Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

Vortex Flow Meters for Industrial Applications

FV500C

Vortex Flow Meters | Industrial | FV500C

Vortex Flow Meters | Industrial

MXN102,500.00 DY050-DBMBA1-2D/FF1

1 año de garantía
  • Custom Built to Order - CONSULT FLOW ENGINEERING
  • SSP (Spectral Signal Processing) Technology
  • Measures Steam, Gas, and Low Viscosity Liquids
  • Clear Parallel Two-Line LCD Display. Displays Simultaneous Flow Rate and Total Along with Process Diagnosis
  • New, Compact Amplifier Housing: Lighter, Small and Easier to Handle
  • No Start-Up Tuning
  • Low Flow Stability
  • Advanced Self-Diagnostics
  • No Moving Parts
  • Simultaneous Analog and Pulse Outputs (Pulse requires Display)
  • Status Output (Flow Switch Function) or Alarm Output
  • Configurable Through Local Display Interface
  • High Accuracy: ±0.75% Rdg (Liquid), ±1% Rdg (Gas, Steam)
  • Learn more about the principle of vortex flow meters.
Caudalímetros a emisión de vórtices y tubos de Pitot - Ver Productos Relacionados

Descripción

THIS PRODUCT REQUIRES YOU TO CONSULT WITH FLOW ENGINEERING PRIOR TO ORDERING
Please be prepared to complete the "Vortex/Pitot Tube Order Questionnaire" (Download in the Related Links Below) so you can fax or email it to Flow Engineering.


OMEGA’s FV-500C Series vortex flowmeter provides accurate, reliable, low-maintenance flow measurement. Vortices generated by the flowing fluid stress the shedder bar in pulses, and the shedder bar transmits the stress pulses to the encapsulated piezoelectric sensor.

Please contact Omega FLOW Engineering by phone, fax, or email flow@omega.com to size the vortex flow meter for your application. All the vortex meters are custom built to order. A display is highly recommended for any fine tuning adjustments required.

Based on the field proven sensor technology of the FV-500C Series vortex flowmeters, FV-500C features a new amplifier with proprietary spectral signal processing (SSP) technology to analyze the vortex waveform into its spectral components to filter noise from signal for the most stable measurement possible.

The FV-500C Series will provide excellent vibration immunity for stable, accurate measurements at low flows without any need for start-up tuning. The user benefits through greater reliability, reduced maintenance and a lower total cost of ownership.

The programmable display allows access to the full power of OMEGA’s new intelligent amplifier. The display is required if you would like to access the pulse output programming. The display is highly recommend if an adjustment or tweaking is required for the flow measurement application. The display also permits the user to display flow rate and/or total in engineering units for liquids and gases. Rate and total are displayed simultaneously. If the density or enthalpy of the fluid is constant (i.e. the temperature and pressure do not change), the density value can be entered into the meter to display in kilograms, pounds or metric tons; the enthalpy value can be entered to display in BTUs, kilojoules, etc. Analog output span adjustment and low cutoff are also settable from the display, there is no need to adjust pots. The analog and pulse outputs can also be forced to output from 0 to 100% FS or 0 to 6000 Hz without any flow through the meter as a test of the amplifier. For steam flow measurement, the FV-500C can be used with the OMEGA™ FC-20 mass flow computer. The standard FV-500C is wafer-style to slip between 150# ANSI flanges, and comes supplied with extra long bolts for installation. Units with the suffix “-F” have 150# ANSI flanges, 300 lb flange mount is available.

