Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Fuera de México:+52 (81) 8335-3774

High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available

DP7600

High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available | DP7600

MXN25,965.00 DP7600

1 año de garantía
  • 5-Digit Display
  • Dual Inputs Available
  • All Programming and Calibrating Via 5 Front Panel Switches
  • Programmable Digital Filter, 1 to 500 Hz Cutoff
  • 16-Bit A/D Converter (65000 Counts)
  • Tare (Zero) up to 50% of Span with Single Pushbutton
  • Peak Detect and Run Out Modes
  • 115/230 Vac Power, Field Selectable
Instrumentación para la medición de presión y tensión - Ver Productos Relacionados

Descripción

The DP7600 is a high speed load/strain meter. The unit performs 1000 conversions per second with limit checking and peak/runout tracking done at a user selectable rate (from 1 to 500 Hz). Peak and runout data can also be displayed using the front panel switches. A tare reading, up to 50% of span, can be entered with a single front panel push button.
The DP7700 is a high speed process/voltmeter with many of the same features. The DP7700 accepts most process inputs from 0-200 mV to 0-10 Vdc and 4-20 mA current loops. Transducer/loop power of ±15 Vdc @ 50 mA is standard.
Programming both meters is accomplished via five switches located on the front panel. The text at the top of the switch (NORMAL, PEAK, RUNOUT, TARE, ABS/REL) indicates its normal function. The text at the lower half of the switch (ENTER, UP, DOWN, NEXT, EXIT) indicates the switch’s function during setup and calibration.

SPECIFICATIONS
DP7600 Load/Strain Gage Meter

Excitation: +10 Vdc @ 50 mA, +5 Vdc @ 25 mA
Coarse Gain Setting: Selectable by switches on rear of unit Full Scale mV ranges: 5.1, 10.2, 15.3, 20.0, 26.3, 30.6, 35.1, 39.2
Bridge Resistance: 100 to 5000 Ohms. 4-wire or 6-wire configuration
DP7700 Process/Voltmeter
Excitation: ±15 Vdc, ±5 Vdc @ ±50 mA
Range/Input Impedance: 0-200 m Vdc 10 x 10e12 Ohms 0-5 Vdc 1 MOhms 0-10 Vdc 1 MOhms 4-20 mA 10 Ohms
Range Selection: Selectable by dip switch on rear of the unit

GENERAL SPECIFICATIONS
Accuracy: ± 0.01% of reading ± 1 count of A/D @ 25°C/77°F
Temperature Coefficient: 50 ppm/°C
Operating Temperature: -20 to 60°C (-4 to 140°F)
Display: -32768 to +32767 with programmable decimal points 0.56" (14mm) red LED
A/D Resolution : 16-bit
Input Bias Current: ±50 nA max ±100 pA/°C (per input channel)
Normal Mode Rejection:70 db
Rollover Error: ± 2 counts of A/D @ 25°C/77°F
Channels:One channel standard with second channel optional
Digital Filter: Programmable cutoff frequency 1 Hz to 500 Hz.
Display update: 3 times per second
Reading Rate: Limited to 1000 per second divided by number of channels
Input Analog Filter: 4 pole active antialias. 500 Hz cutoff on single channel unit and 250 Hz cutoff on dual channel unit
Power: 115/230 Vac selectable by switch on rear of unit DC Power (Optional): 10-30 Vdc @ 600 mA
Power Consumption: 8 Watts
Construction: Aluminum case
Dimensions: 69 H x 132 W x 175 mm D (2.7 H x 5.18 W x 6.9" D) (including I/O connector)
Panel Cutout: 63 H x 129 mm W (2.45 H X 5.06" W)
Weight: 370 g (13 oz)

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
Quick Ship
DP7600
MXN25,965.00
Disponible en: 10 Semanas
 
High speed load and strain indicator
Quick Ship
DP7600-R
MXN27,770.00
Disponible en: 10 Semanas
 
High speed load and strain indicator with dual relay outputs
Quick Ship
DP7600-A05
MXN29,575.00
Disponible en: 10 Semanas
 
High speed load and strain indicator with 0-5 Vdc analog output
Quick Ship
DP7600-S2
MXN28,820.00
Disponible en: 10 Semanas
 
High speed load and strain indicator with RS232 serial
Quick Ship
DP7700
MXN25,965.00
Disponible en: 10 Semanas
 
High speed process voltage and current indicator
Quick Ship
DP7700-R
MXN27,770.00
Disponible en: 10 Semanas
 
High speed process voltage and current indicator with dual relay outputs
Quick Ship
DP7700-A05
MXN29,575.00
Disponible en: 10 Semanas
 
High speed process voltage and current indicator with 0-5 Vdc analog output
Todas las cantidades que se muestran en MXN
Nota: For units with multiple options consult Pressure Engineering for availability.
Ejemplo de pedido: (1) DP7600-A05 high speed load and strain indicator with 0-5 Vdc analog output, MXN29,575.00

Generador de Número de Parte

Construya su Número de Parte Abajo
Opciónes de Descripción:


(1) Input Type seleccionar de:
DP7600 para strain gage bridge inputs
DP7700 para process voltage or current inputs

(2) Option seleccionar de:
para no option leave blank
-R para dual 2.5 A form "A" relays
-AMA para 4 to 20 mA analog output
-A05 para 0 to 5 Vdc analog output
-A10 para 0 to 10 Vdc analog output
-S2 para ASCII RS232 serial interface
-S4 para ASCII RS485 serial interface
-DUAL para Second input channel requires S2 or S4 option
-DC9/18 para 9 to 18 Vdc power @ 600 mA
-DC18/36 para 18 to 36 Vdc power @ 500 mA
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos
We noticed you are from the US. Visit your local site for regional offers and live support.