LVDT
Economical AC Displacement Transducers

LD200

Ver Todas los Modelos Abajo

Low Cost - High Linearity
Rugged Construction for Machine Tools and Vehicles
Large Core Clearance for Easy Installation
Compatible with Standard AC LVDT Instruments
Cores Are Reversible and Interchangeable
Applications:
Proprotional Actuators
Robotic Automation
Linear Servo Actuator
Industrial Automation Controls
Motion Control

Transductores de proximidad y desplazamiento - Ver Productos Relacionados

Descripción

The LD200 Series ac powered LVDT transducers provide an economically priced range of displacement sensors that feature rugged construction and high performance. The series covers a broad range of measurements from 1.25 to 10 mm (0.05 to 0.40 inches). Use these transducers where high resolution and repeatability are important. The coils are wound on a rugged bobbin housed in a stainless steel case. Its epoxy bonded construction makes the device suitable for operation in applications with wet or oily environments or where high levels of mechanical stress (vibration, shock, etc.) are encountered. The armature assembly provides friction-free movement within the sensor due to the large radial clearance of the bore. These transducers offer excellent linearity, low levels of residual voltage and good temperature coefficients, making them ideal for most industrial or general purpose displacement measurement applications.

SPECIFICATIONS

ELECTRICAL
Excitation: 1 to 10 Vrms
Excitation Frequency: 1 to 10 kHz
Energizing Current: <40 mA
Frequency Response: 10% of excitation frequency
Zero Offset: 0.5% FS
Operating Temperature: -55 to 150°C (-67 to 302°F)
Compensated Temperature: -55 to 150°C (-67 to 302°F)
Thermal Effects: Zero: 0.025%/°C Sensitivity: 0.020%/°F
Electrical Termination: 0.3 m (12") leads

MECHANICAL
Core Mass:
LD200-1.25: 3.7 g (0.13 oz)
LD200-2.5: 6.2 g (0.22 oz)
LD200-5: 9.1 g (0.32 oz)
LD200-7.5: 11.3 g (0.40 oz)
LD200-10: 14.2 g (0.50 oz)
Core Thread: 6-40 UNF
Core Material: NiFe - Radio Metal 50
Radial Core Clearance: 1.6 mm (0.062")
Case Material: 400 Series Stainless Steel
Case Weight:
LD200-1.25: 33 g (1.16 oz)
LD200-2.5: 43 g (1.52 oz)
LD200-5: 48 g (1.73 oz)
LD200-7.5: 71 g (2.50 oz)
LD200-10: 74 g (2.61 oz)

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

LD200-1.25

Consultar Ventas

Disponible en:

Economical LVDT with +/- 1.25 mm stroke

LD200-2.5

Consultar Ventas

Disponible en:

Economical LVDT with +/- 2.5 mm stroke

LD200-5