Clamp-On Ultrasonic Energy Flow Meter - Discontinued

FDT-40E Series

Clamp-On Ultrasonic Energy Flowmeter

Ver Todas los Modelos Abajo

HACER PEDIDO

Bi-Directional Flow/Energy Measurement
Rugged, Aluminum Enclosure
Rate and Total Backlit Display
4 to 20 mA and Dual Alarm Outputs
USB Programming Port
RS485 MODBUS® Network Connection

Descripción

Discontinued, no replacement.

.
FDT-40E Series ultrasonic flow and energy meters clamp on to the outside of pipes and do not come in contact with the internal liquid. The technology has inherent advantages over alternate devices including: low-cost installation, no pressure head loss, no moving parts to maintain or replace, no fluid compatibility issue, and a large, bi-directional measuring range that ensures reliable readings even at very low and high flow rates. FDT-40E Series is available in a variety of configurations that permit the user to select a meter with features suitable to meet particular application requirements.

Specifications
System
Liquid Types: Most clean liquids or liquids containing small amounts of suspended solids or gas bubbles
Velocity Range: Bi-directional to greater than 40 FPS (12 MPS)
Flow Accuracy:
    Larger Than 50 mm (2"): ±1% of reading or ±0.01 FPS (0.003 MPS), whichever is greater
    25 to 50 mm (1 to 2"): ±1% of reading or ±0.04 FPS (0.012 MPS), whichever is greater
    19 mm (¾") and Smaller: ±1% of full scale
Temperature Accuracy:
    Absolute: 0.25°C (0.45°F)
    Difference: 0.1°C (0.18°F)
Energy Temperature Range: 0 to 100°C (32 to 212°F)
Sensitivity Flow: 0.001 FPS (0.0003 MPS)
Temperature: 0.025°C (0.05°F)
Repeatability: 0.5% of reading Transmitter
Power Requirements (AC): 95 to 264 Vac 47 to 63 Hz @ 17 VA maximum standard, 20 to 28 Vac 47 to 63 Hz @ 0.35 A maximum (“-24VAC” models), 10 to 28 Vdc @ 5 W maximum (“-VDC” models)
Protection: Auto resettable fuse, reverse polarity and transient suppression
Display: Two line LCD, LED backlit; top row 18 mm (0.7") height, 7-segment; bottom row 9 mm (0.35") height, 14-segment
Icons: RUN, PROGRAM, RELAY1, RELAY2
Flow Rate Indication: 8-digit positive, 7-digit negative maximum; auto decimal, lead zero blanking
Flow Totalizer: 8-digit positive, 7-digit negative maximum (re-set via keypad press, software, network command or momentary contact closure
Enclosure NEMA 4 (IP65) Construction: Powder-coated aluminum, polycarbonate, stainless steel, polyurethane, nickel-plated steel mounting brackets
Size (Electronic Enclosure Only): 152 W x 112 H x 56 mm D (6.0 x 4.4 x 2.2")
Conduit Holes: (2) ½ NPT female (1) ¾ NPT female
Temperature: -40 to 85°C (-40 to 185°F)
RTD: Platinum 385, 1000O, 3-wire
Configuration: Via optional keypad or PC running software (Note: not all configuration parameters are available from the keypad – i.e. flow and temperature calibration and advanced filter settings)
Engineering Units Flow Meter: Feet, gallons, cubic feet, million gallons, barrels (liquid and oil), acre-feet, lbs, meters, cubic meters, liters, million liters, kg
Engineering Units Energy Meter: BTU, MBTU, MMBTU, Tons
Inputs/Outputs USB 2.0: For connection of a PC running configuration utility
    RS485: MODBUS RTU command set
    4 to 20 mA: 12-bit, internal power, can span negative to positive flow/energy rates
Transducers
Construction
    Standard (FDT-41 thru 46): NEMA 6 (IP67), PVC, PEI, Nylon cord grip, PVC cable jacket
    Temperature: -40 to 60°C (-40 to 140°F)
    FDT-41 thru 46 with “-HT” option, FDT-47 and FDT-48: NEMA 6 (IP67), CPVC, PEI, Nylon cord grip, PVC cable jacket
    Temperature: -40 to 90°C (-40 to 194°F)
    FDT-47 “-HT”: NEMA 6 (IP67), PTFE, polyimide, Nickel-plated brass cord grip, PFA cable jacket
    Temperature: -40 to 176°C (-40 to 350°F)
Frequency:
    FDT-41 thru 46: 2 MHz
    FDT-47: 1 MHz
    FDT-48: 500 KHz
Cables: RG59 coaxial, 75 Ω or twin axial, 78 Ω (optional armored conduit)
Cable Length: Standard 6 m (20') [300 m (990') maximum in 3 m (10') increments; submersible conduit limited to 30 m (100') for transducers]
Software Utilities Utilized to configure, calibrate and troubleshoot flowmeters. Connection via USB A/B cable; software is compatible with Windows 2000, Windows XP, Windows Vista® and Windows® 7
RS485 Network All FDT-40 meters come equipped with RS485 drivers and utilize a MODBUS RTU command set (data can be returned in single-precision, doubleprecision, integer or floating point values). Up to 126 units products can be run on a single daisy-chain network and be individually queried for flow rate, positive flow accumulator, negative flow accumulator and signal strength. Flow accumulators can be cleared at discrete addresses or globally. The RS485 network is also compatible with direct to Excel, application.

