Insertion Paddlewheel Flow Sensors

FP7001A

^MXN11,840.00 FP7001A

HACER PEDIDO

Measures Both Flow and Temperature Simultaneously
Very Economical
Wide Chemical Compatibility
High Level Pulse Output for Flow - No Amplifier Needed
10mV/°C Analog Temperature Output

Medidores de agua - Ver Productos Relacionados

Descripción

The OMEGA™ FP7001A paddlewheel flow and temperature sensor is ideal for accurate monitoring of typical industrial water flows, hard-to-handle corrosive aqueous solutions, and high purity fluids . The FP7001A utilizes a paddlewheel-like rotor whose motion is converted into a high-level square wave pulse output by an open collector Hall effect sensor. Pulse amplitudes from 5 to 18 V are possible, depending on input power. The FPW-15 120 Vac converter plugs directly into a wall socket and outputs a regulated 15 Vdc at 400 mA.

The DPF700 Series panel meter supplies power for the flow sensor and provides rate indication, or totalization and batch control (when ordered with the dual relay option). When ordered with the analog output option, the DPF700 can be used to interface the FP7001A flow signal to such items as strip chart recorders, dataloggers, and computer interfaces.

The system consists of the flow sensor, an installing fitting, and the electronics. The PVC tee fittings are supplied with a PVC locking nut, and the galvanized iron tee fittings are supplied with a brass locking nut to provide secure metal-to-metal mounting to the threaded brass insert.

The FP7001A is not compatible with FP-5300 or FMG-5300 Series installation fittings. When powered by the FPW-5 five Vdc wall socket converter, the FP7001A has a TTL level pulse output which can be used with a variety of pulse input flow indicators, signal conditioners and controllers. It is not compatible with the FPM 5500/5740.

SPECIFICATIONS
Accuracy: ±2% of full scale
Repeatability: ±1% of full scale
Power: 5 to 18 Vdc @ 10 mA maximum
Wetted Materials: FP7001A sensor: polypropylene body, PVDF paddle, FKM O-ring, 316SS shaft. Galvanized iron tee includes brass insert and locking nut. PVC tee has PVC insert and locking nut.
Fluid Temperature/Pressure Range: Do not exceed the maximum ratings of your piping. Depending on the material of the fitting, the operating temperature/pressure may be limited by your piping and not by the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C (100°F), 60 psig @ 49°C (120°F) 30 psig @ 60°C (140°F), due to the insert in the tee. FP7001A sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max. pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig max
Frequency Output: Nominal 1 Hz/fps; amplitude of open collector pulse = Vdc input power
Cable Length: 2.4 m (8'')
Weight: 0.2 kg (1/2 lb); FP7030 fitting: 4.3 kg (9.5 lb); FP7030-GI fitting: 2.8 kg (6.25 lb)
Max Viscosity: 5 cps
Temperature Sensor Specifications
Range: 2 to 150°C (36 to 302°F)
Accuracy: ±1°C
Output: 10 mV/°C
Power: 5 to 18 Vdc

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

FP7001A

MXN11,840.00

Disponible en: 3 Semanas

Paddlewheel Sensor with Polypropylene body/316SS shaft and Temperature Sensor

Fittings (required)

FP7007

MXN3,880.00

Disponible en: 2 Semanas

3/4 " PVC Tee

FP7007-GI

MXN6,285.00

Disponible en: 3 Semanas

3/4 " Galvanized Iron Tee

FP7010

MXN3,880.00

Disponible en: 3 Semanas

1" PVC Tee

FP7010-GI

MXN5,505.00

Disponible en: 3 Semanas

1" Galvanized Iron Tee

FP7012

MXN4,015.00

Disponible en: 3 Semanas

1-1/4 " PVC Tee

FP7012-GI

MXN5,505.00

Disponible en: Disponible

1-1/4 " Galvanized Iron Tee

FP7015

MXN4,520.00

Disponible en: 3 Semanas

1-1/2 " PVC Tee

FP7015-GI

MXN5,050.00

Disponible en: 3 Semanas

1-1/2 " Galvanized Iron Tee

FP7020

MXN5,050.00

Disponible en: 3 Semanas

2" PVC Tee

FP7020-GI

MXN5,275.00

Disponible en: 3 Semanas

2" Galvanized Iron Tee

FP7025

MXN5,275.00

Disponible en: 3 Semanas

2-1/2" PVC Tee

FP7025-GI

MXN7,525.00

Disponible en: 4 Semanas

2-1/2 " Galvanized Iron Tee

FP7030

MXN6,285.00

Disponible en: 3 Semanas

3" PVC Tee

FP7030-GI

MXN8,535.00

Disponible en: 2 Semanas

3" Galvanized Iron Tee

Popular Panel Meters

DPF75

MXN12,335.00

Disponible en: 6 Semanas

1/8 DIN Panel Meter for Rate and Totalization

DPI8

MXN10,975.00

Disponible en: 6 Semanas

1/8 DIN Panel Meter for Temperature Display

Accessories

FLSC-100

Consultar Ventas

Disponible en:

Transmitter module for FP7001A

Todas las cantidades que se muestran en MXN
Nota: Comes with operator''s manual.
Ejemplo de pedido: (1) FP7001A paddlwheel sensor with temperature sensor, MXN11,840.00 plus (1) FP7007 3/4, MXN3,880.00 plus (1) DPI8 Display for temperature sensor, MXN10,975.00 plus (1) DPI8 Display for temperature sensor, MXN10,975.00 plus (1) FP7001A paddlwheel sensor with temperature sensor, MXN11,840.00 plus (1) FP7007 3/4, MXN3,880.00, MXN11,840.00 + 3,880.00 + 10,975.00 + 10,975.00 + 11,840.00 + 3,880.00 = MXN53,390.00

Manuales de Productos:

Descarga FP7001 Series - Paddlewheel Flowsensors

Productos Relacionados: