En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

Fine Diameter Thermocouple (0.01 in. - 0.04 in.) Transition Junction TC Probes with Lead Wire

(*)MTSS Series in Fine Diameter

Fine Diameter Thermocouple Transition Junction Probes with PFA Insulated Lead Wire | (*)MTSS  Series in Fine Diameter

MXN2,070.00 KMTSS-040U-12

  • Fine-Diameter Probes as Small as 0.25 mm (0.10 in.)
  • Probes are Available in E, J, K, N, and T Calibrations
  • 304 SS and Inconel® 600. Also available with Super Omegaclad® XL Sheath!
  • 1m (40 in.) Stripped PFA-Insulated Lead Wire Rated to 260° C (500°F)
  • Spring Strain Relief Prevents "Pinching" of the Wire
  • Manufactured with OMEGACLAD™ Compacted Mineral Insulation Cable for Long-Lasting, Low-Drift Performance in Harsh Conditions
Termopares - Ver Productos Relacionados

Descripción

Calibration
ANSI Code
Sheath Material Sheath Dia.
mm (in.)
Upper Temp. Limits
T/C Junct.
°C (°F)
Model Number
(See Notes Below)
K
CHR-
AL
304 SS 0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.0 (0.040)
260 (500)
371 (700)
371 (700)
371 (700)
KMTSS-010(*)-(**)
KMTSS-020(*)-(**)
KMTSS-032(*)-(**)
KMTSS-040(*)-(**)
Inconel®
600
0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.0 (0.040)
260 (500)
371 (700)
371 (700)
371 (700)
KMTIN-010(*)-(**)
KMTIN-020(*)-(**)
KMTIN-032(*)-(**)
KMTIN-040(*)-(**)
Super
OMEGACLAD™
XL
0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.0 (0.040)
316 (600)
427 (800)
815 (1500)
815 (1500)
KMTXL-010(*)-(**)
KMTXL-020(*)-(**)
KMTXL-032(*)-(**)
KMTXL-040(*)-(**)
J
Iron-
Constantan
304 SS 0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.0 (0.040)
204 (400)
260 (500)
260 (500)
260 (500)
JMTSS-010(*)-(**)
JMTSS-020(*)-(**)
JMTSS-032(*)-(**)
JMTSS-040(*)-(**)
T
Copper-
Constantan
304 SS 0.50 (0.020)
0.80 (0.032)
1.0 (0.040)
260 (500)
260 (500)
260 (500)
TMTSS-020(*)-(**)
TMTSS-032(*)-(**)
TMTSS-040(*)-(**)
Notes: *Specify Junction: (G)rounded, (E)xposed or (U)ngrounded.
**Specify length in inches: 6 for 150 mm (6 in.), 12 for 300 mm (12 in.), or 18 for 450 mm (18 in.).
Super OMEGACLAD™ XL probes (highlighted in yellow) are also available in N calibration; substitute NMTXL for KMTXL in Model Number. 304 SS and Inconel® 600 probes are also available in Type E calibration. See ordering examples below.

View the Thermocouple Accuracy and Color Code charts
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
  
KMTSS-040G-12
MXN1,920.00
Disponible en: 3 Semanas
 
Type K Fine Dia. Transition Junction Probe with 1.0 mm (0.04 in.) dia 304 SS sheath, 300 mm (12 in.) long; Grounded Junction
  
TMTIN-040U-6
MXN1,850.00
Disponible en: 3 Semanas
 
Type T Fine Dia. Transition Junction Probe with 1.0 mm (0.04 in.) dia Inconel® sheath, 150 mm (6 in.) long; Ungrounded Junction
  
EMTSS-040G-12
MXN1,905.00
Disponible en: Disponible
 
Type E Fine Dia. Transition Junction Probe with 1.0 mm (0.04 in.) dia 304 SS sheath, 300 mm (12 in.) long; Grounded Junction
compatible meters
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDPI8
DPI8
MXN10,975.00
Disponible en: 6 Semanas
 
thermocouple meter
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloCNI833
CNI833
MXN14,475.00
Disponible en: 6 Semanas
 
Thermocouple controller
Todas las cantidades que se muestran en MXN
Nota: Additional PFA Lead wire is available at $1 per ft (300 mm). Additional probe lengths are also available; contact Sales.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ejemplo de pedido: (1) KMTIN-040G-12 Type K Fine Diameter Probe with 1 mm (0.04 in.) sheath diameter and 300 mm (12 in.) length; Inconel® 600 sheath houses Grounded thermocouple junction, MXN1,920.00  plus (1) KMTIN-040G-12 Type K Fine Diameter Probe with 1 mm (0.04 in.) sheath diameter and 300 mm (12 in.) length; Inconel® 600 sheath houses Grounded thermocouple junction, MXN1,920.00, MXN1,920.00 + 1,920.00 = MXN3,840.00

Generador de Número de Parte

Construya su Número de Parte Abajo
Opciónes de Descripción:


(1) Thermocouple Type seleccionar de:
E para Type E
K para Type K
J para Type J
T para Type T
N para Type N

(2) Sheath Material seleccionar de:
SS para 304 SS
IN para Inconel® 600
XL para Super OMEGACLAD™ XL

(3) Sheath Diameter seleccionar de:
010 para 0.01 in. (0.25 mm)
020 para 0.02 in. (0.5 mm)
032 para 0.032 in. (0.8 mm)
040 para 0.04 in. (1.0 mm)

(4) Junction Type seleccionar de:
G para Grounded
E para Exposed
U para Ungrounded

(5) Sheath Length seleccionar de:
6 para 6 in. (150 mm)
12 para 12 in. (300 mm)
18 para 18 in. (450 mm)
CUSTOM para custom length in inches(whole numbers only up to 120 inches max)
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos
We noticed you are from the US. Visit your local site for regional offers and live support.