1/8 DIN Digital Potentiometer for Use with AC or DC Motor Drives

OMDC-DP4 Digital Potentiometer

1/8 DIN Digital Potentiometer

^MXN18,620.00 OMDC-DP4

HACER PEDIDO

Microprocessor Based Digital Speed Potentiometer
Connects to Speedpot Input of AC or DC Motor Drives
Output is +/- 10 Vdc or 0-24 Vdc
Large 1/2" LED Display
Industrial Standard 1/8 DIN Mounting Dimensions
NEMA 4X (IP66) Rating
Control Mode Selectable Between Rate and Time
Selectable Jog Function

Transmisores y motores - Ver Productos Relacionados

Descripción

Sample Application: User interface for an industrial conveyor oven where the digital display shows process oven time. The OMDC-DP4 is connected to the existing adjustable-frequency AC drive. The operator can select from 2 preprogrammed time settings or can manually make adjustments using the arrows on the display.

The OMDC-DP4 is a microprocessor based digital speed potentiometer that can directly replace a conventional 3-wire analog speedpot or motorized speedpot for most AC and DC drives. The desired set speed is entered into the large ½" LED display through the convenient front-panel interface, and display units are now programmable for virtually any unit of measure. The OMDC-DP4 is easy to install into industry standard ¹⁄8" DIN cut-out dimensions. The electrically isolated common signal permits direct wiring from the unit terminal block to the drive’s potentiometer terminal points.

Application
The OMDC-DP4 is ideal for new equipment as well as for retrofitting most AC or DC drive systems where precise, repeatable speed setting and digital readout are desired. The OMDC-DP4 is also ideal in applications where high vibration and other environmental factors can cause normal speedpot settings to drift.

SPECIFICATIONS
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50/60 Hz
Output Compatible: Any drive input impedance of 1 kΩ to 10M Ω
Output Support: ±10 Vdc or lower or 0 to 20 Vdc
Dimensions: 115 W x 58 mm H (4.54 x 2.29") bezel; 117 mm D (4.63")

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

OMDC-DP4

MXN18,620.00

Disponible en: 4 Semanas

Digital potentiometer

Todas las cantidades que se muestran en MXN
Nota: Comes complete with operator's manual.
Ejemplo de pedido: (1) OMDC-DP4 Digital potentiometer for use with AC or DC motor drives., MXN18,620.00

Productos Relacionados: