The PHE-9150 series has been discontinued. Please contact our Flow Engineering department.
The pHACT is a Fast Acting pH Sensor, with a built-in differential amplifier and 100Ω Platinum RTD Automatic Temperature Compensation sensor that provides a compensated output compatible with any pH meter. It is an ideal solution for ground loop problems, since it has a built-in solution ground and low impedance output, making the pHACT immune to noise. The PPS molded body has a high chemical resistance. The PHE-9150 series uses a High pH glass formulation, the perfect choice for extreme pH applications, with a triple PTFE junction reference cell. Coupled with the novel Plunger electrode design, this sensor assures low maintenance in most applications. The PHE-9151 is manufactured for low viscosity and in-line use, with a 3 /4 ' or 1' MNPT. It is ideal for the pulp and paper industry, as well as electroplating and petro-chemical applications. The PHE-9153 has 0.5' (12mm) insertion length, while PHE-9151 has 2.3' (59mm) for use in large pipes. PHE-9150/52 are manufactured in such a way that can be used in-line or submersible applications, with a 3 /4 " or 1' MNPT. While the PHE-9150 has only 0.9' (23mm) insertion length, the PHE-9152 offers 2.3' (59mm), to be able to reach into large diameter pipes, or tanks.
For complete product specifications see the Related Links section at the bottom of this page.
Todas las cantidades que se muestran en MXN Nota: Comes complete with electrode care instruction sheet and 4.6 m (15 ft) of cable.
For non standard cable lengths, replace the suffix "15" in the model number with the required length in feet, add $2 per foot to price. (Additional per foot cost applies to the entire cable length.)
For HF/Fluoride resistant electrode, add suffix "-HF" to model number, add $50 to price.
For high temperature reference cell, add suffix "HT" to model number, add $35 to price.