Electronically Controlled Proportional Valves

FSV10 Series

Electronic proportioning solenoid valves

Ver Todas los Modelos Abajo

HACER PEDIDO

Pulsewidth-Modulated Control Circuit
Accepts 0 to 5 Vdc or 4 to 20 mA Setpoint Inputs
Made of Corrosion- Resistant 316 and 416 SS/FKM

Válvulas - Ver Productos Relacionados

Descripción

The FSV10 Series electronic proportioning solenoid valves can control the flow of a wide variety of gases and liquids. The variablestroke electromagnetic valve is pulsed by the driver electronics, maintaining the correct magnetic flux level in the solenoid and holding flow at the level of the analog input setpoint signal. A TTL-level input allows the valve to be shut off regardless of analog setpoint signal.
The output power level of the driver electronics is jumper selectable for cooler, more efficient operation. The FSV10 Series requires 12 to 30 Vdc, supplied by the optional FSV-PW 110 Vac plug-in power supply or via the 9-pin D connector (included). These valves come with 8 inches of wire, which must be soldered to the 9-pin D connector.

SPECIFICATIONS
Turndown Ratio: 100:1
Response Time: 500 msec max
Fluid Temperature Range: -10 to 54°C (14 to 130°F)
Typical Valve Surface Temperature: 54°C (130°F) with 24 Vdc power input
Required Power Input (Not Included): 12 to 30 Vdc, 1 A @ 12 Vdc; 0.5 A @ 24 Vdc via 9-pin D connector or DC power jack
Connection: ¼" compression fittings
Setpoint Input Signal: 0 to 5 Vdc or 4 to 20 mA
Valve Dimensions: 87.6 H x 87.6 L x 25.4 mm W (3.45 x 3.25 x 1.00") including compression fittings
Driver Electronics: 7.62 W x 7.62 D x 25.4 mm H (3 x 3 x 1")
Materials in Fluid Contact: 316 and 416 SS, FKM O-rings
Maximum Pressure: 500 psig (3448 kPa)
Maximum Differential Pressure: 50 psid (345 kPa); 35 psid (241 kPa) for FSV15
Leak Integrity: 1 x 10^-9 sccs; helium, individually tested
Ambient Temperature: 0 to 50°C (32 to 122°F)
CE Compliance: EMC Directive
89/336/EEC EN55011:1991; Group 1,
Class A EN50082-2:1995

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

RoHS

Descripción

MY OMEGA RoHS

El número de parte es RoHS Cumple.

El número de parte NO es RoHS Cumple.

Cumplimiento de RoHS del número de parte es indeterminado .

Puede ser ordenado como RoHS , sin embargo, ese requisito se debe especificar en el momento de hacer el pedido añadiendo "-rohs" al final del número de parte.

Busca la conformidad de números de parte específicos o más detalles acerca de Conformidad RoHS.

FSV11

MXN16,830.00

Disponible en: Disponible

0.51(0.02) orifice size, 0.009 Cv, 3500 mL/min Air, 125 mL/min Water at Maximum Flow

FSV12

MXN16,830.00

Disponible en: Disponible

1.02 (0.04) orifice size, 0.033 Cv, 13,000 mL/min Air, 400 mL/min Water at Maximum Flow

FSV13

MXN16,830.00

Disponible en: 4 Semanas

1.4 (0.055) orifice size, 0.055 Cv, 21,500 mL/min Air, 700 mL/min Water at Maximum Flow

FSV14

MXN16,830.00

Disponible en: Disponible

1.6 (0.063) orifice size, 0.068 Cv, 25,000 mL/min Air, 850 mL/min Water at Maximum Flow

FSV15

MXN16,830.00

Disponible en: Disponible

3.18 (0.125) orifice size, 0.24 Cv, 100,000 mL/min Air, 2873 mL/min Water at Maximum Flow

Accessory

FSV-PW

MXN1,915.00

Disponible en: Disponible

110 Vac/24Vdc wall socket power supply with 1.7 m (5.5') cord

Todas las cantidades que se muestran en MXN
Nota: Comes complete with operator’s manual, driver module and 9-pin D connector.

*Based on 10 psig (690 mbar) differential pressure.

For Oxygen Cleaning add suffix, "-O2" to the model number; add $125 to price.

Ejemplo de pedido: (1) FSV11 Proportioning solenoid valve with valve driver module, 20 cm (8'') wires on the valve and a mating 9-pin D connector, MXN16,830.00