Top-to-Bottom Tube Mixers, Bung Mounted

FMXD11

Top-to-Bottom Bung-Entering Tube Mixers

^MXN29,665.00 FMXD11

HACER PEDIDO

Mixing Tubes and Motors Supplied Separately in Modular Construction for Maximum Flexibility
TEFC Electric, or Air Driven Models Available
Mix With a Non-Vortexing, Non-Aerating Action

Bombas y mezcladores - Ver Productos Relacionados

Descripción

FMXD11 mixers efficiently mix from the top of a 55-gallon drum to the bottom, without requiring removal of the drum lid. The optional IPS drum bung adaptor allows fixed mounting of the mixer to the drum. Mixers draw approximately 14 gallons of liquid (750 cp max viscosity, 1.8 S.G. max density) per minute through the 2" diameter mixing tube. Fluid temperature range is 0 to 93°C (32 to 200°F).

A shaft-mounted turbine inside the mixing tube rotates at 3450 RPM (from 300 to 3000 RPM for the air motor), creating a steady suction effect at the four upper intake ports. Liquid is forced down through the tube and forcefully expelled through the ports at the bottom of the tube, breaking up and dissolving settled particles (maximum solid size is ¹⁄8"). FMXD11 mixers work with a non-vortexing, non-aerating action.

The mixing tubes are just under 1 m (38") long. They have PTFE bearings at the center and base of the tube, and a graphite-filled PTFE seal. The shaft, turbine, mixing tube, and sleeve are 316 stainless steel. Mixers are available with either an air-driven or electric motor.

The air-driven ¾ HP motor operates with 10 to 15 CFM air at 3.4 to 6.2 bar (50 to 90 psig), and includes a flow regulator and muffler.

The TEFC electric ¼ HP motors are thermaloverload protected, and come with an on/off switch and a 3.6 m (12') three-wire cord with plug (FPUD421 supplied without plug).

CAUTION: DO NOT USE THE AIR MOTOR WITHOUT THE FMXD3-SK ANTI-STATIC PROTECTION KIT

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

MIXING TUBE

FMXD11

MXN29,665.00

Disponible en: 6 Semanas

Standard mixing tube

MIXER MOTORS

FPUD411

MXN36,215.00

Disponible en: 6 Semanas

1/4 HP, 3450 RPM Mixer Motor

FPUD421

MXN40,415.00

Disponible en: 6 Semanas

*1/4 HP, 2850 RPM Mixer Motor

FMXD11-AM

MXN20,910.00

Disponible en: 6 Semanas

3/4 HP, 3000 RPM Mixer Air Powered Motor

ACCESSORIES

FPUD5-PDA

MXN4,465.00

Disponible en: 6 Semanas

2" IPS polypro drum adaptor for FMXD11 mixers

FPUD5-GDA

MXN2,940.00

Disponible en: 6 Semanas

2" PS galvanized steel drum adaptor for FMXD11 mixers

FPUD5-SDA

MXN11,555.00

Disponible en: 6 Semanas

2" IPS 316SS drum adaptor for FMXD11 mixers

FMXD3-SK

MXN18,855.00

Disponible en: 6 Semanas

Static protection kit for FMXD11 std mixing tube

FPUD345-FL

Consultar Ventas

Disponible en:

Filter-lubricator assembly for FMXD11-AM motor, 3/4 FNPT connection

Todas las cantidades que se muestran en MXN
Nota: Comes complete with operator's manual.

Use the air motor and the FMXD3-SK static protection kit for mixing flammable materials or in explosive environments.

Use a filter/regulator and lubricator in the air supply line if the air is not filtered and lubricated.

* CE certified.

Ejemplo de pedido: (1) FMXD11 standard mixing tube, MXN29,665.00 plus (1) FMXD11-AM 3/4 HP, 3000 RPM Mixer Motor, MXN20,910.00 plus (1) FMXD3-SK Static protection kit, MXN18,855.00 , MXN29,665.00 + 20,910.00 + 18,855.00 = MXN69,430.00