Carrito de Compra  |  Contacto  |  Ayuda  |  Correo electrónico  | 
En México: 01800-953-00-93
Fuera de México:+52 (81) 8335-3774

Screw Plug Immersion Heaters for Process Water Applications

MTS-1 Series

Immersion Heaters for Process Water Applications | MTS-1 Series

Immersion Heaters for Process Water Applications

MXN16,000.00 MTS-110-3/120V

RoHS
  • 1 ¼" NPT Stainless Steel Passivated Screw Plug
  • Stainless Steel Passivated Elements
  • High Watt Density (43 to 86 W/in2)
  • 1 to 2 kW
  • Without Thermostat
  • 120 and 240 Volt, Single Phase
  • General Purpose or Moisture-Resistant/ Explosion-Resistant Terminal Enclosure
Calentadores de inmersión - Ver Productos Relacionados

Descripción

Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Controller Section for our selection of process controllers

SPECIFICATIONS
Wattage: 1 to 2 kW
Power: 120 and 240 V, 1 phase
Watt Density: 43 to 86 W/in2
Screw Plug: 1¼ NPT stainless steel passivated screw plug
Enclosures: E1 general purpose, NEMA 1 (IP00) rated, or type E2 moistureresistant/ explosion-resistant enclosure2.



kW Volts W/in2 No. Htg.
Elem.
E1 General Purpose Enclosure1 E2 Moisture Resis/Explosion Resis.2
Dim. B
cm (in)
Model No. Wt.kg (lb) Model No. Wt.kg (lb)
1 120 43 2 15.5 (6 1/8) MTS-110-3/* 0.9 (2) MTS-110-3E2/* 2.3 (5)
1 240 43 2 15.5 (6 1/8) MTS-110-3/* 0.9 (2) MTS-110-3E2/* 2.3 (5)
1.2 120 53 2 15.5 (6 1/8) MTS-112/* 0.9 (2) MTS-112E2/* 2.3 (5)
1.2 240 53 2 15.5 (6 1/8) MTS-112/* 0.9 (2) MTS-112E2/* 2.3 (5)
1.5 120 65 2 15.5 (6 1/8) MTS-115/* 0.9 (2) MTS-115E2/* 2.3 (5)
1.5 240 65 2 15.5 (6 1/8) MTS-115/* 0.9 (2) MTS-115E2/* 2.3 (5)
2 120 86 2 15.5 (6 1/8) MTS-120/* 0.9 (2) MTS-120E2/* 2.3 (5)
2 240 86 2 15.5 (6 1/8) MTS-120/* 0.9 (2) MTS-120E2/* 2.3 (5)
* Designate voltage, i.e., "120" for 120 Vac or "240" for 240 Vac.
1 Heaters with general purpose enclosures are UL Listed and CSA certified.
2 Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.

Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
RoHS
Descripción
E1 General Purpose Enclosure1
Heaters with general purpose enclosures are UL Listed and CSA certified.
Quick Ship
MTS-110-3E2/120
MXN23,795.00
Disponible en: 5 Semanas
RoHS
1 kW/120 VAC/43 W/in^2
Quick Ship
MTS-110-3/120V
MXN16,000.00
Disponible en: 5 Semanas
RoHS
1 kW/120 VAC/43 W/in^2
Quick Ship
MTS-110-3/240V
Consultar Ventas  
Disponible en: 
 
RoHS
1 kW/240 VAC/43 W/in^2
Quick Ship
MTS-120/120
MXN17,115.00
Disponible en: 5 Semanas
RoHS
2 kW/120 VAC/86 W/in^2
Quick Ship
MTS-120/240
MXN17,115.00
Disponible en: 5 Semanas
RoHS
2 kW/240 VAC/83 W/in^2
E2 Moisture Resis/Explosion Resis.2
Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
Quick Ship
MTS-110-3E2/120
MXN23,795.00
Disponible en: 5 Semanas
RoHS
1 kW/120 VAC/43 W/in^2
Quick Ship
MTS-110-3E2/240
Consultar Ventas  
Disponible en: 
 
RoHS
1 kW/240 VAC/43 W/in^2

Ordenar Por Número de Parte

Número de parte
Cant.
Número de parte
Cant.


Todas las cantidades que se muestran en MXN
Ejemplo de pedido: (1) MTS-120/240 2 kW heater powered by 240 Vac, MXN17,115.00