Terminal Pads, Completion Resistors, Cold Cure Adhesives, Heat Curing Adhesive, and Resistance Wire for Temp Compensation/Zero Balance

Strain Gage and Transducer Accessories

Ver Todas los Modelos Abajo

Bridge Completion Resistors
Strain Gage Adhesives
Resistance Wire for Temperature Compensation and Zero Balance

Extensómetros, accesorios y instrumentación - Ver Productos Relacionados

Descripción

FIXED BRIDGE COMPLETION RESISTORS
Accuracy:0.1%
Temperature Compensation: 5 ppm (-20 to 80°C/-4 to 176°F)
Power: 1 /4 watt.

ADHESIVES
SG496 and SG401 are general purpose cold-curing one-part glues. They are the easiest and most commonly used adhesive for strain gages. They cure in one minute, but require 24 hours to set. SG401 is an ethyl-based cyanoacrylate and SG496 is a methyl-based cyanoacrylate. There is a one-year shelf life at cool room temperature, but increased shelf life can be obtained by cold storage. The glue temperature range is -65 to 180°F (-54 to 82°C).

NOTE: Additional Hazardous Materials carrier handling surcharges may apply for adhesive products on this page. You will be contacted by Internet Sales to confirm after the order is placed.

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

RES-120

MXN560.00

Disponible en: Disponible

120 Ohm bridge completion resistors

RES-250

MXN540.00

Disponible en: Disponible

250 Ohm bridge completion/4-20 mA shunt resistors

RES-350

MXN530.00

Disponible en: Disponible

350 Ohm bridge completion resistors

SG496

MXN1,385.00

Disponible en: Disponible

1 oz. ethyl-based cyanoacrylate adhesive (bonds approx. 50 gages)

SG401

MXN435.00

Disponible en: Disponible

0.1 oz. ethyl-based cyanoacrylate adhesive (bonds approx. 50 gages)

SGB-36

MXN3,565.00

Disponible en: Disponible

36 gage Balco wire (500 ft) for zero and span temperature compensation, 19.7 Ohms/ft, temp. coefficient 0.45%/°C

SGC-36

Consultar Ventas

Disponible en:

36 gage Copper wire (500 ft) for zero and span temperature compensation, 0.415 Ohms/ft, temp. coefficient 0.39%/°C

SGM-36

MXN1,195.00

Disponible en: 8 Semanas

36 gage Manganin wire (200 ft) for zero balance, 15.2 Ohms/ft, temp. coefficient 0.002%/°C

TT300

Consultar Ventas

Disponible en:

Adhesives

Todas las cantidades que se muestran en MXN
Nota: TT300 KIT INCLUDES:
(2) 1 oz. resin bottles ( 1 /2 filled)
(2) 1 oz. hardener bottles ( 1 /2 filled)
(2) plastic funnels (35 mm diameter)
(2) brush caps
(1) 2 oz. bottle of acetone
(1) 2 oz. bottle of acid primer
(1) 2 oz. bottle of neutralizer
(1) 2 oz. bottle of resin solvent
(1) manual

Manuales de Productos:

Descarga TT300 Series - Adhesive Kit

Descarga SG401 and SG496 - Rapid Cure Strain Gauge Adhesives

Descarga TT300 Series - Adhesive Kit

Descarga SG401 and SG496 - Rapid Cure Strain Gauge Adhesives

Productos Relacionados: