Molten Metal Ceramic Sheath Thermocouple

NEP-TX Series

^MXN47,575.00 NEP-TX-K-PTRS-1628-475

HACER PEDIDO

Up to 1250°C (2282°F) Temperature Rating
For Use in Molten Non-Ferrous Metals
Connection Head with Terminal Block
Custom Probe Lengths Available
Available in Dual Element
High Temperature Thermal Shock Resistance
Corrosion Resistance
1¼ NPT Mounting Thread Standard

Termopares - Ver Productos Relacionados

Descripción

OMEGATITE™ 650 is the ceramic sheath which is an alloy of silicon nitride and aluminum oxide. This superior refractory material has the combined properties of silicon nitride (high strength, hardness, fracture toughness, and low thermal expansion) and aluminum oxide (corrosion resistance, chemically inert, high temperature capabilities, and oxidation resistance). Not recommended for caustic solutions and hydrofluoric acid.

Most refractory products can be used only in high temperature applications where one or two of the following properties are required: thermal shock resistant, mechanical strength, corrosion resistance, abrasion resistance or electrical insulation. OMEGATITE™ 650 combines all these properties in one refractory material. Preheating of the process is not necessary.

OMEGATITE™ 650 is uniquely qualified for non-ferrous molten metal applications and high wear or high impact environments up to 1250°C (2282°F).

OMEGATITE™ 650 is non-wetting for most non-ferrous metals. It is gas tight, chemically inert, resistant to corrosion and metal attack, and features high strength, hardness, and thermal shock resistance.

OMEGATITE™ 650 thermocouple sheaths are used extensively for continuous measurements in nonferrous metals. In molten aluminum, OMEGATITE™ 650 is thermally shock resistant, nonwetting, does not contaminate the melt, provides continuous, reliable temperature measurement, and is resistant to degradation even in aggressive aluminum lithium alloys.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

NEP-TX-K-PTRS-1628-475

MXN47,575.00

Disponible en: 3 Semanas

Type K Probe, 475mm (18.75in.) length, 28mm (1.10 in.) diameter

NEP-TX-N-PTRS-1628-475

Consultar Ventas

Disponible en:

Type N Probe, 475mm (18.75in.) length, 28mm (1.10 in.) diameter

Todas las cantidades que se muestran en MXN
Nota: Ceramic tube packaged separately to avoid breakage during shipping. Shipped unassembled.

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)		(2)	(3)
NEP-TX-		-PTRS-1628-

Opciónes de Descripción:

(1) Select Calibration seleccionar de:
K para Type K
N para Type N

(2) Select Probe Length (in increments of 150mm) seleccionar de:
475 para 475mm (18.75in.) - Standard Length
CUSTOM para Select a custom length in increments of 150mm (6 in.)

(3) -DUAL seleccionar de:
Nada (dejar el campo en blanco) para Standard Configuration
-DUAL para Dual Element

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos