RPL Series Gripper is a pneumatic parallel gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are front mounted and are supported with 'Dual-V" roller bearings to provide low friction motion and are preloaded for maximum support and zero side play. This gripper supports longer finger length designs compared to other grippers of similar sizes. These grippers are available in stroke lengths from 6.4 to 19.1mm (0.25 to 0.75") with a grip force from 116 to 160 N (26 to 36 lbs).
Linear motion pneumatic components are double acting cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.
TECHNICAL SPECIFICATIONS Pneumatic Specifications Pressure Operating Range: 0.3 to 7 bar(5 to 100 psi)
Cylinder Type: Dual double acting
Dynamic Seals: Internally lubricated Buna-N
Valve Required to Operate: 4-way, 2-position
Air Quality Requirements Air Filtration: 40 micron or better
Air Lubrication: Not necessary*
Air Humidity: Low moisture content (dry)
Temperature Operating Range Buna-N Seals (Standard): -35 to 80°C(-30 to 180°F)
FKMSeals (Optional): -30 to 120°C(-20 to 250°F)
Maintenance Specifications Expected Life: Normal Application: 5 million cycles
With Preventative Maintenance: 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes
*Addition of lubrication will greatly increase service life.
Todas las cantidades que se muestran en MXN Nota: All models come with standard synchronous jaws, if non-synchronous jaws are required consult sales. All sensors and cables sold sepatately. Ejemplo de pedido: (1) RPL-2M Mini pneumatic low profile gripper with jaw stoke of 12.7 mm (0.50''), MXN19,250.00