Model No.
(Without Display Module)
Description Lay Length
(mm/inches)
Weight
(kg/lbs)
FV-505C1/2" wafer mount70 (2.8)2.8 (6)
FV-505C-F1/2" flange mount70 (2.8)2.8 (6)
FV-510C1" wafer mount70 (2.8)3.7 (8)
FV-510C-F1" flange mount70 (2.8)3.7 (8)
FV-515C1 1/2" wafer mount70 (2.8)4.3 (9.5)
FV-515C-F1 1/2" flange mount70 (2.8)4.3 (9.5)
FV-520C2" wafer mount75 (3.0)6 (14)
FV-520C-F2" flange mount75 (3.0)6 (14)
FV-530C3" wafer mount100 (3.9)9.4 (21)
FV-530C-F3" flange mount100 (3.9)9.4 (21)
FV-540C4" wafer mount120 (4.7)12.8 (28)
FV-540C-F4" flange mount120 (4.7)12.8 (28)
FV-560C-F6" flange mount270 (10.6)36.4 (80)
FV-580C-F8" flange mount310 (12.2)55.4 (122)
FV-591C-F10" flange mount370 (14.6)90 (199)
FV-592C-F12" flange mount400 (15.7)140 (308)
Note: Units with “ -F” suffix have 150 class flange connections, 300 lb flange mount is available if needed.
For units with a display, add “-D” to the part number and $403 to the price.
For units with remote electronics, add “-R” to the part number, subtract $455 from the price, and order the mounting kit and cable below.
For units designed for high temperature use, add “-HT” to the model number and consult engineering for prices.


THIS PRODUCT REQUIRES YOU TO CONSULT WITH FLOW ENGINEERING PRIOR TO ORDERING
Please be prepared to complete the "Vortex/Pitot Tube Order Questionnaire" (Download in the Related Links Below) so you can fax or email it to Flow Engineering.
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
DY015-DBMAA1-2D/FF1
MXN87,965.00
Disponible en: 6 Semanas
 
1/2" Wafer Style Vortex Flowmeter W/Display
DY015-DBMAA1-2N/FF1
MXN88,550.00
Disponible en: 6 Semanas
 
1/2" Wafer Style Vortex Flowmeter
DY015-DBMBA1-2D/FF1
MXN100,005.00
Disponible en: 6 Semanas
 
1/2" ANSI class 150 Flange Vortex Flowmeter W/Display
DY015-DBMBA1-2N/FF1
MXN75,335.00
Disponible en: 6 Semanas
 
1/2" ANSI class 150 Flange Vortex Flowmeter
DY025-DBMAA1-2D/FF1
MXN87,080.00
Disponible en: 6 Semanas
 
1" Wafer Style Vortex Flowmeter W/Display
DY025-DBMAA1-2N/FF1
MXN74,600.00
Disponible en: 6 Semanas
 
1" Wafer Style Vortex Flowmeter
DY025-DBMBA1-2D/FF1
MXN100,005.00
Disponible en: 6 Semanas
 
1" ANSI class 150 Flange Vortex Flowmeter W/Display
DY025-DBMBA1-2N/FF1
MXN87,670.00
Disponible en: 6 Semanas
 
1" ANSI class 150 Flange Vortex Flowmeter
DY040-DBMAA1-2D/FF1
MXN88,255.00
Disponible en: 6 Semanas
 
1 1/2" Wafer Style Vortex Flowmeter W/Display
DY040-DBMAA1-2N/FF1
MXN77,535.00
Disponible en: 6 Semanas
 
1 1/2" Wafer Style Vortex Flowmeter
DY040-DBMBA1-2D/FF1
MXN100,005.00
Disponible en: 6 Semanas
 
1 1/2" ANSI class 150 Flange Vortex Flowmeter W/Display
DY040-DBMBA1-2N/FF1
MXN88,990.00
Disponible en: 6 Semanas
 
1 1/2" ANSI class 150 Flange Vortex Flowmeter
DY050-DBMAA1-2D/FF1
MXN89,285.00
Disponible en: 6 Semanas
 
2" Wafer Style Vortex Flowmeter W/Display
DY050-DBMAA1-2N/FF1
MXN76,950.00
Disponible en: 6 Semanas
 
2" Wafer Style Vortex Flowmeter
DY050-DBMBA1-2D/FF1
MXN102,500.00
Disponible en: 6 Semanas
 
2" ANSI class 150 Flange Vortex Flowmeter W/Display
DY050-DBMBA1-2N/FF1
MXN90,020.00
Disponible en: 6 Semanas
 
2" ANSI class 150 Flange Vortex Flowmeter
DY080-DBMAA1-2D/FF1
MXN96,215.00
Disponible en: 6 Semanas
 
