Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Fuera de México:+52 (81) 8335-3774

Omegaflex ® OEM Style Peristaltic Pump Kits

FPU400 Series

Omegaflex ® OEM Style Peristaltic Pump Kits | FPU400 Series

Omegaflex ® OEM Style Peristaltic Pump Kits

Ver Todas los Modelos Abajo

1 año de garantía
  • Suitable for Fluids Carrying Small Particles
  • Easy to Maintain
  • Mounting Panel Standard
Bombas y mezcladores - Ver Productos Relacionados

Descripción

FPU400 Series peristaltic pumps offer simplicity at a reduced cost. The motor turns the rollers, which squeeze fluid through the precision-bore high-tolerance tubing in a wavelike motion, acting like a positive displacement pump. The fluid doesn’t touch the pump; it only comes into contact with the tubing. This makes the pump suitable for fluids carrying small particles. FPU400 pumps continuously overocclude the tubing, which makes the pump self-priming and non-siphoning. They are easy to maintain, with few moving parts and no seals or valves to clog, clean, or replace. As one section of tube fatigues, just move the tubing to a section that hasn’t been under the rollers and continue pumping. Or simply replace the supplied tubing. The replacement 230 mm (9") lengths of precision-bore tubing ensure repeatable pumping rates time after time. Union connectors for hooking up system tubing are sold seperately. The replacement 230 mm (9") lengths of tubing come without connectors. The pumps are supplied standard with a mounting panel. The AC-powered pumps are also available in a rugged polycarbonate enclosure for bench mounting. Maximum backpressure is 15 psi without derating (up to 25 psi @ 75% of maximum flow). Maximum suction head is 8.5 m (28'). Flow rate repeatability from one pump to the next or when replacing tubing is within 8% of maximum flow rate listed. Shipping weight is 1.6 kg (3.5 lb) for all sizes. These pumps are ideal for metering/dosing, repetitive dispensing, and general liquid/gas transfer, and they have a 100% duty cycle for continuous operation.

SPECIFICATIONS (FPU400)
Mounting Plate: 94 L x 130 W x 109 mm D (3.74 x 5.12 x 4.28"); 5.6 mm (0.22") diameter holes are centered 76 x 110 mm (3.0 x 4.34") on the plate
For units with rear fan: 130 L x 130 W x 135 mm D (5.11 x 5.12 x 5.28") overall
Shipping Weight: 1.6 kg (3.5 lb)
Ambient Temp Range: 20 to 30°C (68 to 86°F)
Max Liquid Viscosity: 8500 cp

Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
Quick Ship
FPU410
MXN5,140.00
Disponible en: 6 Semanas
 
172RPM, 115Vac, peristaltic pump kit
Quick Ship
FPU411
Consultar Ventas  
Disponible en: 
 
 
203RPM, 115Vac, peristaltic pump kit
Accessory Tubing
Quick Ship
FPU116-N
MXN475.00
Disponible en: Disponible
 
Replacement Norprene or Tygon tubing (depending on stock), 1/16' X 1/8'
Quick Ship
FPU116-S
MXN485.00
Disponible en: Disponible
 
Silicone tubing, 1/16' X 1/8'
Quick Ship
FPU14-N
MXN475.00
Disponible en: Disponible
 
Replacement Norprene or Tygon tubing (depending on stock), 1/4' X 7/16'
Quick Ship
FPU14-S
MXN475.00
Disponible en: Disponible
 
Silicone tubing, 1/4' X 7/16'
Quick Ship
FPU18-N
MXN485.00
Disponible en: 4 Semanas
 
Replacement Norprene or Tygon tubing (depending on stock), 1/8' X 3/8'
Quick Ship
FPU18-S
MXN485.00
Disponible en: Disponible
 
Silicone tubing, 1/8' X 3/8'
Quick Ship
FPU316-S
MXN485.00
Disponible en: Disponible
 
Silicone tubing, 3/16' X 3/8'
Tubing Union Fittings (sold separately)
Quick Ship
FTPP-N210NP
MXN250.00
Disponible en: Disponible
 
1/16" Tubing union connectors (Natural Polyp)
Quick Ship
FTPP-N230NP
MXN250.00
Disponible en: Disponible
 
1/8" Tubing union connectors (Natural Polyp)
Quick Ship
FTPP-CO-4NP
MXN182.00
Disponible en: Disponible
 
1/4" Tubing union connectors (Natural Polyp)
Quick Ship
FTPP-5050NP
MXN299.00
Disponible en: Disponible
 
3/16" Tubing union connectors (Natural Polyp)
Todas las cantidades que se muestran en MXN
Nota: FPU400 Series comes complete with four 230 mm (9") lengths of Norprene tubing (1/16, 1/8, 3/16, and 1/4"), 2 rollers, mounting plate and operator’s manual.

†Tubes are supplied inserted into 3/16 X 3/8" tubes. Connection is made to the 1/16 X 1/8" internal tubing. Brushless 115 Vac, 60 Hz induction motors; flow rates based on pumping water.

Tubing union fittings are sold separately.