8 DIN Process Panel Meter

Descarga DP25-E and DP25B-E - Quick Start Manual for DP25-E Process Meter