3" Wafer Style Vortex Flowmeter W/Display
DY080-DBMAA1-2N/FF1
MXN82,530.00
Disponible en: 6 Semanas
 
3" Wafer Style Vortex Flowmeter
DY080-DBMBA1-2D/FF1
MXN121,300.00
Disponible en: 6 Semanas
 
3" ANSI class 150 Flange Vortex Flowmeter W/Display
DY080-DBMBA1-2N/FF1
MXN108,815.00
Disponible en: 6 Semanas
 
3" ANSI class 150 Flange Vortex Flowmeter
DY100-DBMAA1-2D/FF1
MXN94,425.00
Disponible en: 6 Semanas
 
4" Wafer Style Vortex Flowmeter W/Display
DY100-DBMAA1-2N/FF1
MXN121,300.00
Disponible en: 6 Semanas
 
4" Wafer Style Vortex Flowmeter
DY100-DBMBA1-2D/FF1
MXN133,780.00
Disponible en: 6 Semanas
 
4" ANSI class 150 Flange Vortex Flowmeter W/Display
DY100-DBMBA1-2N/FF1
MXN107,055.00
Disponible en: 6 Semanas
 
4" ANSI class 150 Flange Vortex Flowmeter
DY150-DBMBA1-2D/FF1
MXN162,270.00
Disponible en: 6 Semanas
 
6" ANSI class 150 Flange Vortex Flowmeter W/Display
DY150-DBMBA1-2N/FF1
MXN149,785.00
Disponible en: 6 Semanas
 
6" ANSI class 150 Flange Vortex Flowmeter
DY200-DBMBA1-2D/FF1
MXN242,010.00
Disponible en: 6 Semanas
 
8" ANSI class 150 Flange Vortex Flowmeter W/Display
DY200-DBMBA1-2N/FF1
MXN229,525.00
Disponible en: 6 Semanas
 
8" ANSI class 150 Flange Vortex Flowmeter
DY250-DBLBA1-2D/FF1
MXN415,585.00
Disponible en: 6 Semanas
 
10" ANSI class 150 Flange Vortex Flowmeter W/Display
DY250-DBLBA1-2N/FF1
MXN403,545.00
Disponible en: 6 Semanas
 
10" ANSI class 150 Flange Vortex Flowmeter
DY300-DBLBA1-2D/FF1
MXN508,100.00
Disponible en: 6 Semanas
 
12" ANSI class 150 Flange Vortex Flowmeter W/Display
DY300-DBLBA1-2N/FF1
MXN495,470.00
Disponible en: 6 Semanas
 
12" ANSI class 150 Flange Vortex Flowmeter
Accessories
DYC-1-CF
MXN11,555.00
Disponible en: 6 Semanas
 
100 Foot Cable
DYC-1-1F
MXN3,540.00
Disponible en: 6 Semanas
 
10 Foot Cable
DYC-1-3F
MXN5,235.00
Disponible en: 6 Semanas
 
30 Foot Cable
DYC-1-5F
MXN6,960.00
Disponible en: 6 Semanas
 
50 Foot Cable
DYC-1-7F
MXN9,225.00
Disponible en: 6 Semanas
 
70 Foot Cable
DYA-D2N
MXN30,425.00
Disponible en: 6 Semanas
 
Integral to Remote Electronics
DYA-D2D
MXN42,060.00
Disponible en: 6 Semanas
 
Integral to Remote Electronics Display
Todas las cantidades que se muestran en MXN
Nota: Comes with complete operators manual.

300 lb flange mount are available at an additional cost, Consult Flow Engineering for price.

For units with remote electronics, add suffix "-R" to the model number; no additional cost. **Units with remote electronics require a mounting kit and cable from the Accessories list.

For units designed for high temperature applications, add suffix "-HT" to the model number; Consult Flow Engineering for price.

For NIST calibration, add suffix "-NIST" to the model number; add $350 to the price.

A display is required to access pulse output programmability.


(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)


We noticed you are from the US. Visit your local site for regional offers and live support.