Zero-Differential Pressure Ideal for Gravity Feed Processes
Available in Brass or Stainless Steel
Process Temperature Range to 130°C (266°F)
The SV-350 Series has been discontinued. Please see the SV3500 Series as a possible alternative or contact our Flow Engineering Department.
SV-350 Series 2-way solenoid valves are internally piloted valves with diaphragm and forced lifting which open fully from 0 PSI pressure differential. The valves feature brass or stainless steel body with high flow rates, FKM seal material, and a temperature range from -10 to 130°C (14 to 266°F). The valves are ideal for neutral media such as water, compressed air, and hydraulic oil (viscosity approx. 2.3 x 10 -4 ft 2 /sec). Electrical connection is by conduit plug.
SPECIFICATIONS Mounting Position: Any (preferably with solenoid system upright) Max Ambient Temp: 54°C (130°F) Operating Voltage: 120 Vac Voltage Tolerance: ±10% Power Consumption in Warm State: Opening Time (ms): 100 to 1000 Closing Time (ms): 700 to 4000 (switching times are measured using water and are dependent on valve orifice size and fluid pressure and viscosity) Cycling Rate: Approx. 10 to 20 cpm Duty Cycle: Continuous (100%)
Todas las cantidades que se muestran en MXN Nota: Comes complete with operator's manual.
* The SV-359 is not UL listed.
We noticed you are from the US. Visit your local site for regional offers and live support.