Washdown Stepper Motors for Wet and Dusty Environments

OMHW Series

Washdown Stepper Motors

Ver Todas los Modelos Abajo

HACER PEDIDO

Bipolar IP65-Rated Step Motors
NEMA 23, 24 and 34 Frame Sizes Available
Integral 3 m (10') Shielded Cable with Cable Gland
Sealed Laminations
Front Shaft Seal
200 full steps per revolution (1.8° per step)

Transmisores y motores - Ver Productos Relacionados

Descripción

Is pleased to announce the addition of NEMA size 23, 24 and 34 stepper motors with IP65 ratings for operation in severe environmental conditions. The OMHW series are dust proof and resistant to low pressure water jets, and are ideal for applications in wet factory environments such as the food and beverage industry or outdoor use. Key features include a nickel plated brass cable gland, sealed laminations, and front shaft contact seal. All models have an internal corrosion-resistant film coating as standard. IP65 specifies a product that is dust tight (no ingress of dust; complete protection against contact) and protected against water jets (water projected by a nozzle from any direction shall have no harmful effects).

Important Note About Motor Current vs Drive Current:
When setting the drive current, you should multiply the stepper motor's nameplate current by 1.2. This provides the correct conversion from the motor's full-step nameplate rating to the drive's current setting. If the motor nameplate current is specified as 5 Amps, set the drive current to 6 Amps (5 x 1.2) to achieve full performance.

The OMHW stepper motors are 8-lead motors, offering the flexibility of either series or parallel connection. The motors should be series connected for best torque at low speeds, and parallel connected for best torque at higher speeds.

Motor Wiring --- Parallel Connection (8-lead motors):
Drive A+ = Orange + Black/White
Drive A- = Black + Orange/White
Drive B+ = Red + Yellow/White
Drive B- = Yellow + Red/White

Motor Wiring --- Series Connection (8-lead motors):
Drive A+ = Orange
Drive A- = Black
Drive B+ = Red
Drive B- = Yellow
Connect Orange/White to Black/White (not connected to drive)
Connect Red/White to Yellow/White (not connected to drive)

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

OMHW23-598

MXN9,480.00

Disponible en: 2 Semanas

NEMA 23 step motor, 158 oz-in minimum holding torque, 4.24 A/phase (parallel)

OMHW23-753

MXN10,145.00

Disponible en: Disponible

NEMA 23 step motor, 153 oz-in minimum holding torque, 1.41 A/phase (parallel)

OMHW23-601

MXN11,020.00

Disponible en: 4 Semanas

NEMA 23 step motor, 269 oz-in minimum holding torque, 4.24 A/phase (parallel)

OMHW23-754

MXN11,645.00

Disponible en: Disponible

NEMA 23 step motor, 227 oz-in minimum holding torque, 1.41 A/phase (parallel)

OMHW24-108

MXN15,385.00

Disponible en: Disponible

NEMA 24 step motor, 354 oz-in minimum holding torque, 4.0 A/phase (parallel)

OMHW34-696

MXN20,375.00

Disponible en: 2 Semanas

NEMA 34 step motor, 1062 oz-in minimum holding torque, 4.06 A/phase (parallel)

OMHW34-506

MXN20,585.00

Disponible en: Disponible

NEMA 34 step motor, 1260 oz-in minimum holding torque, 5.6 A/phase (parallel)

Todas las cantidades que se muestran en MXN
Ejemplo de pedido: (1) OMHW23-598 Washdown stepper motor, 158 oz-in minimum holding torque, 4.24 A/phase (parallel), MXN9,480.00

Productos Relacionados: