En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

Ultra Precise RTD Sensors for Industrial Applications

P-M and P-L Series

Ultra Precise RTD Sensors for Industrial Applications | P-M and P-L Series

Ultra Precise RTD Sensors for Industrial Applications

Ver Todas los Modelos Abajo

  • 100 Ohm DIN Platinum RTDs with Class “A”, 1/3 DIN and 1/10 DIN Accuracies
  • Temperature Range Varies with Cable Selection and Accuracy Class (See Description Below).
  • Available in Two Models:
    Standard Closed End Sensor for Immersion Applcations
    Air/Gas Measurement Sensors with Open Ends and Vent Holes.
  • Probes Available in 6mm, 3mm, 1/8" and 1/4" Diameters.
  • 4-Wire Construction in 6 and 3 mm (1/4 and 1/8") Diameters
  • Both Models are Available As Straight Sheaths or With The Followng Mounting Threads: 1/8, 1/4, 3/8 and 1/2NPT, and 6mm, 8mm and 10mm Sizes
Sondas, elementos y asambleas RTD (PT100) - Ver Productos Relacionados

Descripción

Omega's line of Ultra-Precise RTD temperature sensors provide customers with a product that offers sensor accuracies that are far tighter than are available in most standard RTD sensors on the market today. These sensors are manufactured using DIN Platinum RTD elements (temperature coefficient = .00385 ohm/ohm/°C) with Class A, Class 1/3DIN or Class 1/10DIN accuracies. This makes Omega's Ultra-Precise RTDs among the most accurate industrial temperature sensors available.

These sensors are available in two styles:
Type P-M style closed ended immersion sensors for use where the sensors will be immersed in a fluid.
Type P-L style exposed element sensors for use in direct contact with air or gasses for more accurate measurement of these substances.

There are four probe diameters available including 3mm, 6mm, 1/8" and 1/4", with lengths starting at 50mm (2") with a number of standard lengths available (see ordering table below). A variety of mounting threads are available including: 6x1mm, 8x1mm, 10x1mm, 1/8NPT, 1/4NPT, 3/8NPT and 1/2NPT (Note: 6mm mounting threads are not available on 6mm diameter probes).
Please note that 1/8" and 3mm diameter probes without threaded fittings and with "-P", "-PS", "-TS", "-GS" and "-S" cables include a transition fitting at the end of the sheath to accommodate the cable diameter. If a transition fitting is not acceptable, then a type "-T" or "-G" cable must be specified.

Please note that the minimum recommended length for 1/10DIN accuracy probes is 6” for 1/4" (150mm for 6mm) diameter probes, and 4” for 1/8” (100mm for 3mm) diameter probes. This is due to the fact that in order to achieve these accuracies all stem conduction effects in the sensor must be eliminated. Also, please note that in order to lab certify 1/10DIN accuracy RTDs, it may be necessary for the probes to be longer than these lengths depending on the test equipment used to perform the certification. Omega can make these products shorter than the recommended lengths, but we cannot guarantee their performance. For 1/3DIN probes, a minimum length of 4.75" applies for 1/4" (120mm for 6mm) probes and 2.38" for 1/8" (60mm for 3mm) diameter probes.

The ultimate temperature range of the sensor is dependent upon both the element accuracy and cable selection as shown below (the tightest temperature range applies):

Temperature Range Examples:

P-M-A-1/8-6-0-T-3 has a Class A Element = -100 to 450°C, and "T" (PFA) Cable = -100 to 250°C, resulting in a sensor temperature range of -100 TO 250°C.

P-M-1/10-1/4-9-1/2-P-3 has a 1/10DIN Element = 0 to 100°C, and a P (PVC) Cable = -29 to 100°C, resulting in a sensor temperature range of 0 to 100°C.

Accuracy Specifications:
Class A= ±(0.15 + 0.002 |t| )°C From -100 to 450°C
Class 1/3DIN = ±1/3 (0.3 + 0.005 |t| )°C From -50 to 250°C
Class 1/10DIN = ±1/10 (0.3 + 0.005 |t| )°C From 0 to 100°C

Cable Options:
PVC Insulated ("P") and PVC Insulated and Shielded ("PS") Cables -29 to 100°C.
PFA Insulated ("T") and PFA Insulated and Shielded ("TS) Cables: -100 to 250°C.
Fiberglass Insulated ("G") and Fiberglass Insulated and Overbraided ("GS") Cables: -73 to 400°C.
Silicone Insulated ("S") Cables: -50 to 200°C.

Your Ultra-Precise RTD sensor can be combined with a wide variety of equipment and accessories to construct an entire measurement and control system. Select from a wide variety of controllers, panel meters, transmitters, recorders and data loggers to monitor, control and record your process. See the links below to view a sampling of our complimentary products, or call our Customer Service Representatives and Application Engineers for assistance in selecting the right products for your needs.
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
Immersion Sensor Models:
  
P-M-1/10-1/4-4-0-P-3
MXN4,830.00
Disponible en: 6 Semanas
 
Accuracy: 1/10 DIN. Sheath: Closed End, 4" Long 1/4" Diameter, No Threaded Fitting. Leadwire: 3 Feet (1m), PVC Insulated.
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloP-M-1/10-1/8-6-0-P-3
P-M-1/10-1/8-6-0-P-3
MXN5,685.00
Disponible en: Disponible
 
Accuracy: 1/10 DIN. Sheath: Closed End, 6" (150mm) Long 1/8" Diameter, No fitting. Leadwire: 3 Feet (1m), PVC Insulated
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloP-M-1/10-1/4-6-0-P-3
P-M-1/10-1/4-6-0-P-3
MXN5,135.00
Disponible en: 6 Semanas
 
Accuracy: 1/10 DIN. Sheath: Closed End, 6" (150mm) Long 1/4" Diameter, No fitting. Leadwire: 3 Feet (1m), PVC Insulated
  
P-M-1/10-1/4-6-0-P-15
MXN5,750.00
Disponible en: 6 Semanas
 
Accuracy: 1/10 DIN. Sheath: Closed End, 6" (150mm) Long 1/4" Diameter, No fitting. Leadwire: 15 Feet (4.5 meters), PVC Insulated
  
P-M-1/3-1/8-6-0-T-3
MXN4,945.00
Disponible en: Disponible
 
Accuracy: 1/3DIN. Sheath: Closed End, 6" (150mm) Long 1/8" Diameter, No Fitting. Leadwire: 3 Feet (1m), PFA Insulated.
  
P-M-A-1/4-3-1/2-PS-12
MXN4,530.00
Disponible en: 6 Semanas
 
Accuracy: Class “A”. Sheath: Closed End, 6" (150mm) Long 1/4" Diameter, 1/2 NPT Fitting. Leadwire: 12 Feet (3.6 meters), PVC Insulated, Shielded.
  
P-M-A-1/4-6-0-T-3
MXN3,205.00
Disponible en: 6 Semanas
 
Accuracy: Class “A”. Sheath: Closed End, 6" (150mm) Long 1/4" Diameter, No Mounting Fitting. Leadwire: 3 Feet (1m), PFA Insulated.
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloP-M-A-1/4-6-1/2-TS-3
P-M-A-1/4-6-1/2-TS-3
MXN4,890.00
Disponible en: 6 Semanas
 
Accuracy: Class “A”. Sheath: Closed End, 6" (150mm) Long, 1/2 NPT Fitting. Leadwire: 3 Feet (1m), PFA Insulated, Shielded.
  
P-M-A-1/8-6-1/2-TS-5
MXN5,875.00
Disponible en: 6 Semanas
 
Accuracy: Class “A”. Sheath: Closed End, 6" (150mm) Long 1/8" Diameter, 1/2 NPT Mounting Fitting. Leadwire: 5 Feet (1.5 meters), PFA Insulated & Shielded.
Exposed Air/Gas Models
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloP-L-1/10-1/8-6-0-T-3
P-L-1/10-1/8-6-0-T-3
MXN6,450.00
Disponible en: Disponible
 
Accuracy: 1/10 DIN. Sheath: Air Sensor, 6" (150mm) Long 1/8" Diameter, No Mounting Fitting. Leadwire: 3 Feet (1 meter), PFA Insulated Cable
  
P-L-1/10-1/8-6-1/8-T-3
MXN6,905.00
Disponible en: 6 Semanas
 
Accuracy: 1/10 DIN. Sheath: Air Sensor, 6" (150mm) Long 1/8" Diameter, 1/8" NPT Mounting Fitting. Leadwire: 3 Feet (1 meter), PFA Insulated Cable
  
P-L-1/10-1/4-6-0-P-3
MXN5,005.00
Disponible en: 6 Semanas
 
Accuracy: 1/10 DIN. Sheath: Air Sensor, 6" (150mm) Long 1/4" Diameter, No Mounting Fitting. Leadwire: 3 Feet (1 meter), PVC Insulated Cable
  
P-L-A-1/8-6-0-T-3
MXN3,885.00
Disponible en: 6 Semanas
 
Accuracy: Class “A”. Sheath: Air Sensor, 6" (150mm) Long 1/8" Diameter, No Mounting Fitting. Leadwire: 3 Feet (1 meter), PFA Insulated Cable.
  
