Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Fuera de México:+52 (81) 8335-3774

Clean Water Immersion Heater 1¼" NPT Fitting

MT-1 Series

Clean Water Immersion Heaters | MT-1 Series

Clean Water Immersion Heaters

MXN5,930.00 MT-112A/240V

RoHS
  • 1¼" NPT Brass Screw Plug
  • 120 V and 240V, 1 Phase
  • General Purpose Models NEMA-1 Rated and UL Listed
  • Copper Sheath, Ideal for Clean Water Applications
Calentadores de inmersión - Ver Productos Relacionados

Descripción

The MT-1 series immersion heater is ideally suited for clean water requirements. Models are available with a general purpose terminal enclosure1 or a rugged moisture resistant explosion resistant terminal enclosure.

Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Section P for our complete selection of process controllers.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.



MT-1 Series
E1 General Purpose Encl.1
Model No.
E2 Explos. Res./ Moist Res Encl.2
Model No.
kW Phase W/in2 No.
Elem.
Dim. B
in (cm)
MT-160A/*MT-160E2/*0.615316 1/8 (16)
MT-175A/*MT-175E2/*0.7516516 1/8 (16)
MT-110A/*MT-110E2/*118616 1/8 (16)
MT-110-3A/*MT-110-3E2/*114326 1/8 (16)
MT-112A/*MT-112E2/*1.215326 1/8 (16)
MT-115A/*MT-115E2/*1.516526 1/8 (16)
MT-120A/*MT-120E2/*218626 1/8 (16)
/* Designate voltage, insert 120 for 120 VAC or 240 for 240 VAC. Higher wattages available - contact OMEGALUX.
1. Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2. Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
RoHS
Descripción
Quick Ship
MT-112A/240V
MXN5,930.00
Disponible en: 5 Semanas
RoHS
1.2 kW heater powered by 240 VAC and NEMA-1 general purpose enclosure
Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo
Opciónes de Descripción:


(1) kW seleccionar de:
60 para 0.6 kW
75 para 0.75 kW
10 para 1 kW
10-3 para 1 kW (MT-110-3A & MT-110-3E2 only)
12 para 1.2 kW
15 para 1.5 kW
20 para 2 kW

(2) Enclosure seleccionar de:
A para General Purpose Enclosure
E2 para E2 Moisture Tight Explosion Resistant Enclosure

(3) Voltage seleccionar de:
120V para 120 Vac
240V para 240 Vac
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos