Miniature and Standard Protection Tubes

SS-() and INC-() Series

Ver Todas los Modelos Abajo

HACER PEDIDO

Available in 316 Stainless Steel or Inconel 600
6 Inch Length Standard, Other Lengths are Available
Available With Open or Closed Ends

Termopares - Ver Productos Relacionados

Descripción

OMEGA™ Miniature and Standard Protection Tubes are available in 316 stainless steel and Inconel 600 nickel alloy. Tubes are available either open at both ends or with one end closed. Standard length available from stock is 6 inches; however, practically any length tube is available on short delivery.

OMEGA’s protection tubes are intended for use with OMEGA’s fine or heavy gage thermocouples and ceramic insulators, as well as OMEGA’s standard thermocouples made from OMEGACLAD™ thermocouple wire. These items are shown in Section A of this catalog. Bare wire thermocouples can be insulated using OMEGATITE™ ceramic insulators as well as the insulators used in replacement elements.

OMEGA’s protection tubes can be conveniently secured into pipes, vessels, and chambers by using OMEGALOK™ compression fittings.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

SS-116-6OPEN

MXN330.00

Disponible en: 3 Semanas

Stainless steel tube, 1/16 inch O.D., 6 inch length, open ended

SS-116-6CLOSED

MXN470.00

Disponible en: 3 Semanas

Stainless steel tube, 1/16 inch O.D., 6 inch length, closed ended

SS-316-6CLOSED

Consultar Ventas

Disponible en:

Stainless steel tube, 3/16 inch O.D., 6 inch length, closed ended

SS-14-6OPEN

MXN330.00

Disponible en: Disponible

Stainless steel tube, 1/4 inch O.D., 6 inch length,open ended

SS-14-6CLOSED

MXN470.00

Disponible en: Disponible

Stainless steel tube, 1/4 inch O.D., 6 inch length, closed ended

Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo

(1)		(2)		(3)
	-		-6

Opciónes de Descripción:

(1) Tube Material All tubes above are 6 inches long seleccionar de:
SS para 316 Stainless Steel
INC para Inconel 600

(2) Tube O.D. seleccionar de:
116 para 1/16 inch
18 para 1/8 inch
316 para 3/16 inch
14 para 1/4 inch
516 para 5/16 inch
38 para 3/8 inch
716 para 7/16 inch
12 para 1/2 inch

(3) End Configuration seleccionar de:
CLOSED para Closed End
OPEN para Open End

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos

Miniature and Standard Protection Tubes

SS-(*) and INC-(*) Series

SS-() and INC-() Series