P-L-A-1/4-6-1/4-T-6
MXN4,555.00
Disponible en: 6 Semanas
 
Accuracy: Class “A”. Sheath: Air Sensor, 6" (150mm) Long 1/4" Diameter, 1/4 NPT Mounting Fitting. Leadwire: 6 Feet (2 meters), PFA Insulated.
  
P-L-A-1/4-6-0-P-3
MXN3,105.00
Disponible en: Disponible
 
Accuracy: Class “A”. Sheath: Air Sensor, 6" (150mm) Long 1/4" Diameter, No Mounting Fitting. Leadwire: 3 Feet (1 meter), PVC Insulated Cable.
Most Popular Accessories
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloHH804U
HH804U
MXN6,510.00
Disponible en: Disponible
 
Precision Handheld Thermometer
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloOM-DAQPRO-5300-UNIV
OM-DAQPRO-5300-UNIV
MXN38,255.00
Disponible en: Disponible
 
Portable Handheld Datalogger
  
OM-CP-RFRTDTEMP2000A
MXN12,210.00
Disponible en: Disponible
 
Precision RTD Recorder and Wireless Transmitter
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloCN1A-RTD
CN1A-RTD
MXN8,245.00
Disponible en: Disponible
 
1/16 DIN On-Off LCD Temperature Controller
  
DRF-RTD-115VAC-0/200C-4/20
Consultar Ventas  
Disponible en: 
 
 
RTD Input Signal Conditioner
Todas las cantidades que se muestran en MXN
Nota: For longer sheath length, change "-6" in model to desired length in inches and add $1 per inch to price when longer than 8". For Silicone Rubber insulated cable, change "-P", "-T" or "-G" to "-S" in the model number and use PFA pricing. For longer cable lengths, change "-3" to desired length in feet and add $0.40/ft for PVC, $0.95/ft for PFA or Silicone Rubber and $1.50/ft for fiberglass. For shielding on PVC, PFA or Fiberglass insulated cables, change "P", "T" or "G" to "PS", "TS" or "GS" and add $0.25 per foot to the price. Mounting threads also available in 1/4 NPT, 3/8 NPT and 1/2 NPT at the same price. 1/8" diameter sensors without threaded fittings and with "P", "PS", "TS", "GS" and "S" cables include a transition fitting at the end of the sheath. For metric diameter probes multiply price/ft adders by 3.28 and round to the nearest $0.10.
Ejemplo de pedido: (1) P-M-1/10-1/4-6-0-P-3 100 Ohm, 1/10 DIN Platinum RTD with a 1/4, MXN5,135.00  plus (1) P-M-1/10-1/4-6-0-P-3 100 Ohm, 1/10 DIN Platinum RTD with a 1/4, MXN5,135.00, MXN5,135.00 + 5,135.00 = MXN10,270.00

Generador de Número de Parte

Construya su Número de Parte Abajo
Opciónes de Descripción:


(1) Probe Type seleccionar de:
M para Closed Ended Immersion Style
L para Open Ended Air/Gas Direct Exposure Style

(2) Sensor Accuracy seleccionar de:
A para Class A
1/3 para Class 1/3DIN
1/10 para Class 1/10DIN

(3) Probe Diameter seleccionar de:
1/8 para 1/8 inch Diameter
1/4 para 1/4 inch Diameter
M30 para 3mm Diameter
M60 para 6mm Diameter (Not valid with M6 Mounting Thread)

(4) Probe Length seleccionar de:
6 para 6 inches Long
9 para 9 inches Long
12 para 12 inches Long
18 para 18 inches Long
24 para 24 inches Long
150 para 150mm Long
225 para 225mm Long
300 para 300mm Long
450 para 450mm Long
600 para 600mm Long

(5) Mounting Thread seleccionar de:
0 para No Mounting Thread
1/8 para 1/8NPT Thread
1/4 para 1/4NPT Thread
3/8 para 3/8NPT Thread
1/2 para 1/2NPT Thread
M6 para 6x1mm Thread
M8 para 8x1mm Thread
M10 para 10x1mm Thread

(6) Cable Construction seleccionar de:
P para PVC Insulated & Jacketed (100°C Max)
T para PFA Insulated & Jacketed (250°C Max)
G para Fiberglass Insulated & Jacketed (400°C Max)
S para Silicone Rubber Insulated and Jacketed (200°C max)
PS para PVC Insulated & Jacketed with Shield (100°C Max)
TS para PFA Insulated & Jacketed w/Shield (250°C Max)
GS para Fiberglass Insulated & Jacketed w/SST Overbraid (400°C Max)

(7) Cable Length seleccionar de:
3 para 3 Foot Standard (Standard Dimensions)
1 para 1 meter Standard (Metric Dimensions)
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos
We noticed you are from the US. Visit your local site for regional offers and live support.