LIGHTWEIGHT OIL IMMERSION HEATER With 2 Element Design With 2 Inch NPT Steel Screw Plug

MTO-2 Series

LIGHTWEIGHT OIL IMMERSION HEATER

^MXN14,270.00 MTO-215A/120V

HACER PEDIDO

Rugged Steel Sheath for Use with Lightweight Oils
1.5 to 6 kW
120 280, 240 or 480V. 1 Phase
General Purpose1 NEMA-1 Rated and UL Listed Enclosure or Moisture Resistant/ Explosion Enclosure2

Calentadores de inmersión - Ver Productos Relacionados

Descripción

Please Note: The immersion heater should be used with an approved temperature control device to assure safe operation. See Temperature Section for our selection of process controllers.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

kW	W/in2	No. Htg. Elem.	Dim. B in (cm)	E1 General Purpose Enclosure¹		E2 Explos. /Moist Res. Encl.²
kW	W/in2	No. Htg. Elem.	Dim. B in (cm)	Model No.	Wt. Ib (kg)	Model No.	Wt. Ib (kg)
1.5	24	2	11 3/4(30)	MTO-215A/*	3 (1)	MTO-215E2/*	6 (3)
2	24	2	17 3/4 (45)	MTO-220A/*	4 (2)	MTO-220E2/*	7 (3)
2.5	26	2	19 5/8 (9)	MTO-225A/*	4 (2)	MTO-225E2/*	7 (3)
3	23	2	24 7/8 (63)	MTO-230A/*	4 (2)	MTO-230E2/*	7 (3)
4	23	2	32 3/4 (83)	MTO-240A/*	6 (3)	MTO-240E2/*	8 (4)
5	23	2	40 1/4 (102)	MTO-250A/*	7 (3)	MTO-250E2/*	8 (4)
6	23	2	47 3/4 (121)	MTO-260A/**	7 (3)	MTO-260E2/**	9 (4)

/*Designate voltage, i.e., insert 120 for 120 Vac, 208 for 208 VAC, 240 for 240 Vac, or 480 for 480 Vac.
//* Designate voltage, ie., insert 208 for 208 Vac, 240 for 240 Vac, or 480 for 480 Vac.
1 Heaters with General Purpose Enclosures are UL recognized and CSA Certified.
2 Heaters with Moisture Resistant/Explosion Resistant Enclosures are CSA NRTL/C Certified.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

MTO-215A/120V

MXN14,270.00

Disponible en: 5 Semanas

Heater, 1.5 kW, 120 V, E1 general purpose enclosure

MTO-225A/208V

MXN17,550.00

Disponible en: 5 Semanas

Heater, 2.5 kW, 208 V, E1 general purpose enclosure

Ordenar Por Número de Parte

Número de parte

Cant.

Número de parte

Cant.

Todas las cantidades que se muestran en MXN
Nota: Caution: Explosion resistant type E2 construction refers to heater design features which provide explosion resisting containment of electrical wiring according to National Electric Code. Abnormal application or use of heaters which in excessive temperatures can create hazardous conditions which can lead to fire
Ejemplo de pedido: (1) MTO-215A/240V 1.5 kW heater powered by 240 Vac, MXN14,365.00

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)	(2)		(3)
MTO-2			/

Opciónes de Descripción:

(1) Wattage seleccionar de:
15 para 1.5 kW
20 para 2 kW
25 para 2.5 kW
30 para 3 kW
40 para 4 kW
50 para 5 kW
60 para 6 kW

(2) Enclosure seleccionar de:
A para General Purpose Enclosure
E2 para Moisture Resistant/Explosion Resistant Enclosures

(3) Voltage seleccionar de:
120V para 120 V
208V para 208 V
240V para 240 V
480V para 480 V

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos