Quick Disconnect Handle/Thermocouple Probe Sets with High Impact ABS or Rugged Aluminum Handles

SDX-SET and HDX-SET Series

Quick Disconnect Handle/Thermocouple Probe Sets

^MXN2,480.00 SDX-SET-GP-J-SMP

HACER PEDIDO

Handles Supplied with 0.3m (1') Retractable Cable – Expands to 1.5m (5')!
In Stock with Subminiature Connector on Cable for Use with Handheld Thermometers
Free Mating Connector Included
SDX-UST Plastic Handle Accepts Both Standard and Miniature Probes/Connectors

Termopares - Ver Productos Relacionados

Descripción

General Purpose Probe:
General purpose immersion probe, 300mm 12" long, grounded junction, 1/8" O.D., 304 SS sheath. Rated to 900°C (1650°F).

Penetration Probe:
Conical tip for insertion into soft and semi-frozen material. 300mm (12") long, grounded junction, 4.5 mm (3/16") O.D. 304 SS. Tip rated to 900°C (1650°F).

Air Probe:
Exposed thermocouple element protected by 3/16" O.D. 304 SS sheath. Drilled end exposes bead to airflow for fast measurements. Constant diameter for easy insertion or mounting into duct work. 300mm (12") long. Rated to 870°C (1600°F).

Fast Response Probe:
Special reduced diameter (1/16") tip designed for fast response. Rugged 3 mm (1/8") O.D., grounded junction, 304 SS sheath. Tip rated to 900°C (1650°F).

Flexible Tip Surface Probe:
Flexible tip conforms to most surfaces for fast, repeatable, accurate measurements. Made from RTV silicone rubber for good thermal contact. 6mm (1/4") O.D. 304 SS sheath. 5/16 OD, overall. Tip rated to 260°C (500°F). Note: subjecting sensor tip to temperatures above 315°C (600°F) will result in tip damage.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

SDX-SET-GP-E-SMP

MXN2,525.00

Disponible en: 3 Semanas

Handle/Probe Set, SDX High Impact Plastic Handle, General Purpose Probe, E Calibration

SDX-SET-AP-J-SMP

MXN5,555.00

Disponible en: 3 Semanas

Handle/Probe Set, SDX High Impact Plastic Handle, Air Probe, J Calibration

SDX-SET-NP-E-SMP

MXN3,225.00

Disponible en: 3 Semanas

Handle/Probe Set, SDX High Impact Plastic Handle, Penetration Probe, E Calibration

HDX-SET-GP-K-SMP

MXN2,740.00

Disponible en: 3 Semanas

Handle/Probe Set, HDX Rugged Aluminum Handle, General Purpose Probe, K Calibration

HDX-SET-NP-T-SMP

MXN3,495.00

Disponible en: 3 Semanas

Handle/Probe Set, HDX Rugged Aluminum Handle, Penetration Probe, T Calibration

Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo

(1)		(2)		(3)
	-SET-		-		-SMP

Opciónes de Descripción:

(1) seleccionar de:
SDX para SDX High Impact Plastic
HDX para HDX Rugged Aluminum

(2) seleccionar de:
GP para General Purpose Probe
NP para Penetration Probe
AP para Air Probe
RT para Fast Response Probe
FSP para Flexible Tip Surface Probe

(3) seleccionar de:
J para J Type Thermocouple
K para K Type Thermocouple
E para E Type Thermocouple
T para T Type Thermocouple

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos