Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Fuera de México:+52 (81) 8335-3774

Turbine Flowmeters with Economical Ball Bearing Design

FTB-100 Series

Turbine Flowmeters with Economical Ball Bearing Design | FTB-100 Series

Turbine Flowmeters with Economical Ball Bearing Design

Ver Todas los Modelos Abajo

1 año de garantía
  • NIST Certificate Included for Water
  • ±1/2% Rdg Accuracy
  • Non-Metallic Bearing Retainers for Long Life
  • Replacement Bearings Field Installable Without Loss of Calibration
  • Disassembles Quickly for Easy Maintenance
  • Deflector Cones Stabilize Low Mass Rotor for Increased Bearing Life
  • 4 to 20 mA, 0-5 V, and Scaled Frequency Outputs Available
Caudalímetros de turbina y rueda de paletas - Ver Productos Relacionados

Descripción

The FTB-100 Series of turbine meters have a sealed ball bearing design for high accuracy performance (±½% of reading, not full scale) at an economical cost. The non-metallic bearing retainers minimize friction, thereby allowing these meters to be used with clean fluids that have poor lubricating properties ( i.e.water). Ball bearings also give the widest linear flow range, particularly in larger turbines. Bearing replacement and clean-up are fast and easy, since all internal parts are easily accessible by removing a single nut.

These turbine flowmeters have a low mass rotor design which allows rapid dynamic response, so they can be used in pulsating flow applications. Deflector cones eliminate downstream thrust on the rotor and allow hydrodynamic positioning of the rotor between the cones. This provides wider rangeability and longer bearing life than conventional turbine flowmeters. Integral flow-straightening tubes minimize the effects of upstream turbulence.
FTB-100 Turbine Meters are available with integral signal conditioners (as shown in photo) which provide scaled and unscaled frequencies, 4-20 mA, or 0-5 Volt outputs. Units without integral signal conditioners are supplied with mating connector for two-wire hook-up.

SPECIFICATIONS
Accuracy: ±½% of reading
Repeatability: ±0.1% of reading
Maximum Temperature Range: -268 to 232°C (-450 to 450°F)
Maximum Intermittent Overrange: 150% of maximum range
Minimum Output Amplitude: 30 mV Peak-to-Peak Unscaled Pulse
Materials of Construction:
   Body: 304 stainless steel; 1/2 NPT bodies contain Silver Solder. 3/4 NPT and larger are welded.
   Rotor: 17-4 pH steel
   Bearings: Ceramic
Minimum straight pipe requirements: 10 pipe diameters upstream, 5 downstream

Model No. Fittings Linear Flow Range
Water
Max Operating Pressure Max Pressure Drop Length
mm (in)
Nominal
K-Factor
Pulses/Gal
Weight
kg (lb)
LPM GPM
FTB-101 ½ MNPT 1.32 to 13.2 0.35 to 3.5 5000 psig 3.0 psid 62 (2.45) 13,000 0.4 (1)
FTB-102 ½ MNPT 2.84 to 28.4 0.75 to 7.5 5000 psig 5.0 psid 62 (2.45) 10,000 0.4 (1)
FTB-103 ½ MNPT 4.73 to 36 1.25 to 9.5 5000 psig 5.2 psid 62 (2.45) 6,000 0.4 (1)
FTB-104 ¾ MNPT 6.62 to 61 1.75 to 16 5000 psig 3.0 psid 70 (2.75) 4,100 0.4 (1)
FTB-105 ¾ MNPT 9.5 to 110 2.5 to 29 4250 psig 5.0 psid 83 (3.25) 2,200 0.4 (1)
FTB-106 1 MNPT 15 to 227 4 to 60 3850 psig 5.1 psid 89 (3.5) 640 0.9 (2)
FTB-107 1¼ MNPT 23 to 352 6 to 93 3850 psig 4.3 psid 99 (3.88) 410 0.9 (2)
FTB-108 1½ MNPT 30 to 492 8 to 130 3000 psig 3.0 psid 111 (4.38) 230 1.4 (3)
FTB-109 2 MNPT 57 to 852 15 to 225 2500 psig 3.3 psid 121 (4.75) 120 1.8 (4)
FTB-110 2½ MNPT 95 to 1514 25 to 400 2250 psig 4.0 psid 154 (6.06) 62 2.3 (5)
FTB-111 3 MNPT 151 to 2460 40 to 650 2000 psig 4.0 psid 191 (7.50) 55 3.2 (7)
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloFTB-101
FTB-101
MXN39,120.00
Disponible en: 4 Semanas
 
0.35-3.5 GPM Range, Water; 1/2 MNPT
Quick Ship
  
FTB-102
MXN39,120.00
Disponible en: Disponible
 
0.75-7.5 GPM Range, Water; 1/2 MNPT
Quick Ship
  
FTB-103
MXN39,120.00
Disponible en: 5 Semanas
 
1.25-9.5 GPM Range, Water; 1/2 MNPT
Quick Ship
  
FTB-104
MXN39,120.00
Disponible en: 1 Semana
 
1.75-16 GPM Range, Water; 3/4 MNPT
Quick Ship
  
FTB-105
MXN39,120.00
Disponible en: Disponible
 
2.5-29 GPM Range, Water; 3/4 MNPT
Quick Ship
  
FTB-106
MXN43,175.00
Disponible en: Disponible
 
4-60 GPM Range, Water; 1 MNPT
Quick Ship
  
FTB-107
MXN45,845.00
Disponible en: 7 Semanas
 
6-93 GPM Range, Water; 1¼ MNPT
Quick Ship
  
FTB-108
Consultar Ventas  
Disponible en: 
 
 
8-130 GPM Range, Water; 1½ MNPT
Quick Ship
  
FTB-109
MXN55,685.00
Disponible en: 1 Semana
 
15-225 GPM Range, Water; 2 MNPT
Quick Ship
  
FTB-110
MXN71,665.00
Disponible en: 7 Semanas
 
25-400 GPM Range, Water; 2½ MNPT
Quick Ship
  
FTB-111
MXN71,665.00
Disponible en: 7 Semanas
 
40-650 GPM Range, Water; 3 MNPT
Todas las cantidades que se muestran en MXN
Nota: Comes with NIST certificate for water and complete operator’s manual.
Standard NIST calibration: Viscosity = 1CK: no charge; 0.8 CK to 0.99 CK: add $370; 2 CK to 100 CK: for FTB-101 through FTB-107, add $625; for FTB-108 and FTB-109, add $625, and for FTB-110 and FTB-111, add $465.
If an integral signal conditioner is required please order as a system. Omega will scale the signal conditioner to the turbine meter.
Example: SYS/FTB-101/FLSC-C1-LIQ, scaled system includes: Signal Conditioner, Enclosure, Turbine Meter and Fitting, $1954.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ejemplo de pedido: (1) FTB-105 Liquid turbine meter calibrated to water 2.5 to 29 GPM, .75, MXN39,120.00
Did you know Omega has an office in the United States with local pricing and live engineers to support you in your time zone?