Socket-Weld Design Thermowell for 3/8 Inch Diameter Elements

SERIES 385W

^MXN1,225.00 3/4-385W-U21/2-BRASS

Available in Carbon Steel and Stainless Steel
Standard Insertion Lengths from 2 1/2 to 22 1/2 Inches
3/4 Inch and 1 Inch External Diameter

Vainas y asambleas de cabeza - Ver Productos Relacionados

Descripción

Application:
260W series fits standard length 1/4" diameter elements. 385W series fits standard length 3/8" diameter elements.

Connection:
3/4" or 1" nominal pipe size welding shoulder fits ASA welding fittings, flanges, etc. Wells for larger pipe size fittings are available upon request.

Materials:
Carbon Steel (C-1018); A.I.S.I. 304 & A.I.S.I. 316 are standard. Other materials are available upon request.

Lagging Extension:
When specifying lagging extension, choose a length which will permit the use of a standard element length. (See 260L and 385L lengths.)

Series 385W
All dimensions in inches.

* NPSM internal pipe thread will accept both NPT and NPS male threads.

Pipe Size P	Model No.	P	Stem Lgth. A	Insert. Lgth. U
3/4" Nominal (1.050" Dia.)	3/4-385W-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U16 1/2 -U22 1/2	1.050 1.050 1.050 1.050 1.050 1.050 1.050	4 6 9 12 15 18 24	2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 16 1/2 22 1/2
1" Nominal (1.315" Dia.)	1-385W-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U16 1/2 -U22 1/2	1.315 1.315 1.315 1.315 1.315 1.315 1.315	4 6 9 12 15 18 24	2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 16 1/2 22 1/2

Maximum Fluid Velocity—feet per second

Well Type	Material	Insertion Length – “U”
Well Type	Material	2 1/2	4 1/2	7 1/2	10 1/2	13 1/2	16 1/2	22 1/2
3/4" - 260W	Carbon Steel	290 (106)	123 (71.2)	44.9 (42.7)	22.8	13.8	9.3	4.9
3/4" - 260W	A.I.S.I. 304 & 316	300 (148)	128 (99.3)	46.4	23.6	14.3	9.6	5.1
1"- 260W	Carbon Steel	290 (106)	143 (84.3)	51.6 (50.6)	26.2	15.9	10.6	5.7
1"- 260W	A.I.S.I. 304 & 316	300 (148)	148 (117)	53.5	27.2	16.5	11	5.9
3/4" - 385W and 1"- 385W	Carbon Steel	426 (260)	192 (144)	69.5	35.4	20.5	14.3	7.7
3/4" - 385W and 1"- 385W	A.I.S.I. 304 & 316	449 (360)	199	71.9	36.6	21.2	14.8	8

Where single values appear in the velocity tables, these may be considered safe for water, steam, air or gas. In the shorter insertion lengths, consideration is given to the velocity pressure effect of water flowing at higher velocities. The values in parentheses, therefore, represent safe values for water flow, while the unbracketed values may be used for steam, air, gas and similar density fluids.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

3/4-385W-U21/2-304SS

MXN1,505.00

Disponible en: Disponible

Socket-Weld Design Thermowells, External Diameter 3/4", Insertion Length Dimension 2 1/2", 304 SS

3/4-385W-U41/2-BRASS

Consultar Ventas

Disponible en:

Socket-Weld Design Thermowells, External Diameter 3/4", Insertion Length Dimension 4 1/2", Brass

3/4-385W-U71/2-CS

MXN2,315.00

Disponible en: Disponible

Socket-Weld Design Thermowells, External Diameter 3/4", Insertion Length Dimension 7 1/2", Carbon Steel

Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo

(1)		(2)		(3)
	-385W-U		-

Opciónes de Descripción:

(1) External Diameter seleccionar de:
3/4 para 3/4 in.
1 para 1 in.

(2) Insertion length dimension seleccionar de:
21/2 para 2 1/2 in.
41/2 para 4 1/2 in.
71/2 para 7 1/2 in.
101/2 para 10 1/2 in.
131/2 para 13 1/2 in.
161/2 para 16 1/2 in.
221/2 para 22 1/2 in.

(3) Material seleccionar de:
304SS para 304 SS
316SS para 316 SS
CS para Carbon Steel
BRASS para Brass

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos