Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Fuera de México:+52 (81) 8335-3774

DUAL PULSE TIMER

DPT35 Series

Dual Pulse Timer | DPT35 Series

Dual Pulse Timer

MXN15,860.00 DPT35

1 año de garantía
  • Single or Dual Pulse Timing
  • Easy Set-Up
Bombas y mezcladores - Ver Productos Relacionados

Descripción

The DPT35 digital counter-timer is designed to be used with (or similar) meters and flow sensors that produce a pulse signal. It is typically used in water treatment and chemical dosing applications, most often in cooling towers and boilers. The DPT35 serves as either a single or a dual timer, depending on whether one or both of its independent accumulators and timers are used. When the DPT35 is used as a single timer, the accumulator counts the pulses coming from the meter. When a pre-set number of pulses has been reached, output power turns on for a set time, and then the cycle repeats. For applications requiring dual timers (typically, one chemical feed and one water bleed), both accumulators and timers are set to operate independently, even though input is from a single meter or flow sensor. A sequential function can be selected to lock one timer out while the other is operating, this prevents feed and bleed from occurring simultaneously.

SPECIFICATIONS
Power: 115 Vac
Sensor Power: 12 Vdc
Output (2): 115 Vac
Enclosure: 127 x 178 mm (5 x 7") polycarbonate
Accumulator Range: 1 to 9999 pulses
Timer Range: 1 to 9999 seconds
Maximum Input: Frequency 1000 Hz
Relay Contact Rating: 5 A resistive @ 115 Vac, or 1/4 HP
Temperature: 0 to 55°C (32 to 130°F)
Weight: 4 lbs (64 oz)
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
Quick Ship
DPT35
MXN15,860.00
Disponible en: Disponible
 
Dual pulse timer relay output
Quick Ship
DPT35S
MXN19,000.00
Disponible en: 3 Semanas
 
Dual pulse timer solid state output
Todas las cantidades que se muestran en MXN
Nota: Comes complete with splash proof cover and operator’s manual.