En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

Ready-to-Use Heat Tape with Thermostatic Control - Discontinued

PH1

 | PH1

Ver Todas los Modelos Abajo

  • Fast Delivery
  • 115 Vac Standard Power
  • Built-In Thermostat Turns on at Temperatures Below 4.4°C (40°F) and Turns Off at 15.5°C (60°F)
  • Resistant to Many Chemical Substances
  • Easy to Install/Uninstall
  • Components UL Recognized and CSA Certified
  • Custom Lengths Available
  • APPLICATIONS
  • Freeze Protection and
  • Frozen Pipe Thawing:
  • Water Pipes
  • Dairy and Livestock Facilities
  • Wineries/Breweries

Descripción

The PH1 series has been discontinued. Please see the HTWT101 series as a possible alternative or contact our Temperature Engineering department.

Ready-to-use pipe heaters are made of wire-wound circuits laminated between thin layers of fiberglass-reinforced, high temperature insulation, silicone rubber. Pipe heaters are used to provide freeze protection and frozen pipe thawing in a variety of indoor and outdoor applications.

They are pre-formed in a spiral configuration for easy and quick wrapping/unwrapping around metal pipes. The thermostat end secures to the pipe with Velcro® tape, making installation and deinstallation/re-use also quick and easy. A built-in, surface sensing thermostat maintains the temperature to prevent freezing or condensation along the pipe. The thermostat turns on at temperatures below 4.4°C (40°F) and turns off at 15.5°C (60°F).

Silicone rubber heaters are resistant to temperature extremes, moisture, weathering, radiation, fungus and chemical attack. They also have a high dielectric strength, flexibility, and provide a cost effective heating solution.

Specifications
Material and Construction: Fully vulcanized fiberglass-reinforced silicone rubber encapsulating a nickel alloy or thin foil heating element
Voltage: 115 Vac
Power Density (115V): 2.5W/in2
Operating Temperature Range: Turns on at temperatures below 4.4°C (40°F) and turns off at 15.5°C (60°F)
Resistance Tolerance: ±10%
Thickness: Approximately 32 mm (0.08")
Cord:
    Plug: 2-prong
    Length: 1.8 m (6')
Component Approvals: UL, CSA
High-Potential Dielectric Testing: 1250V
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
PH1-24
Consultar Ventas  
Disponible en: 
 
 
600 mm (24") heat wrap tape with thermostat for pipes
PH1-48
Consultar Ventas  
Disponible en: 
 
 
1.2 m (48") heat wrap tape with thermostat for pipes
PH1-72
Consultar Ventas  
Disponible en: 
 
 
1.8 m (72") heat wrap tape with thermostat for pipes
Todas las cantidades que se muestran en MXN
We noticed you are from the US. Visit your local site for regional offers and live support.