Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Fuera de México:+52 (81) 8335-3774

Low cost, 3-1/2 Digit Voltmeters, 1/8 DIN

DP301AN

Low cost, DC Voltmeter | DP301AN

Low cost, DC Voltmeter

Ver Todas los Modelos Abajo

1 año de garantía
  • ±1999 Count Display Span
  • ±200 mV to ±200 Vdc Ranges
  • True-Differential Input with 80 dB CMR
  • 3-Wire Ratio Input
  • Bright, 14 mm (0.56") LED Display
  • Automatic Zero and Polarity
  • Display Hold and Test
  • 115/230 Vac Power
  • 1/8 DIN Case

    Options
  • Isolated 9 to 32 Vdc Power
  • Isolated 26 to 56 Vdc Power
  • Screw-Terminal Barrier Strip
  • NEMA 4 (IP65) Splash-Proof Lens Cover
Instrumentos de medición y control de proceso - Ver Productos Relacionados

Descripción

The DP301AN is a low-cost 3-1/2 digit DC voltmeter. It fits in a standard 1/8 DIN panel cutout and require a depth of less than 104 mm (4.1") behind the panel. With the addition of a screw-terminal barrier strip, it becomes a low-cost, pin-compatible alternative to the DP2000A and DP2000B in applications where indication-only is required.

INPUT RANGES
The DP301AN offer voltage ranges of ±0.1999V, ±1.999V, ±19.99V and ±199.9 Vdc. The input is true-differential, with excellent common-mode noise rejection (CMR). By using an external DC voltage reference, any of these ranges can further be configured for 3-wire ratio measurement with readout from 0 to 1.999.

OPTIONS
The DP301AN can be configured for four voltage input ranges, three decimal-point positions, and high-impedance 3-wire ratio input. Mechanical options include a screw-terminal barrier strip for signal and power and a splash-proof lens cover which meets NEMA 4 (IP65) standards.

SPECIFICATIONS
Noise Rejection
NMR: 56 dB, 50/60 Hz
CMR, AC GND to SIG GND: 120 dB, DC to 60 Hz
CMR, SIG LO to SIG GND: 80 dB, DC to 60 Hz
CMV, AC GND to SIG GND: 1500 Vp per HV test, 354 Vp per IEC spacing
CMV, SIG LO to SIG GND: ±1 Vp
Power
AC Voltage: 115 or 230 Vac, ±15%
AC Frequency: 49 to 440 Hz
DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp
Power Consumption: 2.4 W (nominal)
Output Voltages: 4.7 Vdc and -4.6 Vdc ±5%, 10 mA max
Display
Type: 7-segment, red LED
Height: 14 mm (0.56")
Symbols: -1.8.8.8
Decimal Points: Three positions programmable internally or at connector
Overrange Indication: Three least-significant digits blank
Environmental
Operating Temperature: 0 to 60°C
Storage Temperature: - 40 to 85°C
Relative Humidity: 95% at 40°C (non-condensing)
Analog-To-Digital Conversion
Technique: Dual-slope, average-value
Polarity: Automatic
Signal integration period: 100 ms Signals
HOLD and TEST Inputs: TTL or 5V CMOS compatible
Mechanical
Bezel: 96 W x 48 H x 5.1 mm D (3.78 x 1.89 x 0.20")
Depth Behind Bezel: 104 mm (4.09")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 14 oz (400 g)
Case Material: 94V-0 UL-rated polycarbonate
Accuracy at 25°C
Maximum Error: ±0.05% of reading ±1 count
Span Tempco: ±0.01% of reading/°C
Step Response: 1 s
Warmup to Rated Accuracy: 10 min
Input Configuration
Configuration: Differential, bipolar
Zero: Automatic
Span Adjustment: ±5%
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
Quick Ship
DP301AN-2
Consultar Ventas  
Disponible en: 
 
 
3-1/2 digit voltmeter for new applications, ±199.9 mVdc
Quick Ship
DP301AN-3
Consultar Ventas  
Disponible en: 
 
 
3-1/2 digit voltmeter, ±1.999 Vdc input range,115 Vac, 50/60 Hz power
Quick Ship
DP301AN-4
Consultar Ventas  
Disponible en: 
 
 
3-1/2 digit voltmeter, ±19.99 Vdc input range,115 Vac, 50/60 Hz power
Quick Ship
DP301AN-4-D4
Consultar Ventas  
Disponible en: 
 
 
3-1/2 digit voltmeter, ±19.99 Vdc input range,115 Vac, 50/60 Hz power with D4 connector / screw terminal barrier strip.
Quick Ship
DP301AN-5
Consultar Ventas  
Disponible en: 
 
 
3-1/2 digit voltmeter, ±199.9 Vdc input range,115 Vac, 50/60 Hz power.
Quick Ship
DP301AN-5-D4
Consultar Ventas  
Disponible en: 
 
 
3-1/2 digit voltmeter, ±199.9 Vdc input range,115 Vac, 50/60 Hz power with D4 connector / screw terminal barrier strip.
Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo
Opciónes de Descripción:


(1) Model seleccionar de:
DP301AN para 3-1/2 digit voltmeter

(2) Input Range seleccionar de:
-2 para ±199.9 mVdc
-3 para ±1.999 Vdc
-4 para ±19.99 Vdc
-5 para ±199.9 Vdc

(3) 3-Wire Ratio Input Impedance (DC input) seleccionar de:
Nada (dejar el campo en blanco) para Standard
-HZ para High impedance (100 mOhm)

(4) decimal Point seleccionar de:
Nada (dejar el campo en blanco) para decimal point programmable at D1 connector
-DP1 para 1.999 internally-wired
-DP2 para 19.99 internally-wired
-DP3 para 199.9 internally-wired

(5) Power options seleccionar de:
Nada (dejar el campo en blanco) para 115 Vac 50/60 Hz power
-C1 para 230 Vac 50/60 Hz
-C3C para Isolated 9 to 32 Vdc
-C3E para Isolated 26 to 56 Vdc

(6) Add-On Option seleccionar de:
Nada (dejar el campo en blanco) para red LED display
-G para Green LED display

(7) Add-On Option seleccionar de:
Nada (dejar el campo en blanco) para no option
-D4 para Screw-terminal barrier strip for power and signal (removes power and signal from D1).
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos
We noticed you are from the US. Visit your local site for regional offers and live support.