Pneumatic Parallel 2-Jaw Grippers with High Gripper Force

DPG Parallel Gripper - Compact & Robust Design

Parallel Grippers, Pnuematic

^MXN21,040.00 DPG-10M-1

HACER PEDIDO

2-Jaw Parallel Gripper Available in 4 Stroke Lengths
Pneumatic Grippers Can be Mounted and Operated in Any Orientation
Highly Configurable Modular Automation— Exclusive Direct Connect™ Robohand Technology Provides Multiple Mounting Options
Compact & Robust Design with High Gripper Force
Fail Safe Spring Assist Hold Jaws Closed with Loss of Air Pressure
Up to 5 million Cycles in Typical Life Cycle
Temperature Operating Range -35 to 80°C (-30 to 180°F)
Non-Synchronous and Single Jaw Motion
Precision Gripper - Repeatability and Accuracy of ±0.05 mm (±0.002")
Highly Configurable Modular Automation
Multiple Air Port Locations
Operates Under Pressure Range of 3 to 7 Bar (40 to 100 psi)
System Requires Air Filtration of 40 Micron or Better
4 Way, 2 Position Valve Required
Gripper Finger Tooling is Customer Responsibility

Movimiento - Ver Productos Relacionados

Descripción

DPG Series Pneumatic Gripper is a parallel 2-jaw gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws can be mounted on the bottom or side and are supported throughout the length of the body to make this gripper an extremely robust, yet compact, design. They are also available with optional spring assist ("-C" option) on the close stroke to prevent the part from being dropped in case there is a loss of air pressure. They are available in stroke lengths from 6.4 to 25.4 mm (0.25" to 1.00") with a gripper force of 222 N (50 lbs). The DPG pneumatic gripper shielded design allows this gripper to be used in harsh environments.

The DPG pneumatic gripper is a modular component and can be mounted to DLT Linear slides or DRG Rotary Actuators without additional adaptor plates. They can be mounted on the top or side and have air ports on the top, side and front to support mounting and operation in any direction. Top manifold air ports can be used to help eliminate tubing and fittings at the gripper location. Accessory mounting slots make it easy to add magneto sensors and inductive sensor kits are available, the grippers have built in slots for inductive sensor targets.

Pneumatic linear motion automation components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

DPG-10M-1

MXN21,040.00

Disponible en: Disponible

Pneumatic Gripper with 6.4mm (0.25") stroke

DPG-10M-1-C

MXN23,095.00

Disponible en: 12 Semanas

Pneumatic Gripper with spring assist and 6.4mm (.025") stroke

DPG-10M-2

MXN23,945.00

Disponible en: Disponible

Pneumatic Gripper with 12.7mm (0.50") stroke

DPG-10M-2-C

MXN26,000.00

Disponible en: 12 Semanas

Pneumatic Gripper with spring assist and 12.7mm (0.50") sroke

DPG-10M-3

MXN31,210.00

Disponible en: 12 Semanas

Pneumatic Gripper with 19.1mm (0.75") stroke

DPG-10M-3-C

MXN33,030.00

Disponible en: 12 Semanas

Pneumatic Gripper with spring assist and 19.1mm (0.75") stroke

DPG-10M-4

MXN28,450.00

Disponible en: 12 Semanas

Pneumatic Gripper with 25.4mm (.1.00") stroke

DPG-10M-4-C

MXN30,290.00

Disponible en: Disponible

Pneumatic Gripper with spring assist and 25.4mm (1.00") stroke

Sensor Accessories - Sensors and Cables Sold Separately

OISN-014

MXN6,630.00

Disponible en: Disponible

NPN inductive proximity sensor

OISP-014

MXN6,630.00

Disponible en: Disponible

PNP inductive proximity sensor

OSMK-119

MXN4,480.00

Disponible en: 9 Semanas

DPP-10M-14M inductive sensor mounting kit - mounts 2 sensors

OHSN-011

MXN4,580.00

Disponible en: 12 Semanas

NPN magneto resistive sensor 90º barrell with quick disconnect fitting

OHSP-011

MXN6,340.00

Disponible en: Disponible

PNP magneto resistive sensor, 90° barrell with quick disconnect fitting

OHSN-017

MXN4,580.00

Disponible en: Disponible

NPN magneto resistive sensor short barrell with quick disconnect fitting

OHSP-017

MXN6,830.00

Disponible en: Disponible

PNP magneto resistive sensor short barrell with quick disconnect fitting

CABL-010

MXN1,570.00

Disponible en: Disponible

2 m (6') sensor extension cable with quick disconnect fitting

CABL-013

MXN2,715.00

Disponible en: 12 Semanas

5 m (16') sensor extension cable with quick disconnect fitting

PNEUMATIC ACCESSORIES - See Related Links for Additional Accessory Selections

TYUTH95-532332-100

MXN860.00

Disponible en: 4 Semanas

Polyurethane 4mm (5/32") tubing 100 ft, assorted colors in stock

TYUTH95-14160-100

MXN1,775.00

Disponible en: 4 Semanas

Polyurethane 1/4' tubing 100 ft, assorted colors in stock

OM-AIR-C0K510405

Consultar Ventas

Disponible en:

Push-to-connect Flow Control (regulating out) valve, M5 thread - 4mm (5/32") OD

OM-AIR-C2VA00405

Consultar Ventas

Disponible en:

Push-to-connect Flow Control valve (regulating out), M5 thread - 1/4" OD

Todas las cantidades que se muestran en MXN
Nota: Add suffix "-C" to model number if requesting spring closed configuration.
Ejemplo de pedido: (1) DPG-10M-2-C gripper, size 2, spring closed , configuration, MXN26,000.00

Productos Relacionados: