Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Correo de

High Performance Panel Indicators with Modular Construction - Discontinued

DP80 Series

Temperature Meter | DP80 Series

Temperature Meter

Ver Todas los Modelos Abajo

1 año de garantía
  • High Accuracy
  • 14 Thermocouple Input Types
  • 6 RTD Inputs: 4 Platinum, 10 Ohm Copper, and 120 Ohm Nickel Types
  • Thermistor Inputs: YSI 400 and 700 Series
  • Process Inputs: 4 Voltage and 2 Current
  • Easy to Operate and Modify
  • Modular Construction Allows Options to Be Field Installed
  • Single or Double Width Panel
  • Multiple Inputs up to 24 Thermocouples or 12 RTD Inputs
  • Optional Latching or Non-Latching Alarms
  • Scaling and Offset: Easy to Rescale Inputs for Displaying Direct Engineering Units
  • Optional Isolated Analog Output
  • Optional Fully Isolated RS-232/20 mA Digital Outputs
  • Math Expressions: Display the Rate Change, Max/Min. or Timed Average of Measurements
  • Optional DC Power: Fully Isolated 12 or 24 Vdc Power Can Be Used with Floating or Grounded Sensors


The DP80 Series series has been discontinued. Some stock may still be available as shown in the "To Order" section.

DP80 Series digital indicators offer complete expandability to effectively meet your changing needs. A custom designed, integrating voltage-to-frequency A/D converter combined with precision filtering, isolated electronics, and multi-segment digital linearizations lets the DP80 Series accommodate wide measuring ranges at a very high resolution - high enough to achieve laboratory accuracy in process and test measurements. The DP80 Series offer repeatability, reliability, and compatibility with most sensors. Temperature can be measured from -273 to 2318°C (-460 to 4206°F), or 0 to 2592 k, all with 0.1° resolution. DC voltage can be measured to 1 µV and ranges are available up to 100 V. Process voltage and current loops can easily be scaled from the front panel, within 99999 display counts. Strain-gage indicators measure load cells, pressure, torque, thrust, and force with 0.01% precision. Whether you’re measuring the temperature of molten metal or testing jet engine performance, make your choice a DP80 Series digital indicator.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Consultar Ventas  
Disponible en: 
Panel meter, single width, thermistor temperature input
Consultar Ventas  
Disponible en: 
Panel meter, single width, process current input
Consultar Ventas  
Disponible en: 
Panel meter, double width, thermistor temperature input
Consultar Ventas  
Disponible en: 
Panel meter, double width, RTD temperature input
Consultar Ventas  
Disponible en: 
Benchtop meter with 5 digit display, process current input
Consultar Ventas  
Disponible en: 
9 to 16 Vdc power
Consultar Ventas  
Disponible en: 
Four-wire delta input differential 4-wire input
Disponible en: Disponible
Alarms, dual limits
Consultar Ventas  
Disponible en: 
Scanning board
Consultar Ventas  
Disponible en: 
Scaling/offset,user selectable
Consultar Ventas  
Disponible en: 
Use with DP81
Consultar Ventas  
Disponible en: 
Use with DP81
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDP80-206
Consultar Ventas  
Disponible en: 
6-channel input board for Thermocouple, Voltage, Current inputs
Consultar Ventas  
Disponible en: 
3-channel input board for RTD and Thermistor inputs
Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo
Opciónes de Descripción:

(1) Single or Multi-Channel Digital Process Indicators seleccionar de:
DP81 para Panel metre/single width with 0.1° resolution
DP82 para Panel meter/double width with 0.1°
DP85 para Bechtop meter/4-digit display
DP86 para Benchtop meter/5-digit display with 0.1°

(2) Input Type seleccionar de:
T para Temperature
V para Voltage
Y para Thermistor
C para Current
R para RTD
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos

Manuales de Productos:

Descarga DP87 and DP88 - Digital Strain Indicators
Descarga DP85 and DP86 - Digital Panel Indicators
Descarga DP81 and DP82 - Digital Process Indicators
We noticed you are from the US. Visit your local site for regional offers and live support.