Dewpoint Transmitters Chilled Mirror Technology, Wall or Duct Mount - Discontinued

RHCM Series

Ver Todas los Modelos Abajo

No Routine Calibration Needed
Minimum Drift
±1°F Dewpoint Accuracy
24 Vdc, 24 Vac, 115 Vac ad 230 Vac Power Available
RTD Simulator or 4 to 20 mA Output

Descripción

The RHCM Series has been discontinued. Please see the RHB-CAC1S Series as a possible alternative or contact our Temperature Engineering department.

The RHCM series is a family of low cost, high performance chilled mirror dewpoint transmitters. The sensor provides accurate long term repeatability and high reliability performance for process control and energy management. The RHCM-10 sensor electronics are housed in a rugged enclosure which can be wall mounted for climate control. The RHCM-20 and RHCM-30 sensors are designed to be either pipe or duct mounted for process control in HVAC/Energy management applications. Field calibration is not required and the ambient temperature effects, hysteresis, and calibration drift with age are all virtually eliminated.

The RHCM series offer a wide range of user specified power inputs including 24 Vdc, 24 Vac, 115 Vac and 230 Vac, for many applications. The user specified outputs include 100½ platinum RTD (4-wire) or 4 to 20 mA, which can be scaled over three different temperature ranges of 0 to 100°F, 0 to 50°C and -40 to 140°F. Either output can be directly connected to a panel meter, controller or data acquisition system.

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

RHCM-10T-1-100F-100F

Consultar Ventas

Disponible en:

Wall mount dewpoint/temperature transmitter

TX4-100

MXN2,420.00

Disponible en: Disponible

4 conductor shielded transmitter cable (100 ft)

Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)		(2)		(3)	(4)
RHCM-		-		-

Opciónes de Descripción:

(1) Wall Duct or Pipe Mount seleccionar de:
10 para Wall mount
10T para Wall mount temperature
20 para Duct mount
30 para Pipe mount

(2) Power Supply Option seleccionar de:
1 para 24 Vdc
2 para 24 Vac
3 para 115 Vac
4 para 230 Vac

(3) Output Option seleccionar de:
PT100 para 100 ohm
100F para 4-20 mA (0-100°F)
50C para 4-20 mA (0-50°C)
140F para 4-20 mA (-40-140°F)

(4) Second Output Option seleccionar de:
Nada (dejar el campo en blanco) para Standard Unit
-PT100 para 100 ohm
-100F para 4-20 mA (0-100°F)
-50C para 4-20 mA (0-50°C)
-140F para 4-20 mA (-40-140°F) 2nd Output Option available for only Wall mount dewpoint/temperature transmitter

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos