Diffused Semiconducter Pressure Transmtter, Metric, 0-1 to 0-25 bar, 4-20 mA Output

PXM6000 Series Metric, Current Output

Ver Todas los Modelos Abajo

High Reliability
Long Term Stability
All Stainless Steel Case
Vacuum Range Available
Built-In Temperature Sensor

Transductores de presión - Ver Productos Relacionados

Descripción

OMEGA’s PXM6000 Series Pressure Transducer fits easily into your application. This low cost transducer is small and light, and mounting requires no bulky structures. The sensor is a small, about 2.5 mm square, silicon chip with four diffused strain gauges, mounted in the stainless steel case. Laser trimmed resistors provide temperature compensation and adjust zero balance and span. The 4-20 mA output easily interfaces with most control and data acquisition systems The PXM6000 uses solid state media isolation for improved reliability. Thin films of chemically inert materials are deposited or grown on the chip surface to provide electrical isolation between the sensor and pressure medium. The sensor is less sensitive to vibration and more dependable in high shock environments because the films add no significant mass. Corrosion resistance is outstanding, and the isolation will remain effective because there is no gel or oil column to deteriorate.

The PXM6000 is also available in standard/Imperial configurations, with MS, NPT or UNF ports, and models from 0-15 to 0-300 psi pressure ranges. Please see the PX6000 for complete details, or contact our Pressure department for more information..

SPECIFICATIONS
Excitation: 10 to 40 Vdc Unregulated
Output: 4-20 mA Adjustable ±10% FSO
Max Loop Resistance:50x(V-10) Ohms, where V = supply voltage (40 Vdc max)
Zero Balance: 4 mA Adjustable ±10% FS
Dielectric Isolation Resistance: 100 MOhms Mminimum at 45 Vdc
Temperature Sensor: Resistance @ 24°C (75°F) 900 to 1500 Ohms
Temperature Coefficient: 8% to 10%. per 55.6°C(100°F)
Accuracy: ± 0.25% FSO for all ranges (Linearity, Hysteresis and Repeatability combined )
Operational Temp Range: -29° to 85°C (-20 ° to 185°F)
Compensated Temp Range: -29° to 85°C (-20° to +185°F)
Thermal Effects:
Span: = ± 0.04% of FSO/°C
Zero: = ± 0.04% of FSO/°C
Vibration Sensitivity: At 20g peak sinusoidal vibration from 10 Hz to 2000 Hz ( 1 /2 " D.A.), the output shall not exceed 0.04% FSO/g for 1 bar range to 0.005% FSO/g for 7 bar and above
Natural Frequency: Greater than 35 kHz for 7 bar and above
Shock: 100g, 11 milliseconds half sine wave without damage
Proof Pressure: 2.0 times rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3.0 times rated pressure for pressure ranges below 14 bar, or 2.5 times rated pressure for pressure ranges above 14 bar will not cause rupture of the pressure sensor
Wetted Parts: 316 Stainless Steel, Silicon, pyrex glass, epoxy, Kovar
Electrical Connection: Style "0" = 0.6 m (2 ft) cable
Style "1" = PT1H-10-6P connector
Style "6" = micro DIN Connector
Pressure Port: G 1/4 Male (std)
Optional: G 1/4 Female, G 1/8 Male or Female
Weight: 170 g (6 oz.)
Mating Connector: Style "1" = PT06F10-6S (not inlcuded)
Style "6" Micro DIN mating connector included

For special options consult Sales or Pressure Engineering.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

PXM6000MC6-001BARGI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-1 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-1.60BARGI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-1.6 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-004BARGI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-4 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-006BARGI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-6 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-010BARGI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-10 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-016BARGI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-16 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-025BARGI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-25 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-001BARAI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-1 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-1.60BARAI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-1.6 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-004BARAI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-4 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-006BARAI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-6 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-010BARAI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-10 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-016BARAI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-16 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

PXM6000MC6-025BARAI

Consultar Ventas

Disponible en:

Diffused semiconductor transducer, 0-25 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 4-20 mA output

Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)	(2)		(3)		(4)	(5)
PXM6000			-		BAR

Opciónes de Descripción:

(1) Pressure Port seleccionar de:
MA para G 1/8 male
MB para G 1/8 female
MC para G 1/4 male
MD para G 1/4 female

(2) Electrical Connection seleccionar de:
0 para 0.6 meter shielded cable
1 para PT1H-10-6P connector or equivalent (mating connector sold separately)
3 para 4 pin solder eyelet(no temp. sensor)
6 para micro DIN connector (mating connector included/no temp sensor)

(3) Pressure Range (Bar) seleccionar de:
001 para 0 to 1 Bar
1.60 para 0 to 1.6 Bar
004 para 0 to 4 Bar
006 para 0 to 6 Bar
010 para 0 to 10 Bar
016 para 0 to 16 Bar
025 para 0 to 25 Bar

(4) Pressure Units seleccionar de:
A para Absolute pressure
G para Gauge pressure
S para Sealed gauge pressure

(5) Output seleccionar de:
V para 3 mV/V nominal
5T para 0 to 5 Vdc
I para 4 to 20 mA

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos