En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

Submersible Water Level Transmitter, Measure 0-5 ft to 0-690 ft of Water - Discontinued

PX437-8-9

Submersible Water Level Transmitter, Measure 0-5 ft to 0-690 ft of Water | PX437-8-9

Ver Todas los Modelos Abajo

CE
  • Available with Accuracies of 0.5%, 0.25% and 0.1% of Full Scale
  • Designed for Complete Submersibility
  • Welded 316 Stainless Steel Construction
  • Unique Cable Seal System Insures Water-Tight Integrity
  • High Static Accuracy and Repeatability
  • 100% Computer Tested, Calibrated and Serialized
  • Calibration Sheet Provided
  • Fully Temperature Compensated
  • Moisture Trap Included as Standard Feature

Descripción

Our PX437 is being discontinued. We encourage you to use our newest submersible level transmitter with transient protection, the PX633 . This is a permanent replacement and is the optimal choice to satisfy all of your high demand level measuring applications.



OMEGA’s PX437, PX438 and PX439 Series submersible water level transmitters are designed to meet the rigorous environments of applications including well monitoring, pump tests, lift stations, chemical tank level, ground water and surface water measurement and process control and many others. They provide repeatable, precision depth measurements under the most adverse conditions.These transducers utilize a silicon pressure cell fitted into a stainless steel housing with an integral welded 316 stainless steel barrier diaphragm. The supplied calibration sheet specifies input and output data which reflects the unit’s static accuracy and thermal characteristics. Each transducer is shipped with a moisture trap that prevents moisture from entering the vent tube. Replacement moisture traps are available as accessory items.

SPECIFICATIONS
Excitation: 9 to 30 Vdc, reverse polarity protected
Output: 4 to 20 mA dc, 2 wire, short circuit protected
Input Current: 20 mA max
Zero Offset: ±0.12 mA max
Insulation Resistance: 100 MΩ at 50Vdc
Accuracy: PX437 0.1% FS BFSL, PX438 0.25% FS BFSL, PX439 0.5% FS BFSL (includes linearity, hysteresis and repeatability)
Response Time: 2 ms
Operating Temperature: -10 to 60°C (15 to 140°F)
Compensated Temperature: 0 to 50°C (32 to 120°F)
Combined Thermal Effect: ±0.05% FS/°C (Zero and Span) 0.1% FS/°C for 2 and 5 psig ranges
Proof Pressure: 150%
Burst Pressure: 200%
Wetted Parts: 316 Stainless Steel, acetal, Polyurethane Cable FKM or PFE
Fill Fluid: Silicone oil
Mounting Provisions: Suspended by cable. For turbulent conditions, specify optional mounting clamp Electrical
Connections: Submersible cable terminating in pigtail leads
Cable: Polyurethane jacketed shielded cable with polyethylene vent tube and Kevlar® tension members 198 lb (90 kg) pull strength Conductors are 22 AWG
Weight: 200 g (7 oz) transducer 79 g/m cable (0.8 oz/ft) cable weight

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
0.1% Accuracy Models
PX437-002GI
Consultar Ventas  
Disponible en: 
 
 
0-2 psi, 0.1% accuracy, submersible transmitter with 20 foot cable
PX437-005GI
Consultar Ventas  
Disponible en: 
 
 
0-5 psi, 0.1% accuracy, submersible transmitter with 20 foot cable
PX437-010GI
Consultar Ventas  
Disponible en: 
 
 
0-10 psi, 0.1% accuracy, submersible transmitter with 40 foot cable
PX437-015GI
Consultar Ventas  
Disponible en: 
 
 
0-15 psi, 0.1% accuracy, submersible transmitter with 50 foot cable
PX437-030GI
Consultar Ventas  
Disponible en: 
 
 
0-30 psi, 0.1% accuracy, submersible transmitter with 90 foot cable
0.25% Accuracy Models
PX438-005GI
Consultar Ventas  
Disponible en: 
 
 
0-5 psi, 0.25% accuracy, submersible transmitter with 20 foot cable
PX438-010GI
Consultar Ventas  
Disponible en: 
 
 
0-10 psi, 0.25% accuracy, submersible transmitter with 40 foot cable
PX438-015GI
Consultar Ventas  
Disponible en: 
 
 
0-15 psi, 0.25% accuracy, submersible transmitter with 50 foot cable
PX438-030GI
Consultar Ventas  
Disponible en: 
 
 
0-30 psi, 0.25% accuracy, submersible transmitter with 90 foot cable
0.5% Accuracy Models
PX439-002GI
Consultar Ventas  
Disponible en: 
 
 
0-2 psi, 0.5% accuracy, submersible transmitter with 20 foot cable
PX439-005GI
Consultar Ventas  
Disponible en: 
 
 
0-5 psi, 0.5% accuracy, submersible transmitter with 20 foot cable
PX439-010GI
Consultar Ventas  
Disponible en: 
 
 
0-10 psi, 0.5% accuracy, submersible transmitter with 40 foot cable
PX439-015GI
Consultar Ventas  
Disponible en: 
 
 
0-15 psi, 0.5% accuracy, submersible transmitter with 50 foot cable
PX439-030GI
Consultar Ventas  
Disponible en: 
 
 
0-30 psi, 0.5% accuracy, submersible transmitter with 90 foot cable
PX439-050GI
Consultar Ventas  
Disponible en: 
 
 
0-50 psi, 0.5% accuracy, submersible transmitter with 135 foot cable
PX439-100GI
Consultar Ventas  
Disponible en: 
 
 
0-100 psi, 0.5% accuracy, submersible transmitter with 250 foot cable
PX439-150GI
Consultar Ventas  
Disponible en: 
 
 
0-150 psi, 0.5% accuracy, submersible transmitter with 365 foot cable
PX439-200GI
Consultar Ventas  
Disponible en: 
 
 
0-200 psi, 0.5% accuracy, submersible transmitter with 480 foot cable
PX439-250GI
Consultar Ventas  
Disponible en: 
 
 
0-250 psi, 0.5% accuracy, submersible transmitter with 595 foot cable
PX439-300GI
Consultar Ventas  
Disponible en: 
 
 
0-300 psi, 0.5% accuracy, submersible transmitter with 710 foot cable
ACCESSORIES
PX430-TRAP
Consultar Ventas  
Disponible en: 
 
 
Replacement water vapor trap (1 included with transmitter)
PX430-CLAMP
Consultar Ventas  
Disponible en: 
 
 
Mounting clamp
Todas las cantidades que se muestran en MXN
Nota: (1) To order 0.25% accuracy model specify PX438, for 0.1% accuracy specify PX437. See "Part Number Builder" below for pricing.
(2) For models with 1/4" NPT male pressure fitting add suffix "-NPT" to part number. No extra charge.
(3) For models with additional cable add $1.80 per foot of additional cable

Generador de Número de Parte

Construya su Número de Parte Abajo
Opciónes de Descripción:


(1) Accuracy seleccionar de:
9 para 0.5% Full scale accuracy
8 para 0.25% Full scale accuracy
7 para 0.1% Full scale accuracy

(2) Pressure Range seleccionar de:
002GI para 0-2 psi (0-4.6 feet of water) range
005GI para 0-5 psi (0-11.5 feet of water) range
010GI para 0-10 psi (0-23.1 feet of water) range
015GI para 0-15 psi (0-34.6 feet of water) range
030GI para 0-30 psi (0-69.2 feet of water) range
050GI para 0-50 psi (0-115 feet of water) range
100GI para 0-100 psi (0-230 feet of water) range
150GI para 0-150 psi (0-345 feet of water) range
200GI para 0-200 psi (0-460 feet of water) range
250GI para 0-250 psi (0-575 feet of water) range
300GI para 0-300 psi (0-690 feet of water) range

(3) Fitting seleccionar de:
para No fitting
-NPT para 1/4-18 NPT male fitting
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos
We noticed you are from the US. Visit your local site for regional offers and live support.