Ratemeters, Totalizers and Batch Controllers for Frequency Inputs

DPF75

Ver Todas los Modelos Abajo

HACER PEDIDO

Front Panel Programming and Scaling
Rate and Total in One Unit
Remote or Front Panel Reset
Optional Analog Output for Rate or Total
NEMA-4X Front Panel

Instrumentación para la medición de presión y tensión - Ver Productos Relacionados

Descripción

The DPF75 is a combination 6-digit totalizer/batch controller and 5½ digit ratemeter with 2 relays. The user can set one relay for batch and the other for rate alarm. The totalizer and ratemeter display in the same engineering units: units per second, minute, or hour. The DPF75 can accept 2 inputs and separately scale them for "A - B" or "A + B". Either input A rate or net total can be displayed.

The DPF76 is a 6-digit scalable totalizer/batch controller with 2 relays for 2-stage batch control. The DPF78 is a 4½ digit scalable ratemeter with 2 alarm relays.

SPECIFICATIONS
Input Power: 110 Vac ±15%, 220 Vac ±15%, 6.5 VA at rated AC voltage
Output Power (AC-Powered Units Only): +12 Vdc @ 50 mA unregulated— 10 + 50%
Rate Accuracy: ±0.1% of rdg + 1 LSD
K Factor: Up to 5-digits
Temperature:
Operating: 0 to 54°C (32 to 129°F)
Storage: -40 to 93°C (-40 to 199°F)
Memory: EEPROM stores data for 10 years if power lost
Pulse Input: Low = 0 to 1 Vdc; high = 4 to 30 Vdc; 10 kΩ impedance, up to 10 kHz; min 0.05 Hz for rate indication
Option "-LL": 30 mV min to 50V max p-p input, 10 kΩ impedance, 5 kHz max
Relays: Rated 5 A @ 240 Vac or 28 Vdc; SPST, selectable for NO or NC; relays latch or auto-recycle after 0.1 to 99.9 s
Panel Cutout: 4.5 H x 9.2 cm W (1.772 x 3.622"); DIN standard, 10.3 cm (4.06") depth
Shipping Weight: 907 g (2 lb)

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

DPF75

MXN12,335.00

Disponible en: 6 Semanas

Ratemeter and batch controller with 2 separate 10 A SPST relays for rate alarm or batching

DPF75-A

MXN17,920.00

Disponible en: 6 Semanas

Ratemeter and batch controller with 2 separate 10 A SPST relays for rate alarm or batching and 4-20 mA analog output

DPF75-RS232

MXN17,730.00

Disponible en: Disponible

Ratemeter and batch controller with 2 separate 10 A SPST relays for rate alarm or batching and RS232 communications

DPF75-RS422

MXN17,730.00

Disponible en: 6 Semanas

Ratemeter and batch controller with 2 separate 10 A SPST relays for rate alarm or batching and RS422 communications

DPF76

MXN10,405.00

Disponible en: 6 Semanas

Scalable totalizer/batch controller with relays

DPF78

MXN10,985.00

Disponible en: 6 Semanas

Scalable ratemeter with 2 separate 10 A SPST alarms

DPF78-A

MXN16,765.00

Disponible en: 6 Semanas

Scalable ratemeter with 2 separate 10 A SPST alarms and 4-20 mA analog output

FLSC-AMP

MXN3,475.00

Disponible en: 6 Semanas

Amplifier for amplifying low-level turbine and paddlewheel sensor inputs

Todas las cantidades que se muestran en MXN
Nota: For 220 Vac power, add suffix “-220 Vac” to part number No charge. For RS-232 or RS-422 output, add suffix “-RS232” or “RS-422” and add $128 to price. Example: DPF75-RS232 is a ratemeter/batch controller with RS-232 output. Price: $406. For field-selectable 4-20 or 0-20 mA output, add suffix “-A” to part number, and add $131 to price. -A option is not available on models with RS232 or RS422 option.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ejemplo de pedido: (1) DPF75-RS232 ratemeter/batch controller with RS-232 output., MXN17,730.00

Manuales de Productos:

Descarga DPF75,DPF76&DPF78 - Ratemeter, Totalizer and Batch Controllers