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción



FDT-40E

Consultar Ventas

Disponible en:

Cant.

Energy flowmeter display 95 to 264 Vac, temperature range 0 to 100°C (32 to 212°F)



FDT-40E-VDC

Consultar Ventas

Disponible en:

Cant.

Energy flowmeter display 10 to 28 Vdc, temperature range 0 to 100°C (32 to 212°F)



FDT-40E-24VAC

MXN137,080.00

Disponible en: 3 Semanas

Cant.

Energy flowmeter display 24 Vac, temperature range 0 to 100°C (32 to 212°F)



FDT-40E-HT

Consultar Ventas

Disponible en:

Cant.

Energy flowmeter display 95 to 264 Vac, temperature range -40 to 177°C (-40 to 350°F)



FDT-40E-VDC-HT

MXN131,890.00

Disponible en: 3 Semanas

Cant.

Energy flowmeter display 10 to 28 Vdc, temperature range -40 to 177°C (-40 to 350°F)



FDT-40E-24VAC-HT

MXN137,080.00

Disponible en: 3 Semanas

Cant.

Energy flowmeter display 24 Vac, temperature range -40 to 177°C (-40 to 350°F)

Accessory Remote Transducers (Display Sold Separately)

Remote Transducers for ANSI Pipe (Display Sold Separately)



FDT-41-ANSI

Consultar Ventas

Disponible en:

Cant.

Transducer for 1/2" ANSI pipe



FDT-42-ANSI

MXN22,260.00

Disponible en: Disponible

Cant.

Transducer for 3/4" ANSI pipe



FDT-43-ANSI

Consultar Ventas

Disponible en:

Cant.

Transducer for 1" ANSI pipe



FDT-44-ANSI

Consultar Ventas

Disponible en:

Cant.

Transducer for 1 1/4" ANSI pipe



FDT-45-ANSI

Consultar Ventas

Disponible en:

Cant.

Transducer for 1 1/2" ANSI pipe



FDT-46-ANSI

Consultar Ventas

Disponible en:

Cant.

Transducer for 2" ANSI pipe

Remote Transducers for Copper Pipe (Display Sold Separately)



FDT-41-CP

Consultar Ventas

Disponible en:

Cant.

Transducer for 1/2" Copper pipe



FDT-42-CP

MXN22,260.00

Disponible en: Disponible

Cant.

Transducer for 3/4" Copper pipe



FDT-43-CP

Consultar Ventas

Disponible en:

Cant.

Transducer for 1" Copper pipe



FDT-44-CP

Consultar Ventas

Disponible en:

Cant.

Transducer for 1 1/4" Copper pipe



FDT-45-CP

Consultar Ventas

Disponible en:

Cant.

Transducer for 1 1/2" Copper pipe



FDT-46-CP

Consultar Ventas

Disponible en:

Cant.

Transducer for 2" Copper pipe

Remote Transducers for Tubing (Display Sold Separately)



FDT-41-TUBE

Consultar Ventas

Disponible en:

Cant.

