The PR-10 series has been updated with low, high, and extreme temperature ranges; all of the new models will be PR-10(L,H,E)*. The older models have been discontinued.
Omega's RTD probe with insulated lead wire has a shrink-tube strain relief support at the sheath/wire transition to provide wire flexibility and durability. This 316 stainless steel probe is offered in 2-, 3-, or 4-wire configuration. This is available in three temperature ranges covering -200°C to 600°C (-328 to 1112°F) to accommodate your specific temperature needs. Applications for this probe include liquid immersion, slurries and emulsions, granular material measurements, as well as temperature monitoring of heat bars, kilns, and pipes.
Todas las cantidades que se muestran en MXN
Generador de Número de Parte
Construya su Número de Parte Abajo
Opciónes de Descripción:
(1)
RANGE seleccionar de: L para L=LOW (-50 to 250°C) H para H=HIGH (-50 to 450°C) E para E=EXTREME (-200 to 600°C)
(2)
NUMBER OF WIRES seleccionar de: 2 para 2 WIRE 3 para 3 WIRE 4 para 4 WIRE
(3)
OHMS seleccionar de: 100 para 100 OHMS 1000 para 1000 OHMS
(4)
SHEATH DIAMETER seleccionar de: 1/8 para 1/8" DIAMETER 3/16 para 3/16" DIAMETER 1/4 para 1/4" DIAMETER
(5)
SHEATH LENGTH seleccionar de: 2 para 2 INCHES 3 para 3 INCHES 4 para 4 INCHES 6 para 6 INCHES 9 para 9 INCHES 12 para 12 INCHES 18 para 18 INCHES 24 para 24 INCHES
(6)
COLD END TERMINATION seleccionar de: Nada (dejar el campo en blanco) para stripped leads -RDXL6SD-CONN para connector for RDXL6SD datalogger -TA3F para 3-pin DIN connector -TA4F para 4-pin DIN connector -HH804-CONNECTOR para DIN connector for use with HH-804 RTD meter -LUG para Spade Lugs -MTP para 3-pin mini connector -OTP para 3-pin standard connector
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos
We noticed you are from the US. Visit your local site for regional offers and live support.
