Thermocouple Probe - Molded Transition Joint Probes with PFA Insulated Lead Wire

(*)TSS Series

^MXN2,005.00 KTXL-14U-12

Probes Molded in House to ensure Quality and Performance
304SS and Inconel^® 600 Sheaths
1 m (40 in.) PFA-Insulated Lead Wire with Stripped Leads
Manufactureed with OMEGACLAD™ Compacted Mineral Insulation Cable for Long-Lasting, Low-Drift Performance
Lead and Transition Rated to 260°C (500°F)

Termopares - Ver Productos Relacionados

Descripción

For long life, drift-free operation, choose Super OMEGACLAD™ XL mineral insulated thermocouple cable and our rugged transition joint probes, which are available in Type K and N calibrations.

Calibration ANSI Code	Sheath Materials	Sheath Dia. mm (in.)	T/C Junction Upper Temp. °C (°F)	Model Number (See notes, below)
K Cromega®- AL	304SS	1.59 (1/16) 3.18 (1/8) 4.78 (3/16) 6.35 (1/4)	899 (1650) 899 (1650) 899 (1650) 899 (1650)	KTSS-116()-() KTSS-18()-(*) KTSS-316()-(*) KTSS-14()-(**)
	Inconel^® 600	1.59 (1/16) 3.18 (1/8) 4.78 (3/16) 6.35 (1/4)	921 (1690) 1071 (1960) 1149 (2100) 1149 (2100)	KTIN-116()-() KTIN-18()-(*) KTIN-316()-(*) KTIN-14()-(**)
	Super OMEGACLAD™ XL	1.59 (1/16) 3.18 (1/8) 4.78 (3/16) 6.35 (1/4)	1038 (1900) 1149 (2100) 1204 (2200) 1204 (2200)	KTXL-116()-() KTXL-18()-(*) KTXL-316()-(*) KTXL-14()-(**)
J Iron- Constantan	304SS	1.59 (1/16) 3.18 (1/8) 4.78 (3/16) 6.35 (1/4)	441 (825) 521 (970) 621 (1150) 721 (1330)	JTSS-116()-() JTSS-18()-(*) JTSS-316()-(*) JTSS-14()-(**)
T Copper- Constantan	304SS	1.59 (1/16) 3.18 (1/8) 4.78 (3/16) 6.35 (1/4)	260 (500) 316 (600) 371 (700) 371 (700)	TTSS-116()-() TTSS-18()-(*) TTSS-316()-(*) TTSS-14()-(**)

Notes: *Specify Junction: (G)rounded, (E)xposed or or (U)ngrounded.
**Specify length in inches: 6 for 150 mm (6 in.), 12 for 300 mm (12 in.), or 18 for 450 mm (18 in.).
Super OMEGACLAD™ XL probes (highlighted in yellow) are also available in N calibration; substitute NT for KT in Model Number. Some Type E devices are also available. See ordering examples below and contact Sales for moe info.

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

KTXL-116U-12

MXN1,740.00

Disponible en: 3 Semanas

Type K Molded Transition Joint Probe with Super OMEGACLAD™ XL 1/16 in. (1.5 mm) dia. sheath, ungrounded junction, 12 in. (300 mm) length.

KTSS-316G-12

MXN1,235.00

Disponible en: 3 Semanas

Type K Molded Transition Joint Probe with 304 SS 3/16 in. (4.5 mm) dia. sheath, ungrounded junction, 12 in. (300 mm) length.

KTIN-14U-12

MXN1,400.00

Disponible en: Disponible

Type K Molded Transition Joint Probe with Inconel^® 1/4 in. (6 mm) dia. sheath, ungrounded junction, 12 in. (300 mm) length.

JTSS-18G-12

MXN1,345.00

Disponible en: 3 Semanas

Type J Molded Transition Joint Probe with 304SS 1/8 in. (3 mm) dia. sheath, ungrounded junction, 12 in. (300 mm) length.

ETSS-116U-12

MXN1,485.00

Disponible en: 3 Semanas

Type E Molded Transition Joint Probe with 304SS 1/16 in. (1.5 mm) dia. sheath, ungrounded junction, 12 in. (300 mm) length.

TTSS-14U-18

MXN1,435.00

Disponible en: 3 Semanas

Type T Molded Transition Joint Probe with 304SS 1/4 in. (6 mm) dia. sheath, ungrounded junction, 18 in. (450 mm) length.

Ordenar Por Número de Parte

Número de parte

Cant.

Número de parte

Cant.

Todas las cantidades que se muestran en MXN
Nota: For extended lead wire beyond 1 m, add $1 per foot (300 mm). Contact Sales or see the Spec Sheet for prices on additional lengths of MI cable.
Prices for 6 and 12 in. (150 and 300 mm) probes are the same.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)

Generador de Número de Parte

Construya su Número de Parte Abajo

(1)	(2)		(3)	(4)		(5)
		-			-

Opciónes de Descripción:

(1) Thermocouple Type seleccionar de:
ET para Type E
KT para Type K
JT para Type J
TT para Type T
NT para Type N

(2) Sheath Material seleccionar de:
SS para 304 Stainless Steel
IN para Inconel® 600
XL para Super OMEGACLAD™ XL

(3) Sheath Diameter seleccionar de:
116 para 1/16 in. (1.5 mm)
18 para 1/8 in. (3 mm)
316 para 3/16 in. (4.5 mm)
14 para 1/4 in. (6 mm)

(4) Junction Type seleccionar de:
U para Ungrounded
G para Grounded
E para Exposed

(5) Sheath Length seleccionar de:
6 para 6 in. (150 mm)
12 para 12 in. (300 mm)
18 para 18 in. (450 mm)

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos