MINI PLASTIC FLOW SWITCH

FSW-120 Series

Flow Switch | Plastic | Mini

Ver Todas los Modelos Abajo

HACER PEDIDO

Small and Lightweight
Plastic and Stainless Steel Construction
No Switch-Point Adjustment

Interruptores, caudalímetros de área variable y caudalímetros de área variable - Ver Productos Relacionados

Descripción

The FSW-120 Series of compact PPS switches are ideal for use where space is at a premium. Designed for use with water and water based solutions, these switches are suitable for high volume OEM applications. They are ideal for coolant or chemical monitoring in portable equipment and many other applications with space constraints. The switch points are based on water flow, other liquids may require field testing.

Specifications
Wetted Materials:
Housing and piston PPS Spring 316 stainless steel O-Ring FKM Other wetted parts epoxy
Maximum Pressure: 17.2 bar (250 psig) at 21°C (70°F)
Operating Temperature: -17 to 107°C (0 to 225°F)
Set Point Accuracy: ±15% maximum
Set Point Differential: 20% maximum
Relay: SPDT 20 VA
Inlet/Outlet Ports: 9/16" -18 UNF-2B thread (NPT adaptors available)
Recommended Filtration: 50 Microns or better
Electrical Termination: 18 AWG, zipcord, 609 mm (24") long
Weight: 140 g (5 oz)

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

FSW-121

Consultar Ventas

Disponible en:

Plastic flow switch 0.10 GPM switch point

FSW-122

Consultar Ventas

Disponible en:

Plastic flow switch 0.25 GPM switch point

FSW-123

Consultar Ventas

Disponible en:

Plastic flow switch 0.50 GPM switch point

FSW-124

Consultar Ventas

Disponible en:

Plastic flow switch 0.75 GPM switch point

FSW-125

Consultar Ventas

Disponible en:

Plastic flow switch 1.00 GPM switch point

FSW-126

Consultar Ventas

Disponible en:

Plastic flow switch 1.50 GPM switch point

Accessories

FSW-120-18

Consultar Ventas

Disponible en:

9/16"-18 UNF to ¹/8 NPT adaptor

FSW-120-14

Consultar Ventas

Disponible en:

9/16"-18 UNF to ¹/4 NPT adaptor

Todas las cantidades que se muestran en MXN
Nota: Comes complete with operator’s manual.

Notes: Flow settings are calibrated using water at 21°C (70°F) on increasing flow, with units in a vertical position. Care should be taken to ensure fluid compatibility with the above listed wetted materials.