Transducer for 1/2" tubing



FDT-42-TUBE

Consultar Ventas

Disponible en:

Cant.

Transducer for 3/4" tubing



FDT-43-TUBE

Consultar Ventas

Disponible en:

Cant.

Transducer for 1" tubing



FDT-44-TUBE

Consultar Ventas

Disponible en:

Cant.

Transducer for 1 1/4" tubing



FDT-45-TUBE

Consultar Ventas

Disponible en:

Cant.

Transducer for 1 1/2" tubing



FDT-46-TUBE

Consultar Ventas

Disponible en:

Cant.

Transducer for 2" tubing

Remote Transducers (Display Sold Separately)

FDT-47

MXN33,340.00

Disponible en: Disponible

Cant.

Transducer for 2 to 24" pipe



FDT-47-100FT

MXN42,645.00

Disponible en: 4 Semanas

Cant.

Transducer for 2 to 24" pipe with 100 ft of cable



FDT-47-HT

MXN130,615.00

Disponible en: 6 Semanas

Cant.

High temperature transducer for 2 to 24" pipe



FDT-47-HT-100FT

MXN139,890.00

Disponible en: 6 Semanas

Cant.

High temperature transducer for 2 to 24" pipe with 100 ft of cable



FDT-48

MXN53,520.00

Disponible en: 6 Semanas

Cant.

Transducer for pipes over 24"



FDT-48-100FT

MXN62,925.00

Disponible en: 6 Semanas

Cant.

Transducer for pipe over 24" with 100 ft of cable

Accessories



FDT-40-PC-CABLE

MXN2,430.00

Disponible en: 4 Semanas

Cant.

Optional USB PC programming cable



FDT-40-CABLE GLAND

MXN1,275.00

Disponible en: Disponible

Cant.

Optional cable gland



FDT-40-BHC

MXN3,375.00

Disponible en: 3 Semanas

Cant.

Brad Harrison connector for the FDT-40 Series



FDT-40-RTDCONN

MXN3,535.00

Disponible en: 4 Semanas

Cant.

RTD Pig Tail (connection adapter)



FDT-40-RTD1

MXN22,095.00

Disponible en: 4 Semanas

Cant.

RTD kit, clamp-on, 130C, 1000Ω 6.1 m (20')



FDT-40-RTD2

MXN27,715.00

Disponible en: Disponible

Cant.

RTD kit, clamp-on, 200C, 1000Ω 6.1 m (20')



FDT-40-RTD3

MXN40,655.00

Disponible en: 4 Semanas

Cant.

RTD kit, insertion, 3 x 1/4", 126C, 1000Ω Platinum RTD

FDT-GREASE

MXN2,485.00

Disponible en: Disponible

Cant.

Replacement acoustic couplant 150 g (5.3 oz)



FDT-HT-GREASE

MXN5,585.00

Disponible en: Disponible

Cant.

High temperature acoustic couplant 56 g (2 oz)

FDT-NS-GREASE

MXN2,485.00

Disponible en: 4 Semanas

Cant.

Non-silicone acoustic couplant 79 g (2.8 oz)

Todas las cantidades que se muestran en MXN
Nota: Comes complete with operator’s manual. Transducers come with mounting gel.

Transducers sold separately.

Generador de Número de Parte

Construya su Número de Parte Abajo

(1) (2) (3) (4)

FDT - -

REINICIAR

Opciónes de Descripción:

(1) Pipe and Tubing Sizes seleccionar de:
41 para 1/2 Inch
42 para 3/4 Inch
43 para 1 Inch
44 para 1 1/4 Inch
45 para 1 1/2 Inch
46 para 2 Inch
47 para 2 to 24 Inch
48 para Pipes over 24 inch

(2) Pipe and Tubing Material seleccionar de:
ANSI para ANSI pipe
CP para Copper pipe
TUBE para Plastic tubing

(3) High Temperature seleccionar de:
Nada (dejar el campo en blanco) para None
-HT para High temp transducers

(4) Cable Length seleccionar de:
Nada (dejar el campo en blanco) para Standard 6 m (20 feet)
-100FT para 30 m (100 feet)
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos