Programmable Stepper Drive with Integrated Power Supply

Si3540

Programmable Stepper Drive

Ver Todas los Modelos Abajo

HACER PEDIDO

3.5 A, 40 Vdc
110/220 Vac Input, 50/60 Hz Switch Selectable
Microstepping 2000 to 50,800 Steps/Rev
Idle Current Reduction Software Selectable: 0, 25, 50, or 100%
Software Selectable Motor Current 0.2 to 3.5 A/Phase
Eight Optically Isolated Inputs 5 to 24 Vdc
Three Optically Isolated Outputs 12 to 24 Vdc, 100 mA max
One Optically Isolated Output 5V, Dedicated to Fault Out
Download, Store and Execute Programs Using Si Programmer (Free Download)
Mating Connectors Included
Sample Motion Programs Available by Request

Transmisores y motores - Ver Productos Relacionados

Descripción

The Si3540 is a programmable step motor drive/indexer packaged in a rugged steel and aluminum enclosure. Integral power supply, heat sink, mounting brackets, switch covers and connectors are included with each Si3540. The Si3540 comes with all operating software necessary to create a complete step motor-based motion control solution.

The Si3540 includes Applied Motion Products' Windows-based Si Programmer™ software application for quick set up and ease of use. Si Programmer™ is ideal for stand-alone operation. For users with software development expertise, the Si3540 can also be used with Applied Motion's Si™ Command Language (SCL). SCL allows for control of an Si drive, like the Si3540, via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks via a host serial device.

Multiple axis applications can be handled with the SiNet™ Hub Programmer software, which gives you the ability to control up to 4 "Si" or "i" drives, stepper and servo, from just one SiNet™ Hub 444. Not only can you sequence up to four motors, but a SiNet™ Hub 444 also has access to the inputs and outputs of all the drives connected to it, providing your program with up to 32 inputs and 12 outputs. In addition, the Hub 444 provides 4 digital inputs and 4 digital outputs of its own. You can also use Applied Motion's MMI-01 to interface the drives with the machine operator.

Factory set to operate at 110 VAC input, the Si3540 can be set by the user to operate at 220 VAC input by a simple switch selection.

Pluggable screw terminal blocks are provided for the I/O, motor, and AC power input. Mating connectors, programming cable with computer interface connector, as well as all operating software are provided with each Si3540 drive.

The Si3540 is both CE and TUV compliant.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.

NOTE: Power cord not included. See Accessories below to order.

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

Si3540

Consultar Ventas

Disponible en:

Programmable step motor drive with integral power supply

Recommended Motors

OMHT17-075

MXN3,715.00

Disponible en: 10 Semanas

NEMA 17, 62.8 oz-in holding torque

OMHT17-275

MXN2,725.00

Disponible en: 4 Semanas

NEMA 17, 62.3 oz-in holding torque

OMHT17-278

MXN3,220.00

Disponible en: 2 Semanas

NEMA 17, 113 oz-in holding torque

OMHT23-393

Consultar Ventas

Disponible en:

NEMA 23, 76.6 oz-in holding torque

OMHT23-593

MXN3,220.00

Disponible en: 4 Semanas

NEMA 23, 79.3 oz-in holding torque

OMHT24-100

MXN3,615.00

Disponible en: 4 Semanas

NEMA 24, 123 oz-in holding torque

OMHT23-397

Consultar Ventas

Disponible en:

NEMA 23, 177 oz-in holding torque

OMHT23-597

MXN3,585.00

Disponible en: 8 Semanas

NEMA 23, 177 oz-in holding torque

OMHT23-400

Consultar Ventas

Disponible en:

NEMA 23, 264 oz-in holding torque

OMHT23-600

MXN5,285.00

Disponible en: Disponible

NEMA 23, 264.8 oz-in holding torque

Accessories

HUB 444 DIN RAIL

Consultar Ventas

Disponible en:

Multi-axis network hub with DIN rail mounting kit

MMI-01

Consultar Ventas

Disponible en:

Operator Interface

OM-CONV-USB

MXN765.00

Disponible en: Disponible

USB to RS232 Interface Converter; USB-A to DB9-male

OM-PL-USBS

Consultar Ventas

Disponible en:

USB to RS232 converter; works with Windows Vista and Windows 7.

Power Cord-SE

MXN382.00

Disponible en: 3 Semanas

AC Power cord with stripped end termination

Power Cord-SE-M16

MXN545.00

Disponible en: Disponible

8' Power cord with M16 cable gland strain relief, 3x16 AWG, 250Vac max.

SI-PROG-CBL

MXN990.00

Disponible en: Disponible

Replacement programming cable (comes with drive)

DRIVE-CBL

Consultar Ventas

Disponible en:

Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)

DSUB-9-MF

Consultar Ventas

Disponible en:

DIN rail interface module, 9-pin

DSUB-9-MF-CBL

MXN1,520.00

Disponible en: Disponible

DSUB cable, 9-pin, 2 m (6.6'), male/female connectors

Todas las cantidades que se muestran en MXN
Nota: Programming cable and mating connectors are included. Programming software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
Ejemplo de pedido: (1) OM-CONV-USB USB to RS-232 Interface Converter, MXN765.00

Manuales de Productos:

Descarga Si3540 Series - Programmable Step Motor Driver Hardware Manual

Descarga STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives

Productos Relacionados: