Thin Film Cryogenic Pressure Transducer

PX1005

^MXN47,270.00 PX1005L1-1KAV

HACER PEDIDO

High Performance
High Reliability
0.1% Stability for 18 months
Operates from -196 to +149°C (-320 to +300°F)
Exceptional Calibration Stability

Transductores de presión - Ver Productos Relacionados

Descripción

OMEGA’s PX1005 Sputtered Thin Film Pressure Transducer was designed for cryogenic service; it can operate in temperatures from -196°C to +149°C (-320°F to +300°F.) Yet, even in these difficult temperatures, it provides outstanding accuracy, long-term calibration stability and reliability. Static accuracy is ±0.25%, and thermal zero and sensitivity shifts over the compensated range of -196°C to +27°C (-320°F to +80°F) are less than ±0.01%/°F. The all-welded stainless-steel pressure cavity and double-isolated case ensures reliability in the tough environments normal to cryogenic service. OMEGA’s thin film technology makes this premium performance possible. The strain gages are sputter-deposited, forming a molecular bond with the substrate. There is virtually no shift, drift, or creep to cause the transducer’s calibration to change. OMEGA’s PX1005 is available in many standard ranges from 15 psi to 1,000 psi. A calibration record is supplied with every unit.

SPECIFICATIONS Excitation: 10 Vdc
Full Range Output: 30 mV nominal, 26 mV minimum
Residual Unbalance: 0 mV ±5% FSO at zero pressure
Input Resistance: 400 Ω nominal
Output Resistance: 400 Ω nominal
Insulation Resistance: 100 MΩ or greater @ 45 Vdc
Shunt Calibration: Provisions for single-arm, external shunt calibration
Sensing Element: 4-active-arm bridge using sputter-deposited thin-film elements.
Accuracy: Combined linearity, hysteresis and repeatability: ±0.25% FSO, BSL [Note: Performance is determined at 25°C ±1°C (77°F ±2°F), open circuit, rated excitation, unless otherwise specified]
Operating Temp Range: -196 to 149°C (-320 to 300°F)
Compensated Temp Range: -196 to 27°C (-320 to 80°F)
Thermal Effects:
Span: ±0.01% FSO/°F
Zero: ±0.01% FSO/°F
Vibration Sensitivity: At 35 g peak from 10 Hz to 2000 Hz (1/2" D.A.), the output shall not exceed 0.04% FSO/g for 15 psi units decreasing logarithmically to 0.003% FSO/g for 1000 psi units
Natural Frequency: 35 kHz at 1000 psi decreasing logarithmically 5 kHz at 15 psi
Shock: 100 g, 11 ms half sine wave without calibration shift or damage
Humidity: Per MIL-STD-810, method 507.1
Proof Pressure: 200% of rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3 times rated pressure
Wetted Parts: 17-4 PH vacuum melt or 15-5 PH stainless steel
Pressure Fitting: 7/16-20 male per MS33656-4
Mounting Isolation: Case isolation ensures that the sensing element will not be affected by external stresses
Mating Connector: PCS06E-10-6S(SR) (sold separately)
Weight: 145 g (5 oz) maximum

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

PX1005L1-015AV

MXN47,270.00

Disponible en: 8 Semanas

0-15 PSIA cryogenic pressure transducer, with integral electrical connector

PX1005L1-025AV

MXN47,270.00

Disponible en: Disponible

0-25 PSIA cryogenic pressure transducer, with integral electrical connector

PX1005L1-050AV

MXN47,270.00

Disponible en: 8 Semanas

0-50 PSIA cryogenic pressure transducer, with integral electrical connector

PX1005L1-100AV

MXN47,270.00

Disponible en: 8 Semanas

0-100 PSIA cryogenic pressure transducer, with integral electrical connector

PX1005L1-250AV

MXN47,270.00

Disponible en: 8 Semanas

0-250 PSIA cryogenic pressure transducer, with integral electrical connector

PX1005L1-500AV

MXN47,270.00

Disponible en: Disponible

0-500 PSIA cryogenic pressure transducer, with integral electrical connector

PX1005L1-1KAV

MXN47,270.00

Disponible en: 8 Semanas

0-1,000 PSIA cryogenic pressure transducer, with integral electrical connector

Accessories

PCS06E10-6S

MXN4,300.00

Disponible en: 16 Semanas

Mating connector for PX1005 (sold separately)

Todas las cantidades que se muestran en MXN
Nota: Some discoloration of the pressure connection and surrounding area may occure due to the hot/cold calibration of this product.

Ejemplo de pedido: (1) PCS06E10-6S mating connector (sold separately), MXN4,300.00 plus (1) PX1005L1-100AV 0-100 PSIA Cryogenic pressure transducer, with MS33656-4 port and an integral connector, MXN47,270.00, MXN4,300.00 + 47,270.00 = MXN51,570.00

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)	(2)
PX1005L1-

Opciónes de Descripción:

(1) Range (psi) seleccionar de:
015 para 0-15
025 para 0-25
050 para 0-50
100 para 0-100
250 para 0-250
500 para 0-500
1K para 0-1000

(2) Units seleccionar de:
AV para Absolute Model
SV para Sealed Gage Model

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos