OMEGA-FLO™ 2-way Anti-water Hammer Solenoid Valves 1/2 " to 2 1/2 " NPT

SV-600

Ver Todas los Modelos Abajo

Slow Closing, Anti-Water Hammer Design
Process Temperatures to 90°C (194°F)
Works for Gases or Liquids
120 Vac Standard (dc Optional)

Descripción

The SV600 Series has been discontinued. Please see the FSV40 Series as a possible substitute or contact our Flow and Environmental department.

SV-600 Series 2-way solenoid valves are internally piloted, with epoxy-encapsulated coil. The valves have a brass body with high flow rates and FKM seal material. A temperature range of -10 to 90°C (14 to 194°F) makes these valves ideal for neutral media such as compressed air, natural gas, water, hydraulic oil, oils and fats with no additives (max. viscosity approx. 4 x 10 -4 ft 2 /sec). Electrical connection is by cable plug. Options (no extra charge): Ordering Suffix Description -24VDC 24 Vdc operation -12VDC 12 Vdc operation -240VAC 240 Vac operation -BUNA Buna-N seal -EPDM EPDM seal.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

Normally Open Valve

SV-611

Consultar Ventas

Disponible en:

1/2 "NPT Cv= 4.7 7 to 170psi 1/2" orifice

Todas las cantidades que se muestran en MXN
Nota: All units are 120 Vac standard. Operation with less than a 7 psi pressure differential will yield unpredictable flow characteristics. Comes with complete operator’s manual.
* The SV-604, SV-615, and SV-616 are not UL listed.

Please download PDF for compelte list of available products.